- Trusted Seller
16 GA Lockformer Auto Guide Flanger
- Manufacturer: Lockformer
- Model: 16
Old style. Model 16 (old style) Capacity: 16 ga. max. | Outside flange height approx.: 3/8" | Flanging speed approx.: 18 FPM | Motor: 3/4 HP, 1800 RPM | Overall dimensions approx. (l x w x h): 24" x 24" x 34-1/4"...
Minneapolis, MN - Trusted Seller
20 Ga. Lockformer Rollformer
- Manufacturer: Lockformer
- Model: 20GA
Includes: Left Side: Drive Turner, Right Side: Acme Lock. Includes: Left Side: Drive Turner, Right Side: Acme Lock.
Minneapolis, MN - Trusted Seller
22 Ga. Lockformer Pittsburgh
- Manufacturer: Lockformer
- Model: 22
(Old Style) Includes Old Style Flanging Attachment, ACME Pipelock Aux. Rolls. Model 22, (Old Style) Includes Old Style Flanging Attachment, ACME Pipelock Aux. Rolls.
Minneapolis, MN - Trusted Seller
22 Ga Lockformer Pittsburgh
- Manufacturer: Lockformer
- Model: 22
Old Style. Includes Acme Rolls. Model 22 with Acme Rolls
Minneapolis, MN - Trusted Seller
20 Ga Lockformer Electrofeed Cut To Length Line
- Manufacturer: Lockformer
- Model: 20GA
With Sheet Length Selection, Jog Switch Selection. Machine to include NEW Control System and paint. Rollformers to be sold separately. Sheet Length Selection, Sheet Length Selection
Minneapolis, MN - Trusted Seller
20 GA Lockformer Pittsburgh
- Manufacturer: Lockformer
- Model: 20
Includes Drive Cleat Rolls mounted. Capacity: 20 to 26 ga. | Number of stations: 5 | Speed (approx.): 25 FPM | Overall dimensions, l x w x h (approx.): 36" x 16-1/2" x 36-1/2" | Weight (approx.): 290 lbs. | Motor...
Minneapolis, MN - Trusted Seller
16 Ga. Flagler No. 16 Flagler 16
- Manufacturer: Flagler
Flagler Model 16 (old style) Capacity, max.: 16 ga. | Speed approx. feet per minute: 18 FPM | Flange height: 3/8" | Motor: 3/4 HP | Electrics: 115V/1-Ph/60/1800 RPM | Dimensions (l x w x h): 4" x 24" x 38-/58" | ...
Minneapolis, MN - Trusted Seller
24 Ga Rams Pittsburgh RAMS 24-28
- Manufacturer: Lockformer
Model RAMS 24-28 Capacity: 24 Ga. Max. 28 Ga. Min. Mild Steel | Approx. speed: 35 FPM | Overall dimensions (l x w x h): 36" x 16" x 34" | Weight approx. (lbs.): 125 | Motor: 1/2 H.P. | Electrics: 110V/1-Ph
Minneapolis, MN - Trusted Seller
24 ga. Special Rollformer
Price on Request Special Rollformer. Price on request. Consult with your Gladwin salesman.
Minneapolis, MN - Trusted Seller
24 Ga. Lockformer Snap Lock Button Punch Snap Lock
- Manufacturer: Lockformer
Includes Male & Female Snap Lock Rolls. Model Button Punch Snap Lock, Male & Female Snap Lock Rolls.
Minneapolis, MN - Trusted Seller
Lockformer Electro-Feed Line
- Manufacturer: Lockformer
With Small Parts Feeder, American Steel Line 2500 lb. capacity Powered Decoiler for 20" material. Machine to include NEW Control System and paint. Rollformers to be sold separately. Small Parts Feeder, American S...
Minneapolis, MN 
TK No. 24 Cheek Bender (2 Sided)
Available from a distributor near you. Normally in stock in one of our warehouses. For real production! This beefy little 24 inch, two sided cheek bender is built to last. Bench mounted, this machine comes ready ...
Sutton, MA
8 Station Dual Head Cleat Former for Duct Lines
In brief Ductformer’s Model CR8-CF-DH Dual Head Cleat Former forms the Drive Cleat Flange on both ends of the Duct in a single pass through operation. The System overall can be incorporated into any existing Duct...
Sutton, MA
TK 16 Ga. Pitts. (Choice of Opposing Rolls)
- Manufacturer: Pitts
The 16 gauge Pittsburgh Lock machine has 7 forming stations with 2 forming positions. One position forms the Pittsburgh Lock, while the outboard position has the ability of forming a number of other profiles, to ...
Sutton, MA
Flagler 12 Station Lockformer TDC Machine
- Manufacturer: Flagler
Extended Shafts for Auxiliary Tooling Features: 12 Forming stations with Adjustable Feed table for dual TDC Forming when forming TDC Flange on opposing side of duct work 1-1/2″ Dia.(At Bearing) Hardened and Groun...
Sutton, MA
Tip: Enter manufacturer, model or keyword