- Trusted Seller
TOS SKQ 12 - C axis - live tools
- Manufacturer: TOS
- Model: SKQ
Plateau diameter: 1250 mm | Max turning diam: 1500 mm | Max load capacity: 6000 kg | Max turning height: 1015 mm | Ram travel: 1000 mm | Ram section: 180 x 200 mm | Carriage travel from center to right/left: 840...
Tortona, Italy - Trusted Seller
TOS – MAS VO 50
- Manufacturer: TOS
- Model: VO 50
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Bore capacity in steel (diameter): 60mm | Center of spindle to wall or column: min./max. 320 - 160mm | Spind...
Günzburg, Germany - Trusted Seller
Prague, Czech Republic - Trusted Seller
TOS WHQ 13.4
- Manufacturer: TOS
- Spindle bore: 130 millimeter
Spindle diam: 130 mm | X axis travel: 2000 MM | Z axis travel: 800 MM ( SPINDLE ) | Y axis travel: 2000 MM | W axis travel: 1250 MM ( COLUMN ) | Table dimensions: 1600 x 1800 mm | Max load capacity: 12 TON | Tab...
Tortona, Italy - Trusted Seller
Metalworking machine TOS SU 50 A 1500 - Lead and feed screw lathes
- Manufacturer: TOS
- Model: SU 50/1500
- Spindle bore: 56 millimeter
Additional Features Used L + Z Lathe Accessories Electrical equipment, 3-axis ACU RITE digital readout, rapid traverse, MULTIFIX quick-change tool post with 3 inserts, longitudinal and cross stops, chip tray
Wiesbaden, Germany - Trusted Seller
TOS W9A
- Manufacturer: TOS
- Model: W 9A
TOS Varnsdorf W9A boring machine, also known as a drilling-milling machine, is one of the most versatile machine tools. Boring machines can be used for drilling, boring, and tapping holes, turning and tapping ext...
Poland - Trusted Seller
1991 TOS FGS 32/40
- Manufacturer: TOS
- Model: FGS 32/40
Milling machine TOS KURIM FGS 32/40 This is a machine tool in which the main rotary motion is performed by a tool—a milling cutter—mounted in the spindle, while the feed motion is most often performed by a workpi...
Bytom, Poland - Trusted Seller
2007 TOS FGS 63T PLUS
- Manufacturer: TOS
- Model: FGS 63
Milling machines are machine tools in which the main rotary movement is performed by a tool - cutter mounted in the spindle, and the feed movements are most often performed by a workpiece mounted on a sliding tab...
Tarnowskie Góry, Poland - Trusted Seller
TOS HP 100
- Manufacturer: TOS
Z axis travel: 900 mm | Y axis travel: 2000 mm | Table dimensions: 2200 x 2200 mm - 360? | Table travel: 1500 mm | Spindle nose taper: iso 50 | Spindle speed: 7,1-1120 rpm | Other details: D.R.O 2 axis
Tortona, Italy - Trusted Seller
TOS WHN 13.8
- Manufacturer: TOS
- Model: WHN 13
- Spindle bore: 130 millimeter
Spindle diam: 130 mm | X axis travel: 3500 mm | Z axis travel: 800 mm | Y axis travel: 2000 mm | W axis travel: 1250 mm ( column ) | Table dimensions: 1600 x 1800 mm | Max load capacity: 12 ton | Table division:...
Tortona, Italy 
Tos SUI 80x4000 RP
- Manufacturer: TOS
- Model: SUI
Turning diameter over bed: 800mm | Lathe diameter over cross slide: 520mm | Spindle drilling: 71mm | Spindle speed: 4.5-1800rpm | Spindle nose: CSN 201011 B8 | Weight between studs: 1600kg | The wife in the stud...
Värnamo, Sweden
Tos SUI 80x4000 RP 010801
- Manufacturer: TOS
- Model: SUI
Fixed & following steadyrest 2-axl. DRO. Stepless spindlespeed
Värnamo, Sweden- Trusted Seller
Surface Grinder TOS BPV40/2000
- Manufacturer: TOS
Table: 400 x 2000 mm | Grinding height: 800 mm | Grinding wheel dia.: 500 mm | Spindle rev.950: rev/min | Max. table load/1m: 1050 | Machine dimension: 2800 x 7350 mm | Machine weight: 13000 kg
Prague, Czech Republic - Trusted Seller
TOS TOS SKIQ 12 - TURNING DIAM 1700
- Manufacturer: TOS
Hydraulic chuck diam: 1250 MM - 3 JAWS | Max turning diam: 1700 MM | Max load capacity: 12 TON | Max turning height: 1265 MM | Nr of ram: 01 | Ram travel: 1000 MM | Ram section: 180 X 200 MM | Carriage travel fr...
Tortona, Italy - Trusted Seller
TOS TRENS SN 32 Lathe
- Manufacturer: TOS
- Model: SN 32
swing over bes / slide 330 / 168 mm in gap 520 mm dbc 1000 mm bore 52 mm speed 14 - 2500 1/min
Chemnitz, Germany 
TOS FU 2A Milling Machine
- Manufacturer: TOS
- Model: FU 2A
Good condition TOS FU 2A Milling Machines available between 1960 and 1975 years. Located in Czech Republic and other countries. Click request price for more information.
Czech Republic
Tip: Enter manufacturer, model or keyword