Used compactor in Wallonia, Belgium

Roller curve 600 mm, 90°

Double range roller curves 90° For heavy rollers axles Ø 35mm

Roller curves 90°, 600 mm

Roller curves with 2 ranges rollers Ø 89 mm, width 290 mm Axles Ø 19 mm is flattened to 14 mm

Ground compactor, Ø 1050 mm

1 compacting vibrating plat for bottoms lining of furnaces and bigger ladles Vibrating motor BOSCH, type 04008, 2850 rpm, 800 W, 220/380 V

roller conveyers on feet +/- 200mm

Diameter 89mm, Axis diameter 20mm, axis distance 185mm

Roller transfer carriage 1700 × 1000 mm

Dimensions: Lenght: 1900mm; Width: 1800mm; Hight: 820mm roller width 1000mm between axles 150mm

Roller tables 1225mm x 560mm, Ø 85mm

Not motorized, axis distance 90mm Roller Ø 85mm Weight: 250 kg | Outside dimensions: 1225mm x 680mm, h. 860mm | Useful dimensions: 560mm x 830mm

Steep beltconveyor roller length 700mm, Ø 89mm

Tap dimensions of the rolls ± 145 mm, Ø of the rolls 89 mm Axle ± 20 mm, corner 100 x 50 mm 1 x 1,9 m 1 x 2,4 m

Roller conveyers, new, w. 560mm, with foots

Outside dim.. : L 2440mm, w. 590mm, H. 180mm, us.dim..: w.56mm , weight: 90 Kg/pc diam of roller 79mm.

300 roller for conveyor 800 mm. Ø 89 mm

Rolls length 800 mm, Ø 89 mm, for transporter of rolls

Small grinding table with exhauster

Useful dimensions: width 800 mm, depth: 800 mm Motor 0,25 kW, 220/380 V Grinding table with exhauster, outlet inside 200 mm x 250 mm With grating

Small sandhopper, ± 1 m³

On 4 feet with overpressure valve Weight: ± 400 kg | Outside dimensions: 1530 mm x 1130 mm, h. 3500 mm | Useful dimensions: 1250 mm x 850 mm, 1450 mm | Outlet height above the ground: ± 1900 mm

Small vibrating dose conveyor

• Manufacturer: Kleine

Magnet vibrator Weight: ± 300 kg | Outside dimensions: 2.600 mm x 630mm, h. 650mm | Inside dimensions: ± 2300mm x 200mm, h. 60mm | Motor sinex, serial number: 28463A3, 220/380 V

Small round coating basin ±0,35m³

External dimensions: length: 1500mm; width: 950mm, height: 1530mm Usable dimensions: Ø850mm; depth: 700mm Capacity ±0.35m³ For water sizing With 1 agitator; 0.37 kW With forklift feet and castors

Small sand hopper up foots ±2m²

Dimensions: Length: 1510mm; Width: 1460mm; Height: 2150mm Usable dimension: Length:1250mm; Width: 1250mm; Height: 820/590mm Contenance ± 2m³, outlet without fastener 210×210mm, with grating screen on the top Co...

Small permanent drum magnet with drive

• Manufacturer: BMD

External dimensions: length 900 mm, width 570 mm, height 1180 mm Engine BAUER: 380 V; 0,5 CV; type: reducer drum speed 175 rpm/min in solid housing drive over 2 V-belts 2 outlets for separating