Used Electrical Test Instruments in Dublin, Ireland

emtest VDS200N

• Manufacturer: emtest

Details emtest VDS200N (contact Axiom for availability) The emtest VDS200N Voltage Drop Simulator is used to simulate the various battery supply waveforms recommended by international standards and by car manufac...

Rohde & Schwarz ESVS30

• Manufacturer: Rohde & Schwarz
• Model: ESVS

Details The Rohde & Schwarz ESVS30 EMI Test Receiver operates from 20 MHz to 1 GHz and offers full compliance with CISPR16-1 and VDE0876 standards. It features integrated preselectors, selectable 10 dB preamplifi...

Rohde & Schwarz ESIB7

• Manufacturer: Rohde & Schwarz
• Model: ESIB7

Details The Rohde & Schwarz ESIB7 EMI Test Receiver features a frequency range from 20 Hz to 7 GHz, with exceptional sensitivity (NF typ. 10 dB), low noise (<–3 dBµV), and broad dynamic range. It supports fast sc...

emtest HFK

• Manufacturer: emtest

Details emtest HFK Capacitive Coupling Clamp The emtest HFK is used to couple EFT/burst pulses to I/O lines as required in diffe European and international standards for immunity testing. The coupling of the Elec...

emtest CCI

• Manufacturer: emtest

Details emtest CCI Capacitive Coupling Clamp The emtest CCI is used to couple EFT/burst pulses to I/O lines as required in diffe European and international standards for immunity testing. The coupling of the Elec...

Teseq LE4070

• Manufacturer: Teseq - Schaffner

Details The Teseq LE4070 RF Cable Set For NSG 4070 is designed for seamless compatibility with the NSG 4070 system, delivering reliable RF signal transmission with minimal loss. Built from high-quality materials,...

Schloder SESD200

Details The Schloder SESD200 ESD Simulator delivers precision electrostatic discharge testing with output voltages up to 16.5kV in air and 9kV in contact mode. It offers single pulse or repeated operation, a pre-...

Solar 7399-3

Details The Solar 7399-3 Transient Generator delivers precise surge and transient waveforms for EMC compliance testing. Engineered to evaluate electronic equipment immunity against voltage spikes, it ensures cons...

Teseq (Schaffner) NSG 5500

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG-5500 is a modular pulse generator engineered for advanced automotive EMC testing. It supports a wide range of transient simulations including load dump pulses, with programmable am...

Schaffner NSG 223A

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG 223A module is designed to generate high-energy pulses typical of those caused by switching inductive and capacitive loads or lightning strikes. It delivers pulses up to 2 Joules, availa...

Marconi IFR Aeroflex 2025

• Manufacturer: Aeroflex

Details The Marconi-IFR-Aeroflex 2025 is a dual RF Signal Generator with dual outputs, covering 10 kHz to 2.4 GHz. It delivers excellent spectral purity, high output accuracy, and versatile modulation options, ma...

Haefely PIM120

• Manufacturer: Haefely

Details The Haefely PIM120 is a precision impulse current generator designed for component and material testing. It delivers controlled, high-current pulses that ensure durability verification and compliance with...

Rohde & Schwarz ESW

• Manufacturer: Rohde & Schwarz
• Model: ESW

Details The Rohde & Schwarz ESW provides exceptional signal analysis with frequency coverage from 1 Hz to 44 GHz, supporting compliance with CISPR 16-1-1, ANSI C63.2, MIL‑STD‑461, and FCC standards. It delivers h...

Keysight Technologies 11956A

• Manufacturer: Agilent - Keysight

Details The Keysight (Agilent) 11956A is a high-power antenna capable of handling a maximum continuous power of 1000 Watts. It maintains a VSWR of less than 2:1 and operates with a 50-ohm impedance. This model in...

Keysight Technologies 84105EM

• Manufacturer: Agilent - Keysight

Details The Keysight (Agilent) 84105EM EMC Design Development System integrates the E7401A EMC analyzer and the 11945A close field probe set, offering a comprehensive setup for electromagnetic compatibility testi...