Used Bending & Forming

DENN CLL-350 BEADING AND TRIMMING MACHINE 13066

• Manufacturer: DENN

MODEL: CLL-350 SERIAL #: 54-LL-04 350 mm /13.77" HEIGHT OF CENTERS OVER BENCH 5.5 KW / 7.3 HP MAIN MOTOR 1500 R.P.M. 150 / 200 / 260 R.P.M. SPINDLE SPEEDS 100 mm / 4.0" WORKING CARRIAGE TRAVEL 200 mm / 8.0" TAI...

BRADBURY RS4-25-5 #0423222

• Manufacturer: Bradbury
• Model: RS4-25-5

-Zee Purlin Tooled, Gear Drive Rollforming Line -All Lower Arbors Power Driven -Upper Arbor Stands 1, 2, 11, 12 Power Driven -50 HP Main Drive Motor -9" H x 2.75" Flange "Zee Purlin" Tooling -6.5" H x 2.50" Flang...

Fenn #30 Hydraulic Tube End Former #0102717

• Manufacturer: Fenn

MACHINE SPECIFICATIONS: Aluminum Low Carbon Steel Stainless Steel Reduce & Expand: 3" x .134" (76.2 mm x 3.40 mm) 2-1/2" x .072" (63.5 mm x 1.82 mm) 2" x .065" (50.8 mm x 1.65 mm) Bead: 3" x .095" (76.2 mm x 2.41...

PINES 1-1/4 #0641823

• Manufacturer: Pines
• Model: 1-14

Round tubing(non ferrous): 2.5" X 109" | Round tubing(mild steel): 2.5" X .065" | Shcedule 80: 1.5" | Maximum bending radius: 12" | Maximum bend angle: 200 DEGREES | Maximum tube length over mandrel: 89" | Bendi...

2003 EATON LEONARD VB-25-ELEC-RH #1264822

• Manufacturer: Eaton Leonard
• Model: VB25

Capacity: 1" OD X 0.095" | Max degree of bend: 180 DEGREES +OR- | Maximum tube length over madrel: 78"

1"x .065" Pines #5T Tube Bender #0105217

• Manufacturer: Pines

SPECIFICATIONS: Material: Round Tubing: Non-Ferrous, 25,000 psi (two): 1" x .072" (25.4 mm x 1.82 mm) Square Tube: Mild Steel (two): 7/8" x .035" (22.2 mm x .889 mm) Round Bar: Mild Steel (two): 5/8" (15.8 mm) Sq...

Betenbender 10-50 Hydraulic Brake

• Manufacturer: Betenbender
• Capacity: 50,000 kilogram
• Stroke length: 203.2 millimeter

50 Ton Betenbender #10-50, 10' OA, 102" BH, 10 Ft. X 14 gauge, #28989 USED 10 FT. X 14 GA. BETENBENDER HYDRAULIC BRAKE Model no. 10'-50 66"/minute press 92"/minute return 2" high die rail Electric foot switch Pus...

HYDRAULIC TUBE & PIPE BENDER W/ TOOLING. #0560625

YODER M2 #0560225

• Manufacturer: Yoder
• Model: M2

ELECTRIC PANEL Number of stands: 18 | Shaft diameter: 2" | Roll space: 12" | Vertical centers: 7" | Line direction: RIGHT–LEFT | Equipped with: MOTOR

B & K B&K ROLLER DIE CO #0900224

• Manufacturer: B & K

: ENTRY FEED UNIT : FOUR-POST CUT-OFF PRESS : PARTS CHUTE : UNCOILER

2001 KEINS KB-45ND #0104623

• Manufacturer: KEINS

2" GREENLEE MODEL 795 HORIZONTAL HYDRAULIC TUBE BENDER. #0742622

• Manufacturer: Greenlee

HYDRAULIC UNIT INCLUDED Stroke of cylinder: 8"

14 STAND GILLFORD -HILL ROLLFORMER BASE WITH CONE DRIVE GEAR BOXES. #0207722

CONE DRIVE GEARBOXES Ratio: 20-1 | H.p. or o.t: 3.47 | Rpm: 1750 | C.l: 1 | Motor: 30 HP

14 STAND X 3-1/2" X 50" BRADBURY SHADOW PANEL RAFTED ROLLFORMING LINE. #0205722

• Manufacturer: Bradbury

TOOLED FOR SHADOW & CENTENNIAL PANEL Number of stands: 14 | Number of rafts: 3 RAFTS OF 4, 1 OF 2 | Arbor diameter: 3-1/2" | Roll space: 50" | Horizontal centers: 20" | Vertical adjustment: 5" - 10" | Equal geari...