Energy » Turbines » New Jersey

Search By Manufacturer

Search By Type

Building Filters

34

Used Turbines in New Jersey, USA

  • Trusted Seller
    113 mw bbc steam turbine

    113 mw bbc steam turbine generator

    • Manufacturer: Brown, Boveri & Cie

    113 MW (113,000 KW) Brown, Boveri & Cie. (BBC) Steam Turbine Generator. Type DK-722-2180. 3 stages: 1st adm. steam pressure 715PSIA @ 780F. 2nd adm. steam pressure 465PSIA @ 690F. 3rd adm. steam pressure 125PSIA ...

    Red Bank, NJ
  • Trusted Seller
    4500 kw elliott steam turbine

    4500 kw elliott steam turbine generator

    • Manufacturer: Elliott

    Unused 4.5 MW Elliot Dual Turbine Steam Generator. Inlet Steam Conditions: 575 PSIG, 745 degrees F, 51,500 lb/hr. Generator made by T D Power Systems Limited. Generator Specs: 4.5MW, 4.16kV, 0.85pf, 60Hz, 1800rpm...

    Red Bank, NJ
  • Trusted Seller
    15800 kw dresser rand steam

    15800 kw dresser rand steam turbine generator

    • Manufacturer: Dresser Rand

    Unused 15MW Steam Turbine Generator. Manufactured by Dresser-Rand. Inlet Pressure 925PSIG@749F. Exhaust Pressure 235PSIG@477F. Trip Speed 3395 RPM. Max Cont RPM 3632. First Crit RPM 2550. Second Crit RPM 4900. Fr...

    Red Bank, NJ
  • Trusted Seller
    15700 kw general electric steam

    15700 kw general electric steam turbine generator

    • Manufacturer: GE

    Unused 15700 kwh steam turbine generator set. Manufactured by GE. The set consists of (1) Dresser-Rand Condensing steam turbine. Model #RD9MQQ, 4500 RPM. 652 abs @ 430F inlet steam. 0.08 abs exhaust steam. 52,661...

    Red Bank, NJ
  • Trusted Seller
    Siemens HG40/25/25 Steam Turbine -

    Siemens HG40/25/25 Steam Turbine - IPP# 94663

    • Manufacturer: Siemens
    • Model: HG40

    back pressure turbine, steam consumption 13.55 lb/BHP/hr, inlet temp normal 940 deg F, inlet temp max 965 deg F, Total flow 148200 lbs/hr.

    Princeton Junction, NJ
  • Trusted Seller
    Carbon Steel GHH GTHR7/130 Gas

    Carbon Steel GHH GTHR7/130 Gas Turbine - IPP# 216227

    • Manufacturer: GHH

    Designed for Nitric Acid Tailgas Used to drive compressor IPP # 216225 & 216226 Flow is 347-642 #/Hr. RPM is 5733 Inlet ; 130 psi at 1150 degrees F, Exhaust psi is 15 psi Maximum continuous speed is 6020. Max. op...

    Princeton Junction, NJ
  • Trusted Seller
    Siemens K-1100-2 Steam Turbine -

    Siemens K-1100-2 Steam Turbine - IPP# 94660

    • Manufacturer: Siemens
    • Model: K1100

    condensing turbine. inlet pressure normal 190 psig steam consumption 9.9 lb/BHP/hr, Total flow 83000 lbs/hr.

    Princeton Junction, NJ
  • Trusted Seller
    Siemens HG40/25/25 Steam Turbine -

    Siemens HG40/25/25 Steam Turbine - IPP# 94665

    • Manufacturer: Siemens
    • Model: HG40

    back pressure turbine. steam consumption 13.55 lb/BHP/hr, Total flow 148200 lbs/hr.

    Princeton Junction, NJ
  • Trusted Seller
    Siemens HG32/20/10 Steam Turbine -

    Siemens HG32/20/10 Steam Turbine - IPP# 94657

    • Manufacturer: Siemens
    • Model: HG32

    back pressure turbine. steam consumption 13.2 lb/BHP/hr, Total flow 106900 lbs/hr.

    Princeton Junction, NJ
  • Trusted Seller
    Siemens HG32/20/10 Steam Turbine -

    Siemens HG32/20/10 Steam Turbine - IPP# 94661

    • Manufacturer: Siemens
    • Model: HG32

    back pressure turbine. steam consumption 13.2 lb/BHP/hr Total flow 106900 lbs/hr.

    Princeton Junction, NJ
  • Trusted Seller
    ELLIOT SJV-3

    ELLIOT SJV-3

    • Manufacturer: ELLIOT

    (2) Used ELLIOT Steam Turbine model SJV-3. 14,300 HP. Stages: 3 RATEAU. Non-Condensing. Inlet PSI 875; Exhaust PSI 365. Inlet: 12" 1500# RTJ-Right. Exhaust: 16" 600# RF-DOWN. NC1 11,600 rpm. MCOS 11,650 rpm. O...

    Oldmans Township, NJ
  • Trusted Seller
    IMO Delaval MJSF

    IMO Delaval MJSF

    • Manufacturer: Delaval

    Used 39 MW (38,952 KW) Imo Delaval Model # MJSF Steam Turbine Generator. Speed 3,600 RPM. Inlet Steam Pressure – 530 psig. Inlet Steam Temperature – 750 F. Throttle Flow – 400 lb/hr. Exhaust Pressure – LB/HR 3” H...

    Red Bank, NJ
  • Trusted Seller
    General Electric Frame 6B

    General Electric Frame 6B

    • Manufacturer: GE
    • Model: 6B

    The plant has GE Frame 6B (type PG6541B) gas turbine with 25,108 operating hours since its last overhaul in 2012. The heat rate of gas turbine is 11,460 KJ/kWh. The gear box has speed ratio of 5,100 : 3,000 rpm. ...

    Red Bank, NJ
  • Trusted Seller
    Solar T4701

    Solar T4701

    • Manufacturer: Solar

    Used 3200 KW Solar Centaur T4701 Wet NoX Gas Turbine Generator Set. Model GC1-CB-ID. Engine Serial #3963C51. Turbine 1500 RPM. Engine Serial #OHD12-C4766. Brushless AC Continuous duty generator. Type SAB. Rated 2...

    Red Bank, NJ
  • Trusted Seller
    MAN Turbo AG MARC-B00

    MAN Turbo AG MARC-B00

    • Manufacturer: MAN

    Used 16MW MAN Back-Pressure Steam Turbine Generator. Model MARC4-B00. Hrs 60145. Input 99bar (1435 psi) at 400 C. output 7bar (101psi) at 165C. Max Speed 8932 rpm. Built 2008. Juemont Electric generator. Model Ji...

    Red Bank, NJ
  • no-image_en.png

    Siemens HG40 Turbine

    • Manufacturer: Siemens
    • Model: HG40

    Good condition Siemens HG40 Turbines. Located in USA and other countries. Click request price for more information.

    USA
123

Overview

Turbines are mechanical devices that convert kinetic and thermal energy into mechanical power. They are commonly used in power generation, aviation, and industrial applications. Turbines come in various types, including steam, gas, wind, and water turbines, each designed for specific applications and energy sources.

FAQ

What factors should I consider when buying a used turbine?

Consider the turbine's age, operating hours, maintenance history, and compatibility with your existing systems. Also, check for any signs of wear or damage.

How can I ensure safe shipping for a turbine?

Use a reputable transport service that specializes in heavy machinery. Secure the turbine properly and ensure it is protected from environmental factors during transit.

What is the maintenance schedule for a turbine?

Regular maintenance includes inspecting blades, bearings, and seals, as well as checking lubrication and cooling systems. Consult the manufacturer's manual for specific maintenance intervals and procedures.