Used Forging

Forging rolls Erfurt RW1 D
- used
- Manufacturer: Erfurt
Type Forging rolls Manufacturer Eumuco Model RW1 D Max. Dia of Workpiece 55 mm Diameter of Rolling Segment 370 mm Usable width of middle roll 500 mm Usable width of outer roll 160 mm Max length of working ...
Germany
Trusted Seller
Hammer Forging Open Die Pneumatic Beche
- used
- Manufacturer: Beche
Capacity : 5 tons Max RAM stroke : 1400 mm, Hitting Energy : 125-142 Kj, Length x Width x Height : 6250 × 1450 × 9130 mm (6190 mm from the ground) Weight : 115.5 tons.
Europe
Trusted Seller
2 tons Hammer Forging Hydraulic Smeral KHZ4
- used
- Manufacturer: Šmeral Brno
- Model: KHZ4
Capacity : 2 tons, Nominal forming energy :50 kJ, The stroke of ram : 500 mm, Stroke per minutes : 18 -145 Ram stroke at impact rated energy : 42, Dies clamping surface : 300 x 570 mm, Smallest total height...
Europe
Trusted Seller
1 ton Hammer Forging Hydraulic Smeral KHZ2
- used
- Manufacturer: Šmeral Brno
Capacity : 1 ton, Nominal energy : 20 kJ, Ram weight (without die holder) : 920 kg, Max ram stroke : 400 mm, Number of stroke per minutes : 60 , Column stroke at nominal energy of the hammer blow :36 mm Die...
Europe
Trusted Seller
0.63 ton Hammer Forging Hydraulic Lasco KH063
- used
- Manufacturer: Lasco
Capacity : 0.63 ton, Ram weight: 630 kg, Max. height of both dies without dovetails : 360 mm, Upper die weight max. : 100 kg, Bear weight : 630 kg, Bear depth : 400 mm, Clear width between the guides : 420 ...
Europe
Trusted Seller
3.15 tons Hammer Forging Hydraulic Lasco KH315
- used
- Manufacturer: Lasco
- Model: KH315
Capacity : 3.15 tons, Energy of blow : 3150 kgm, Falling height : 1100 mm, Weight of falling ram : 2900 kg, Max. weight of die : 530 kg, Way between slides : 700 mm, Motor power : 40 KW, Total height : 682...
Europe
Trusted Seller
2 tons Hammer Forging Hydraulic Smeral KJH4
- used
- Manufacturer: Šmeral Brno
Capacity : 2 tons, Ram weight : 1800 kgs Ram stroke : 500 mm, Number of ram strokes 1/min: 48, Ram impact rated energy : 4000 kgm, Die camping area : 286 x 600 mm, Min. die height : 350 mm, Output of main ...
Europe
Trusted Seller
1 ton Hammer Forging Pneumatic Huta MPM1000A
- used
- Manufacturer: Huta Zygmunt, Polish
Forging Hammer CM1250 made by Progresul Braila - Romania Capacity : 1 ton, Nominal forging energy: 3600 kgm /36 KJ/, Ram stroke : 800 mm, Number of strokes : 110, Dimensions: - Length : 2600 mm, - Width : ...
Europe
Forging Rolling Machine Smeral UL 45 - Retrofit 2019
- used
- Manufacturer: Šmeral Brno
- Model: UL 45
Forging Rolling Machine Smeral UL 45A - Retrofit 2019 Forging roll Smeral UL 45 Diameters of the Rolled Billets 14 — 45 mm Rollers Width 400 mm Number of Rollers Revolutions 15 rpm Rollers Gap Distance 0 — 25 mm ...
Brazil
Trusted Seller
3.5 tons Hammer Forging Pneumatic Huta MPM3000
- used
- Manufacturer: Huta
Capacity : 3.5 tons, Weight of the ram : 3570 kg, Ram stroke : 1000 mm, No. of stroke per min : 90, Shut height till ram : 750 mm, Shut height till table : 1050 mm, Min. height of the models : 350 mm, Max....
Europe
Trusted Seller
1 tons Hammer Forging Pneumatic MPM3150B Huta
- used
- Manufacturer: Huta Zygmunt, Polish
Capacity : 1 ton, Energy of blow : 3600 kg.m, Weight of falling ram : 1250 Kg, Max. Tup stroke : 800 mm, Guideway spacing : 550 mm, Length of die steam in the tup : 500 mm, Length of die steam in the cushio...
Europe
Trusted Seller
2.5 tons Hammer Forging Pneumatic Huta MPM2000A
- used
- Manufacturer: Huta Zygmunt, Polish
Forging Hammer CM2500 made by Progresul Braila - Romania Capacity : 2.5 tons, Weight of the ram : 2480 kg, Ram stroke : 950 mm, No. of stroke per min : 90, Shut height till ram : 650 mm, Shut height till ta...
Europe
Trusted Seller
0.75 tons Hammer Forging Pneumatic Huta MPM1600B
- used
- Manufacturer: Huta Zygmunt, Polish
Capacity : 0.75 tons. Energy of blow : 18.4 KJ, Weight of falling part (without die) : 690 kg, Max weight of upper die : 200 kg, Weight of anvil block without die holder : 12.5 tons, Weight of hammer with an...
Europe
Trusted Seller
2 tons Hammer Forging Open Die Pneumatic Romanian
- used
- Manufacturer: Romanian
Capacity : 2 tons, Ram weight : 2000 kg, Max. ram working : 1200 mm, Height of the working area : 530 mm, Distance between three uprights : 2300 mm, The distance from the level the lower anvil from the groun...
Europe
Trusted Seller
3 tons Hammer Forging Open Die Pneumatic Romanian
- used
- Manufacturer: Romanian
Capacity : 3 tons, Ram weight : 3150 kg, Total height above the foundation : 6185 mm, Height above the ground : 5975 mm, Width of the hammer : 2500 mm, Length of the hammer : 4935 mm, Table of the gabot : 4...
Europe