Processing » Heat Exchangers » Plate Heat Exchangers » Texas

Building Filters

145

Used Plate Heat Exchangers in Texas, USA

  • EXCHANGERS 67353

    EXCHANGERS 67353

    • Manufacturer: APV BAKER

    0.8 SQ METER 316SS PLATE HEAT EXCHANGER; MFG. BY APV BAKER IN 1996; TYPE 3HH-208/171; UNIT W/CYLINDRICAL SHELL, (23) 316SS PLATES (CYLINDRICAL, VERT) INSIDE SHELL...

    Cleveland, TX
  • EXCHANGERS 114154

    EXCHANGERS 114154

      696 sq. ft. Plate Heat Exchanger, Mfg. by Kelvion in 2022. With 316L Stainless Steel Plates. Rated 145 psig @ 230 deg. F. Model #NF150LBA150, plate type NF150L. 85 plates. 1mm plate thickness. NBR gasket material.

      Cleveland, TX
    • EXCHANGERS 113100

      EXCHANGERS 113100

        "As Is, Where Is" Used Plate and Frame Heat Exchanger.

        Cleveland, TX
      • EXCHANGERS 102477

        EXCHANGERS 102477

        • Manufacturer: VICARB

        ALFA LAVAL PLATE HEAT EXCHANGER MFG. BY VICARB IN 1993; APPROXIMATELY 150 SQ. FT.; PROCESS SIDE RATED 72.6 L; 3 BAR @ 75 DEGREES C.; SERVICE SIDE RATED 72.6L; 3 BAR @ 95 DEGREES C.; 1700MM LENGTH; 550MM WIDTH; 11...

        Cleveland, TX
      • EXCHANGERS 67352

        EXCHANGERS 67352

        • Manufacturer: APV BAKER

        0.8 SQ METER 316SS PLATE HEAT EXCHANGER; MFG. BY APV BAKER IN 1996; TYPE 3HH-208/1; UNIT W/CS CYLINDRICAL SHELL, BOLTED DISHED TOP, WELDED FLAT BTM. WELDED FLAT BTM. (23)316SS CYLIN...

        Cleveland, TX
      • EXCHANGERS 107883

        EXCHANGERS 107883

          APV HEAT EXCHANGER; BUILT IN 1998; TYPE R5MGS16; Qty: 1 | Alloy: S | Sq.ft.: 464.8 | Material (s): CS FRAME | Material (t): 316SS PLATES | Psi (s): 200 | Psi (t): 200 | Temp. deg. f (s): 250 | Temp. deg. f (t): 2...

          Cleveland, TX
        • EXCHANGERS 106891

          EXCHANGERS 106891

          • Manufacturer: TRANTER

          MFG. TRANTER; SUPER CHANGER PLATE HEAT EXCHANGER; APPROXIMATELY 3421.8 SQ. FT. SURFACE AREA; MODEL UX-816-140; APPROXIMATE (139) 40" WIDE X 92" TALL 316 STAINLESS STEEL PLATES; RATED 125 125 PSI AT 38 TO 200 DEGR...

          Cleveland, TX
        • EXCHANGERS 107242

          EXCHANGERS 107242

          • Manufacturer: SUPERCHANGER

          FINISHED PRODUCT HEAT EXCHANGER; MFG. BY SUPERCHANGER IN 1998; MODEL #UX-296-HP-45;;

          Cleveland, TX
        • EXCHANGERS 112942

          EXCHANGERS 112942

            Used 18,294 Sq. Ft. vertical Plate Exchanger. Mfg. by APV in 2012. With (2)20" inlets & (2)20" outlets. Model #S280M14 Paraflow. Previous Service: GI Closed Loop CW heat Exchanger 2;

            Cleveland, TX
          • EXCHANGERS 112941

            EXCHANGERS 112941

              Used 18,294 Sq. Ft. vertical Plate Exchanger. Mfg. by APV in 2012. With (2)20" inlets & (2)20" outlets. Model #S280M14 Paraflow. Previous Service: GI Closed Loop CW heat Exchanger 1;

              Cleveland, TX
            • EXCHANGERS 113207

              EXCHANGERS 113207

                Used 75 Estimated Sq. Ft. 304L Stainless Steel Vertical Plate Heat Exchanger. Mfg. by APV in 2015. With Carbon Steel Frame and 304L Stainless Steel Plates. Model #M-10. Rated mawp FV/150 psi @ 329 deg. F. mdmt -...

                Cleveland, TX
              • EXCHANGERS 113092

                EXCHANGERS 113092

                  "As Is, Where Is" Used Karbate Poly Bloc Heat Exchanger Phenolic Impregnated. Model #PBC24-20PU-1-2. Built in 2016.

                  Cleveland, TX
                • EXCHANGERS 113316

                  EXCHANGERS 113316

                    Used Approximately 400 Sq. Ft. Plate Heat Exchanger. Mfg. by APV in 2009. Model N34 M-11. .5mm Thick Plates.

                    Cleveland, TX
                  • EXCHANGERS 108628

                    EXCHANGERS 108628

                      PREP TANK COOLER; 11.1 SQ. FT. PLATE HEAT EXCHANGER; MFG. BY ALFA LAVAL IN 2011; MODEL #TL3-PFG; NBRP GASKETS; PLATE THICKNESS .50MM;

                      Cleveland, TX
                    • EXCHANGERS 113353

                      EXCHANGERS 113353

                        Used 30 sq. ft. Vertical Plate Exchanger, Mfg by Alfa Laval in 2015. .50 MM Plate Thickness, Model M6-MFG. EPDMP Clip On Plate Exchanger Gaskets. Previous Service: Hexanol Recovery Stripper Feed Heater.

                        Cleveland, TX
                      45678

                      Overview

                      Plate heat exchangers are compact, high-efficiency units built from thin, corrugated metal plates pressed together to form parallel flow channels. They transfer heat between two fluids with tight temperature approaches, commonly used in HVAC, refrigeration, food processing and chemical plants. Available as gasketed, welded or brazed designs, they offer easy capacity changes, high turbulence for efficient transfer, and straightforward disassembly for inspection and cleaning.

                      FAQ

                      What should I check when buying a used plate heat exchanger?

                      Confirm plate material and condition, gasket integrity, design pressure/temperature, heat duty and flow rates, serial documentation, and availability of spare plates or gaskets.

                      How do I ensure safe shipping of a plate heat exchanger?

                      Drain and clean fluids, secure or brace the plate pack, protect flanges and gaskets, crate to prevent movement, label for hazardous residues and insure for transport.

                      What maintenance is required after purchase?

                      Regularly inspect gaskets and plates for leaks or corrosion, monitor pressure drop and temperatures, perform scheduled cleaning (CIP or manual), and replace worn gaskets or damaged plates.

                      How can I verify the exchanger is the right size for my system?

                      Compare required heat duty, inlet/outlet temperatures, flow rates and allowable pressure drop with the exchanger’s rated performance or request a thermal calculation from the seller.