2017 ROBAMAT 2212
used
- Manufacturer: ROBAMAT
Used Robamat heating and cooling unit for use on die casting machines. This dual-circuit device is designed for the temperature control of a die casting tool with water. The device was checked, serviced and repai...
Schorndorf, Germany
1993 RAUCH MO 50 E
used
- Manufacturer: Rauch
used oven make Rauch type MO50E incl. used cast iron crucible and substructure as well as control cabinet heating capacity 17,5kW at 3x400V 50Hz suitable for DAW 40 and DAW 50
Schorndorf, Germany
2014 FRECH ZC200/250
used
- Manufacturer: Frech
Used machine furnace make Meltec type ZC 200/250 for use on hot chamber die casting machines make Oskar Frech DAW 200 for processing zinc alloys. Melting capacity per hour 250kg/h 36 kW connected load. Switch cab...
Schorndorf, Germany
2024 FRECH W80Zn-RC
used
- Manufacturer: Frech
Equipment of the machine 1.0.2 Closing part cover on the base frame for scales / chute 1.1.0 Motorized safety door in casting direction left 1.4.0 Machine bearings 1.5.4 Machine interior lighting 1.11.0 Equipment...
Schorndorf, Germany
2000 FRECH DAW 80S
used
- Manufacturer: Frech
Overhauled die casting machine DAW 80 GO on DataLogic control for the use of zinc alloys. Available on request.
Schorndorf, Germany
2024 FRECH W50Zn-RC
used
- Manufacturer: Frech
Equipment of the machine 1.0.1 Locking part cover on the base frame 1.0.2 Closing part cover on the base frame for scales / chute 1.1.0 Motorized safety door in casting direction left 1.4.0 Machine bearings 1.5.4...
Schorndorf, Germany
1992 FRECH DAW 50
used
- Manufacturer: Frech
Used die casting machine DAW 50 with SBC2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with a Rauch MO50E electric furnace and a used Oskar Frech 401 pneumatic sp...
Schorndorf, Germany
1994 FRECH MOS 5/20 U
used
- Manufacturer: Frech
Used furnace for use on DAW5 or DAW20 die casting machines without furnace cabinet
Schorndorf, Germany
2004 Robamat 5201
used
- Manufacturer: Robamat
Used heating device from Robamat for use on die casting machines. This single-circuit device is designed for temperature control of a die casting tool with oil. Dismantled from ongoing production. The device was ...
Schorndorf, Germany
1998 FRECH Weightcontrol 2000
used
- Manufacturer: Frech
Used scales for use on die casting machines up to a unit weight of 2000gr. The device was checked and repaired by the manufacturer. Weighing cell and control board replaced
Schorndorf, Germany
2001 FRECH M200/120
used
- Manufacturer: Frech
Used machine furnace make Meltec type M 200/120 for use on hot chamber die casting machines make Oskar Frech with 200 tons for processing magnesium alloys. Melting capacity per hour 120kg/h 54 kW connected load. ...
Schorndorf, Germany
2024 FRECH W200Zn-ST
used
- Manufacturer: Frech
Equipment of the machine 1.1.1 Motorized safety gate on the right in the casting direction 1.4.0 Machine bearings 1.5.4 Machine interior lighting 1.11.0 Equipment package - energy efficiency 2.0.1 Ejector assista...
Schorndorf, Germany
2003 Frech Espana DAW 125 PD SBC3
used
- Manufacturer: Frech
Used die casting machine DAW 125 with SBC3 control for the use of zinc alloys. Available as a basis for a general overhaul at the manufacturer's plant
Schorndorf, Germany
1995 FRECH DAW 200S
used
- Manufacturer: Frech
Used die casting machine DAW 200 S with Datavario control for the use of zinc alloys. Available by arrangement The manufacturer recommends a general overhaul in the overhaul plant. This can be carried out on requ...
Schorndorf, Germany
1999 FRECH DAM 315 S
used
- Manufacturer: Frech
Used die casting machine DAM 315 S with Datacontrol control for the use of magnesium alloys. Available from used machine stock. The machine is equipped with a Rauch type MMO 315E electric furnace. Without sprayin...
Schorndorf, Germany
Tip: Enter manufacturer, model or keyword