- Trusted Seller
1660 liter heat-/coolable agitator tank, Aisi 316 with anchor agitator
used
- Manufacturer: Bäuchle & Sohn
max. allowable working temperature: 150 °C max. allowable working overpressure (dj): 6.0 bar max. allowable working temperature (dj): 150 °C Temperature control cylinder (dj): double jacket temperature control bo...
- Trusted Seller
630 liter heat-/coolable mixingtank, Aisi316 with propeller agitator
used
- Manufacturer: Ahrens & Bode
max. allowable working temperature: 148 °C max. allowable working overpressure (dj): 3.5 bar max. allowable working temperature (dj): 148 °C Temperature control cylinder (dj): double jacket temperature control bo...
Bremen, Germany - Trusted Seller
Stainless steel container 8 cbm
used
- Manufacturer: Sielmann
Design: cylindrical, standing on 3 feet, screwable, with conical bottoms, inclined blade agitator from above, eccentric, 2.2 kW, 89 rpm, double jacket for pressureless heating/cooling, insulation around cylinder ...
Bremen, Germany - Trusted Seller
25000 Liter heat-/coolable mixingtank, Ais304 with blade stirrer
used
- Manufacturer: Ullmann
max. allowable working overpressure (dj): 3.0 bar Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket
- Trusted Seller
11630 Liter insulated food tank, AIsi316
used
- Manufacturer: Bibby of Halifax
max. allowable working temperature: 100 °C Volume: 11.630 liter | Bottom: torispherical bottom | Stand type: legs | Quantity legs: 4 Piece | Insulation: available | Insulating jacket: hermetically welded | Materi...
- Trusted Seller
34500 liter standing storage tank, Aisi304
used
- Manufacturer: Rieger
remarks: The pictures show a slightly smaller but otherwise identical tank from the same project.
- Trusted Seller
Stainless steel container 100 cbm
used
- Manufacturer: Sielmann
Design: cylindrical, standing on a flat base, inside with a lower conical base and an upper conical base. Propeller agitator installed diagonally in the cylinder below. 5.0 kW, 960 rpm. Insulation around the cyli...
Bremen, Germany - Trusted Seller
Stainless steel tank 98.5 cbm
used
- Manufacturer: Sielmann
Design: cylindrical, standing on frame, with opening DN 500 with conical bottoms. Propeller agitator in the cylinder, installed diagonally below. 1.2/2.2 kW, 53/109 rpm. Insulation around cylinder and upper botto...
Bremen, Germany - Trusted Seller
Agitator tank 22 cbm
used
- Manufacturer: Sielmann
Design: cylindrical, standing on 4 feet, height-adjustable, with bracing, with conical bottoms, propeller agitator from above, eccentric, 3.7 kW, 470 rpm, insulation around the cylinder and lower base, fully weld...
Bremen, Germany - Trusted Seller
Agitator tank 18 cbm
used
- Manufacturer: Sielmann
Design: cylindrical, standing on 5 feet, height-adjustable, open at the top, with 200 mm reinforcement rim, with lower conical base, with cross member for inclined blade agitator, eccentric from above, approx. 2....
Bremen, Germany - Trusted Seller
Stainless steel container 18 cbm
used
- Manufacturer: Sielmann
Design: cylindrical, standing on 5 feet, with conical bottoms, inclined blade agitator from above, eccentric, 3/5 kW, 22/44 rpm. Connections: 1 manhole Ø 450 in the upper base, 2 spray heads, 1 sight glass DN 125...
Bremen, Germany - Trusted Seller
Agitator tank 15.5 cbm
used
- Manufacturer: Sielmann
Operating data: Working pressure 1 bar, as per nameplate Design: Cylindrical, standing on a Femit frame, dished ends, reinforced upper end, disc agitator mounted from above, unused motor, 18.5 kW, approx. 30 rpm,...
Bremen, Germany - Trusted Seller
Agitator tank 13 cbm
used
- Manufacturer: Sielmann
Design: cylindrical, standing on 4 feet, with curved bottoms, inclined blade agitator from the top center, 4 kW, approx. 40 rpm, with bottom bearing, internal pipe coil on the cylinder and lower bottom, operating...
Bremen, Germany - Trusted Seller
Agitator tank 12.5 cbm, with heating coil
used
- Manufacturer: Sielmann
Design: cylindrical, standing on 4 pipe feet with basket-shaped bases. Inclined blade agitator from the top centered, 3.0 kW, 88 rpm. External half-pipe coil around the cylinder, 10 turns, designed for an operati...
Bremen, Germany - Trusted Seller
Stainless steel tank 11.7 cbm, half pipe coil
used
- Manufacturer: Sielmann
Design: cylindrical, standing on 4 feet, open at the top, with reinforcement edge, an overflow funnel 450 x 470 mm at the top of the cylinder, with a conical bottom, half-pipe coil around the cylinder, 4 turns, d...
Bremen, Germany
Tip: Enter manufacturer, model or keyword