Used Lathes in Switzerland

TORNOS M 7

• Manufacturer: Tornos
• Model: M7
• Spindle bore: 8 millimeter

Diameter of work admitted: 7 mm | With flat cames: 60 mm | Spindle hole: 8 mm | Max. treading diameter: 6 M | Number of tool cutters: 5 | Number of spindle speeds: 20 | From: 1400 t/min | Up to: 10000 t/min | Vo...

TORNOS T 4

• Manufacturer: Tornos
• Spindle bore: 6 millimeter

Diameter of work admitted: 4 mm | With flat cames: 28 mm | Spindle hole: 6 mm | Max. treading diameter: 4 M | Number of tool cutters: 5 | Number of spindle speeds: 14 | From: 2000 t/min | Up to: 12000 t/min | Vo...

6-JAWS CHUCK “MAPROX” Ø 70 – FITTING W-12

for external gripping

HEADSTOCK “SCHAUBLIN” TYPE 102-Mi W25, with integrated

• Manufacturer: Schaublin

motor, for collets W25, with drawbar W25 and Weight: 52 kg

TORNOS M 7

• Manufacturer: Tornos
• Model: M7
• Spindle bore: 8 millimeter

Diameter of work admitted: 7 mm | With flat cames: 60 mm | Spindle hole: 8 mm | Max. treading diameter: 6 M | Number of tool cutters: 5 | Number of spindle speeds: 20 | From: 1400 t/min | Up to: 10000 t/min | Vo...

TECHNIKUM BIEL 102

• Manufacturer: TECHNIKUM BIEL

Centre height: 102 mm | Distance between centres: 370 mm | Inner taper type: 20 W | From: 50 t/min | Up to: 1200 t/min | Voltage 50 hz 3x: 380 Volt | Machine's weight about: 450 kg | Length: 1200 mm | Width: 700...

HABEGGER NEOTOR

• Manufacturer: HABEGGER
• Spindle bore: 20 millimeter

Centre height: 102 mm | Distance between centres: 450 mm | Swing over cross-slide: 120 mm | Swing over bed: 200 mm | Spindle hole: 20.0 mm | Inner taper type: 20 W | Taper in tailstock: 2 CM | Voltage 50 hz 3x: ...

TORNOS M 4

• Manufacturer: Tornos
• Spindle bore: 6 millimeter

Diameter of work admitted: 4 mm | With flat cames: 28 mm | Spindle hole: 6 mm | Max. treading diameter: 4 M | Number of tool cutters: 5 | Number of spindle speeds: 14 | From: 2000 t/min | Up to: 12000 t/min | Vo...

TORNOS R 10

• Manufacturer: Tornos
• Model: R10
• Spindle bore: 13 millimeter

Diameter of work admitted: 10 mm | With flat cames: 70 mm | With bell cames: 100 mm | Spindle hole: 13 mm | Max. treading diameter: 8 M | Number of tool cutters: 5 | Number of spindle speeds: 20 | From: 1050 t/m...

TORNOS M 4

• Manufacturer: Tornos
• Spindle bore: 6 millimeter

Diameter of work admitted: 4 mm | With flat cames: 28 mm | Spindle hole: 6 mm | Max. treading diameter: 4 M | Number of tool cutters: 5 | Number of spindle speeds: 14 | From: 2000 t/min | Up to: 12000 t/min | Vo...

2010 TSUGAMI BW 20 E

• Manufacturer: Tsugami

Number of axis total: 9 | Number of spindles: 2 | Max. turning diameter: 20 mm | Number of tools: 20 | From: 200 t/min | Up to: 10000 t/min | Spindle power: 1.1 / 3.7 kW | Rapid traverse: 24 m/min | Voltage 50 h...

2011 FMB TNL 18P

• Manufacturer: FMB

Control: TRAUB SYSTEM TX 8i-p | Number of spindles: 2 | Turning length: 180 mm | Max. bar diameter: 20 mm | Collet device: F25 | Up to: 6400 t/min | Longitudinal travel (z-axis): 205 mm | C axis (spindle,resolut...

2007 LNS BS32CE(S)-V

• Manufacturer: LNS

Control: TSUGAMI-MORI MSC-501 (FANUC) | Number of axis total: 7 | Number of spindles: 2 | Max. turning diameter: 8 - 32 mm | Maximum turning length: 250 mm | Max. drilling diameter: 12 mm | Max. threading diamet...

2007 LNS SR-10 J type C

• Manufacturer: LNS

Control: FANUC Serie 18i-TB | Number of axis total: 7 | Number of spindles: 2 | Machining diameter max.: 10 mm | Maximum turning length: 135 mm | From: 1 t/min | Up to: 10000 t/min | Spindle power: 3.7 kW | C ax...

2007 LNS SA-16 RC

• Manufacturer: LNS

Control: FANUC Serie 18i-T | Number of spindles: 2 | Max. turning diameter: 16 mm | Max. drilling diameter: 4 mm | Max. threading diameter: 6 M | From: 500 t/min | Up to: 9000 t/min | Spindle power: 2.2 kW | Thr...