Used Machine Tools in Aichi, Japan

2007 Okuma LCS-250

• Manufacturer: Okuma
• Model: LCS-250

OSP-P20L, Swing over the bed: 450mm, Maximum processing: φ270*280mm, S: (X)155*(Z)320mm, 100 to 4200rpm, Octagonal turret, Pin arbor chuck (Imperial OPA-100), No tailstock, No tailstock, with chip control, No gan...

2001 Okuma LCS-25

• Manufacturer: Okuma
• Model: LCS-25

OSP-E10L(Rakuraku Dialog),. Swing over bed: 520mm,. Max. processing:φ310*480mm S:X220*Z520mm, 25～3000rpm, 12-corner turret, Without center press, 10-inch chuck 10-inch chuck (HOWA H037M10) With chip-con (back dis...

2001 Okuma LCS-25

• Manufacturer: Okuma
• Model: LCS-25

OSP-E10L(Raku-Raku Dialogue), Swing over bed: φ520, Maximum processing: φ310*480, S:X220*Z520, 25~3000rpm, 12 square turret, No tailstock, 10-inch chuck (HOWA H037M10), Chip control (backward), Equipped with gant...

1998 Miyano BNE-34S3

• Manufacturer: Miyano
• Model: BNE34S3

2-turret, 2-spindle type, FANUC-18T, FANUC-18T, FANUC-18T, FANUC-18T FANUC-18T, Max. machining: φ34*90mm, L main spindle: 170~5000rpm L main spindle: 170 to 5000 rpm Turret: 10 square, S:(X)115*(Z) S:(X)115*(Z)12...

2000 Alps AX-5

• Manufacturer: Alps

3m specification,. Material diameter: φ18 to φ60mm, flat 16 to 46mm, Used for Mazak INTEGREX In case of any discrepancy between the description and the actual product, the actual product will be given priority.

BOSCH / Bosch GSC 2.8

• Manufacturer: Bosch
• Model: GSC 28

Single phase AC 100 V (50/60 Hz), Number of strokes: 2500 min, Minimum curve Cutting radius: 20 mm, Cutting capacity: (mild steel plate) 2.8 mm (stainless steel) 2.0 mm (aluminum) 3.5 mm ※ If there is a differenc...

2006 Mori Seiki NZ-S1500

• Manufacturer: Mori Seiki
• Model: NZ-1500

Suitable for Shaft Machining, MSC-700(FANUC-32iA) MSC-700(FANUC-32iA), Max. Max. machining: φ120*535mm, Standardized bore size: φ20-60mm Standardized bore size: 20 to 60mm dia. S: (X1)60*(X2)60*(Z1)580*(Z2)580mm,...

Kitagawa Iron Works KBT-360

• Manufacturer: Kitagawa

Drilling: 13mm,. Tap: (steel)10mm In case of any discrepancy between the description and the actual product, the actual product will be given priority.

DELUXE 909

• Manufacturer: DELUXE

※ If there is a difference between the description content and actual item, we will prioritize the actual item.

2016 Tsugami M06SY

• Manufacturer: Tsugami
• Model: M06SY

FANUC-0iTD,. Max. machining: ø260/ø51 (bar material)*380mm, Main spindle through-hole diameter: φ73mm Main spindle 4500rpm, Rear spindle 4500rpm Back side 4500rpm, Milling 5000rpm Milling 5000rpm, 12 square turre...

Mitsui JC8MA

• Manufacturer: Mitsui Seiki

NEWS TCT-500

• Manufacturer: NEWS

φ 500, Tilt angle: 0 to 90 °, With base

2004 HOWA OHKUMA 3SP-15HG

• Manufacturer: Okuma

FANUC-18iTB, Max. processing: φ150*115mm, 40～4000rpm, Each octagonal turret, S:X175*Z155mm, Each 8-inch 3-jaw chuck (HOWA H3KT8), With gantry & stocker, With chip conveyor In case of any discrepancy between the d...

2004 Mori Seiki RL-153

• Manufacturer: Mori Seiki

MSG-803L(MELDAS64) with dialogue function, Maximum swing: 334mm dia, Distance between spindles:340mm, Max. machining: φ220*150mm, S: (X)130*(Z)150mm, 60 to 6000rpm, Decapod turret*2, Left pin arbor chuck (O.D. gr...

1997 Techno-Washino LN-32N

• Manufacturer: Washino

FANUC O-TC, Swing on bed: φ490mm, Swing on reciprocating table: ø260mm, Distance between centers: 800mm, Distance between centers: ø260mm, Distance between centers: ø260mm Distance between centers: 800mm, Main sp...