Machine Tools » Grinding machines » Saxony

Building Filters

9

Used threading in Saxony, Germany

Trusted Seller
FEIN angle grinder
- Manufacturer: Fein
Angle grinder, long-neck angle grinder, compact angle grinder, low-voltage tool FEIN MSfv 649 0.75 kW 12,000 rpm 220 V 1AC 50 Hz Used, tested, similar to the picture!
$341 USD
Zschepplin, Germany
Trusted Seller
FEIN angle grinder
- Manufacturer: Fein
Angle grinder, long-neck angle grinder, compact angle grinder, low-voltage tool FEIN MSfv 749 0.75 kW 12,000 rpm 42 V 1AC 50 Hz Used, tested, similar to the picture!
$294 USD
Zschepplin, Germany
Trusted Seller
EX-CELL-O grinding spindle
- Manufacturer: Ex-Cell-O
Grinding spindle EX-CELL-O Type 771.860.5 Shaft diameter: 40 mm, length: 80 mm, thread: M40 x 1.5 Mounting flange Drive flange Used, tested!
$1,634 USD
Zschepplin, Germany
Trusted Seller
CZ Grinding spindle
- Manufacturer: Pagus
Grinding spindle CZ IBC 80 250 T Tool holder: 10 mm, length: 10 mm Internal thread: M5 x 0.8, depth: 25 mm Tool holder (screw-on): 10 mm, length: 15 mm Internal thread: M6 x 1.0, depth: 20 mm Flat pulley: 40 mm, ...
$552 USD
Zschepplin, Germany
Trusted Seller
DKF grinding spindle
- Manufacturer: DKF
grinding spindle DKF 3.8 - 7/1 (3.8-7/1) TGL 4870 (TGL4870) �� 80mm M15 x 1.0 left-hand thread
$617 USD
Zschepplin, Germany
Trusted Seller
DKF grinding spindle
- Manufacturer: Pagus
Grinding spindle DKF 2.6 - 4 / 1 ( 2.6-4/1 ) TGL 4870 ( TGL4870 ) 60 mm Drive: 17.9 mm; 17.9 mm; Thread: M10 x 1
$447 USD
Zschepplin, Germany
Trusted Seller
SFJ grinding spindle
- Manufacturer: Pagus
Grinding spindle SFJ HJ860 Tool holder: 9 mm, length: 15 mm Internal thread: M5 x 0.8, depth: 25 mm Flat pulley: 30 mm, width: 25 mm, barrel-shaped Used, tested!
$564 USD
Zschepplin, Germany
Trusted Seller
RAY AG Grinding head
- Manufacturer: RAY AG
Grinding head, motor spindle, spindle motor RAY AG Zurich 6000 - 15000 rpm Machine side: Flange diameter: 150 / 116 / 72 mm All threaded holes: M6 x 1.0, depth: 12 mm With accessories and wooden box Used, tested!
$1,011 USD
Zschepplin, Germany
Trusted Seller
PAGUS sanding block attachment
- Manufacturer: Pagus
Bench Grinder Attachment PAGUS Motor: Type D 4/2 (D4/2) 0.3 kW 2850 rpm 220/380 V 3AC 50 Hz Spindle: 70 mm, Length: 200 mm Outer Taper: Diameter: 34/28 mm, Length: 34 mm with Thread: M24 x 1.5, Length: 17 mm Moun...
$329 USD
Zschepplin, Germany