Building Filters
- Trusted Seller
Shimada 2-Spindle CNC Lathes
- Manufacturer: Shimada-Kitako
The Shimada 2SI-6 / 2SI-8 / 2SI-10 2-Spindle 1NC Lathe was developed from the architecture of “reducing idle time to the utmost limit." - Collet chuck, 6", 8", 10", 12" chucks - Loading with one spindle while pro...
Japan 
NC Lathe
- Manufacturer: Tsugami
- Model: S206
grasping rod diameter : Φ3-Φ20mm maximum working length : 210 mm spindle maximum bore diameter : Φ10 spindle speed : 200 - 10000 min Total Tools : 28 pcs control axis number : 6 axis
Osaka, Japan
2012 Mori Seiki NZX1500/800STY2
- Manufacturer: Mori Seiki
- Model: NZX-1500/800
FANUC31iA 6-inch 3-jaw chuck for both main and sub (Kitagawa/BB206) 16-corner turret (top 2 pcs (left: combined), bottom 1 pc (combined)) Right-feed chip conveyor 51Φ through diameter for both main and sub If the...
Tatebayashi, Japan
2003 Okuma Toyokazu HJ-18
- Manufacturer: Okuma
- Model: HJ-18
If there is a difference between the content and the actual item, the actual item will be given priority.
Tatebayashi, Japan
2012 Takamatsu Machine Industry GSL-15
- Manufacturer: Takamatsu Machinery Industry
FANUC0i-TD 8-inch 3-jaw chuck (Kitagawa/N-08) 8-square turret, rear-end chip conveyor If there is any discrepancy between the contents and the actual product, the actual product will take priority.
Tatebayashi, Japan
2018 Okuma MULTUS B750
- Manufacturer: Okuma
- Model: Multus B750
OSP-P300SA-H 18-inch chuck HSK-A100 ATC40 pcs. Product name: Combined NC Lathe | Warehouse: Site
Tatebayashi, Japan
2001 Dainichi Metal Industry DL530×150
- Manufacturer: Dainichi
- Model: DL530150
FANUC20i-T 10" 3-jaw scroll chuck 1500 between centers Stroke X342 Z1558 Swing 530 on bed If there is any discrepancy between the contents and the actual product, the actual product will take priority.
Tatebayashi, Japan- Trusted Seller
Shimada-Kitako 4-Spindle Horizontal CNC Lathe
- Manufacturer: Shimada-Kitako
- Model: HS4200N
HS4200n Ultra High-Speed Production CNC Lathe with High-Speed Automatic Part Loading System - The newest version of the uniquely designed 4-spindle lathe. - By increasing the rapid feed rate on each axis, spindle...
Japan 
1995 Takizawa TAC-460
- Manufacturer: Takizawa
FANUC20-T 10-inch 3-jaw scroll chuck Spindle through-hole diameter 77, center-to-center 800, swing 460 on bed If there is any discrepancy between the contents and the actual product, the actual product will take ...
Tatebayashi, Japan
2002 OM OMEGA70
- Manufacturer: OM
FANUC-18iT Table size φ1450 (1 side) Table size φ1250 (5 sides) 6 pare ATC 40 pare with swing 1600 chipcon If there is any discrepancy between the contents and the actual item, the actual item will take priority.
Tatebayashi, Japan
2014 Amada C3D
- Manufacturer: Amada
If there is a difference between the content and the actual item, the actual item will be given priority.
Tatebayashi, Japan
2003 Okuma LCS-15
- Manufacturer: Okuma
- Model: LCS-15
OSP-E10L 8-inch 3-jaw hollow chuck (Kitagawa/B-208) 8 square turret with center Post-loading chip conveyor If there is any discrepancy between the content and the actual product, the actual product will take prio...
Tatebayashi, Japan
2008 Mori Seiki NL2500Y/700
- Manufacturer: 森精機
- Model: NL-2500Y/700
MSX-850Ⅲ 10-inch 3-jaw chuck, 12-sided turret, with center, with right-hand tip contact, rotation speed 4000 rpm, center distance 700. If there is a discrepancy between the contents and the actual product, the ac...
2005 Mori Seiki NL2500MC/700
- Manufacturer: 森精機
- Model: NL-2500MC/700
- Spindle bore: 102 mm
MSX-850(MELDAS) 10-inch 4-jaw chuck (Kitagawa/HW-10)* Double cylinder mechanism 12-corner turret with center Tool presetter with right exit tip-con with dialogue (MAPPSⅡ) If there is any difference between the co...
1995 Okuma LCS-25
- Manufacturer: Okuma
- Model: LCS-25
OSP700L 10-inch 3-jaw chuck (Toyowa/H037M10) 8-sided turret Right-hand chip conveyor Easy dialogue included If there is a discrepancy between the contents and the actual product, the actual product will take prec...
Tatebayashi, Japan
Mori Seiki SL-35B CNC Lathe
- Manufacturer: Mori Seiki
- Model: SL-35B
Good condition Mori Seiki SL-35B CNC Lathes manufactured in 1991. Located in USA and other countries. Click request price for more information.
USA