Processing » Foundry & Casting » Belgium

Building Filters

19

Used second hand forklift in Belgium

Trusted Seller
Casting ladle with planetary gear and feet for lifttrack, 2,5 t, teapot
- used
With feet for lifttrack and with lining With teapot spout 4 sides in metal sheet
Amel, Belgium
Trusted Seller
1998 Teapot spout ladle with planetary gear and feet for lifttrack, 3 t
- used
With feet for lift track and good lining 4 side metal sheet
Amel, Belgium
Trusted Seller
Core transport trolley, 3 supports, FREIMUTH
- used
Year of construction: 2008, weight: ± 300 kg With 4 wheels and 2 forklift pockets With 2 supports flapping upwards by gas springs
Amel, Belgium
Trusted Seller
2001 Coating basin stainless steel ±1,5 m³
- used
External dimensions: length: 1700mm; width: 1400mm, height: 1850mm Useful dimensions: length: 1600mm; width: 1300mm; height: 800mm Capacity ±1.5m³ WITHOUT agitator With substructure + forklift feet Trolley movabl...
Amel, Belgium
Trusted Seller
2001 Coating basin stainless steel ±1,5m³
- used
External dimensions: length: 1700mm; width: 1400mm, height: 1850mm Useful dimensions: length: 1600mm; width: 1300mm; height: 800mm Capacity ±1.5m³ For water coating With 1 agitator; 3 kW With substructure + forkl...
Amel, Belgium
Trusted Seller
Furansand mixing plant FRANK
- used
700 rpm Mixer installed in a framework with 2 mobil bunkers, each 1,5 m³ useful content To pose with the lift truck With 2 pumps, resin injection and cat, 2 speeds, mixing screw Ø 130 mm, between entry and exit 8...
Amel, Belgium
Trusted Seller
Bottom pouring ladle ROPER, 3,5 - 4 t
- used
Useful Ø 1140mm, useful height 1140mm Wth oil bath gearbox, lining and lifting bail protection
Amel, Belgium
Trusted Seller
Treatment ladle SOPAME ±3t
- used
- Manufacturer: SOPAME
Useful dimensions: Ø800mm, height: ±1400mm With 2 pouring spouts With heat protection With 2 lifting anchors at the corners of the swivel arm With oil bath worm gearbox
Amel, Belgium
Trusted Seller
Pouring ladle UTARD, ±350kg, motorized
- used
Dimensions: length: 1080mm; width:830mm; height: 1170mm Useful dimensions : Ø550mm; Height: 520mm Brand: SEW; Type: gear box; 0,22KW; 30 und 62r/min; 400V With cable and hand switch With present refractory with 2...
Amel, Belgium
Trusted Seller
Vibrating table 1300 x 1050 x 850mm
- used
Motor CASADIO type vibrator 2 x 2 Kw, 3060 rpm, serial number 263921, 220/380 V Lifting over 4 pneumatic ball, control over pedals Fixing of the model pattern over solid driven pistons With 2 rolling tabls, total...
Amel, Belgium
Trusted Seller
Casting ladle, ± 2,3 t, COLLIN
- used
With with oilbath gearbox With ring of lifting Outside dimensions: 1900mm x 1100mm, h. 2100mm | Useful dimensions: Ø 1000mm, H (without concrete) 1050mm
Amel, Belgium
Trusted Seller
2018 Pouring ladle ACETARC, with transport foot, ± 1600 kg
- used
External dimensions: length 1600mm, width 1350mm, height 1700mm With useful lining With one long and one small spout With bold-on trunnions With transport foot for lift tracs With heat protection With type plate ...
Amel, Belgium
Trusted Seller
1998 Core shooter LAEMPE LB20
- used
- Manufacturer: Laempe / Röperwerk
Hydraulic clamping of core boxes on the table Upper part regulated over end switch Table lift and side clamping via electronic path measuring system Core box dimensions and weights Maximum gassing area with gassi...
Amel, Belgium
Trusted Seller
1998 Core shooter LAEMPE with core mixer LAEMPE SM6_3
- used
- Manufacturer: Laempe / Röperwerk
Hydraulic clamping of core boxes on the table Upper part regulated over end switch Table lift and side clamping via electronic path measuring system Core box dimensions and weights Maximum gassing area with gassi...
Amel, Belgium
Trusted Seller
1998 Core shooter LAEMPE with core mixer LAEMPE SM6_3
- used
- Manufacturer: Laempe / Röperwerk
Hydraulic clamping of core boxes on the table Upper part regulated over end switch Table lift and side clamping via electronic path measuring system Core box dimensions and weights Maximum gassing area with gassi...
Amel, Belgium

12