Used Machine Tools in Aichi, Japan

Hitachi Press, Sheet metal welding related machinery / Band saws, Contour machines, Metal saws, etc. Steel frame related machinery / Metal saws
- Manufacturer: Hitachi
※ If there is a difference between the description content and actual item, we will prioritize the actual item.
Toyohashi, Japan
2000 Amada Wasino MEISTER
- Manufacturer: Amada - Wasino
- Model: MEISTER
FANUC 20-F,. T:450*150mm, Electromagnetic chuck (350*150mm) S:X480*Y180mm, Grinding wheel: (OD)φ205*(W)6.4-25*(ID)φ31.75mm, Rotation speed: 500 to 5000 rpm, Equipped with a water suction device (paper type) In ca...
Toyohashi, Japan
2003 Elenix (Amada) ST300C (SH-3D)
- Manufacturer: Amada
S: (X)300*(Y)200*(Z)300mm, Electrode mounting diameter: φ0.3~3.0mm, Size of the processing tank: (W)450*(D)400*(H)190mm, Processing liquid circulation system has been replaced. In case of any discrepancy between ...
Toyohashi, Japan
2011 Mori Seiki NVX 5060/40
- Manufacturer: Mori Seiki
- Model: NVX 506040
M730BM(Mitsubishi MELDAS)MAPPS, S:X600*Y530*Z510mm, Distance from table top to spindle end: 150 to 660mm, T:900*600mm, BT40, ATC: 30 pcs, 8000rpm, Chip-con, fixture & hydraulic unit included, With 1.5MPa spindle ...
Toyohashi, Japan
1996 mazak mtv-515/40n
- Manufacturer: Mazak
- Model: MTV-515/40N
MAZATROL M PLUS, Simultaneous 4-axis control, With additional axis index (Tsudakoma RNCM-250L), S: (X)1050*(Y)510*(Z)560mm, T:1300*550mm, 25 to 6000rpm, BT50, ATC:30 pcs, Half cover, Separate storage cover availa...
Toyohashi, Japan
2003 Mazak VARIAXIS630-5X
- Manufacturer: Mazak
- Model: VARIAXIS 630-5X
2APC, MAZATROL640M-5X, BT40, S:X630*Y765*Z510, A-axis: 0.001°indexing, -120°to +30°, C-axis: 0.001°indexing, ±360°, C-axis: 0.001°indexing, ±360°, 35 to 12000rpm, T:500*500, ATC: 30 pcs, With chip controller, Too...
Toyohashi, Japan
Yoshiki Press, sheet metal welding related machines / Press turret punch / [Bid No. 710] Kick-off
- Manufacturer: Yoshiki
80 pieces *If there are any discrepancies between the listed product and the actual product, the actual product will take precedence.
Toyohashi, Japan
1984 Fujita Corporation DG03B
- Manufacturer: Fujita Seisakusho
Applicable range: φ0.3 to 4 mm If there is any discrepancy between the description and the actual product, the actual product will take priority.
Toyohashi, Japan
OSG WXS-LN-EBD
- Manufacturer: OSG
New and unused , R0.05・R0.2・R0.25・R0.3・R0.4・R0.5・R0.75・R1・R1.25・R1.5・R1.75・R2・R2.5 If there is any discrepancy between the description and the actual product, the actual product will take priority.
Toyohashi, Japan
Hitachi CNMG 120412-AB
- Manufacturer: Hitachi
Material: GM25 Amount of money: ¥ 3,000
Toyohashi, Japan
Hitachi CNMG 120412-AR
- Manufacturer: Hitachi
Material: GM25 Amount of money: ¥ 3,000
Toyohashi, Japan
Hitachi CNMG 120412-V
- Manufacturer: Hitachi
Material: HC 5000 Amount of money: ¥ 3,000
Toyohashi, Japan
Hitachi Seiko FE-300H
- Manufacturer: Hitachi
Method: internal pressure · Outside diameter × inner diameter × height: 300 × 46 × 340
Toyohashi, Japan
Tokyo Diamond SDC 140/170-N-B-20
- Manufacturer: SDC
Outer diameter: 300 mm, Inside diameter: 51mm If there is any discrepancy between the description and the actual product, the actual product takes precedence.
Toyohashi, Japan
2007 Mitsui High-tec MSG-618PC-NC
- Manufacturer: MHT
3-axis control (simultaneous 2-axis), T:480*150mm, Electromagnetic chuck: 300*150mm (Kanetec KET-1530B-M), S:X500*Y190mm, Grinding wheel φ205*20*φ31.75mm, With water injection dust collector If there is any discr...
Toyohashi, Japan