Used packaging

2019 TORNOS GT-26 III

• Manufacturer: Tornos
• Model: GT26

Tornos GT 26 III New in 2019 Low hours - Tooling Included Up to 40 tools, including 14 rotating tools The Swiss GT 26, like the Swiss GT 13, is equipped with three motors (two on the platten and one for back ope...

Machined 932 Bronze; Lathe Stock; 26 1/2" X 12"

“Used” Machined 932 Bronze; Lathe Stock; 26 1/2" X 12" Machined 932 Bronze; Lathe Stock; 26 1/2" X 12" THIS ITEM IS CLEAN MACHINED 932 BRONZE. 760 POUNDS. 26 1/2 INCH LONG BY 12 INCH ROUND. CENTER DIAMETER IS ...

2010 TORNOS DECO 10e

• Manufacturer: Tornos
• Model: Deco 10

This Tornos DECO 10e was manufactured in 2010. A Swiss type turning machine featuring a movable headstock, directional spindle stop, and independent counter spindle. It includes a loading magazine with drum and a...

2010 TORNOS DECO 10a

• Manufacturer: Tornos
• Model: Deco 10A

This TORNOS DECO 10a was manufactured in 2010. It features a movable headstock, directional spindle stop, and cross slides with tool holders. It includes an independent counter spindle, a pivoting workpiece holde...

2000 TORNOS DECO 2000

• Manufacturer: Tornos
• Model: Deco 2000

This TORNOS DECO 2000 swiss type turning machine was manufactured in 2000. It features a movable headstock, directional spindle stop, and cross slides with tool holders. Includes an independent counter spindle, l...

2005 TORNOS DECO 10

• Manufacturer: Tornos
• Model: Deco 10

This Tornos Deco 10 was manufactured in 2005. A swiss type turning machine featuring a drum with loading magazine, a filter with a 25-liter capacity, and an integrated hydraulic unit. It supports various bar diam...

Multi-spindle lathe TORNOS SAS 16 DC

• Manufacturer: Tornos
• Model: SAS16DC

Multi-spindle automatic lathe Bar diameter: Maximum feed length: 63 mm Maximum length of turned part: 52 mm Number of spindle speeds: 16 Spindle speed (settable by PLC): 1200-8000 rpm Maximum radial slide travel:...

TORNOS AS 14-6 multi-spindle lathe

• Manufacturer: Tornos
• Model: AS14

Multi-spindle automatic lathe No. 6 spindles Max bar passage: Max feed length: 75 mm. Spindle: Production cycle range: pieces per minute: 4.9 to 72 - seconds per piece: 12.2 to 0.84. No. 6 transverse units Fixed ...

TORNOS AS 14-6 multi-spindle lathe

• Manufacturer: Tornos
• Model: AS14

No. 6 spindles. Max bar passage: Round: 14 mm - Square: 10 mm - Hexagonal: 12 mm Max feed length: 75 mm. Spindle: Number of speeds: 16 - Spindle revolutions: 900-6000 rpm. - Production cycles: no. 22 Production c...

LINDERMAIER lathe type TORNOS 125

• Manufacturer: Tornos

Cam-type sliding headstock lathe Type Tornos 12.5 Lindermaier + transfer various units. No. 4 vertical units: drilling/threading. No. 5 horizontal units: Bar passage: 12.2 mm. Rotary table: 10 positions. Clamps w...

2001 TORNOS MULTIDECO 20-6 Lathe

• Manufacturer: Tornos
• Model: Multideco 20

Multi-spindle automatic lathe No. 6 spindles. Bar passage: 5-20 mm (max 24) Workpiece length: 100 mm. Spindle motor power: 11 kw. Spindle speed: 50-6000 rpm. N. 18 NC-controlled axes No. 5 cross slides (X,Z). No....

2001 TORNOS MULTIDECO 20-6 Lathe

• Manufacturer: Tornos
• Model: Multideco 20

Multi-spindle automatic lathe No. 6 spindles. Bar passage diameter: 5 - 20 mm (Max 24) Workpiece length: 100 mm. Spindle motor power: 11 kw. Spindle speed: 50-6000 rpm. N. 18 NC controlled axes N. 5 cross slides ...

TORNOS AS 14-6 multi-spindle lathe

• Manufacturer: Tornos
• Model: AS14

No. 6 spindles. Max bar passage: Max feed length: 75 mm. umber of speeds: 16 - RPM: 900-6000 rpm - Production cycles: 22 Production cycle range: pieces per minute 4.9 to 72 - seconds per piece 12.2 to 0.84. No. 6...

TORNOS AS 14-6 multi-spindle lathe

• Manufacturer: Tornos
• Model: AS14

6 spindles. Max bar passage: Max feed length: 75 mm. Spindle: No. 22 production cycles. . Range of production cycles: (parts per minute) 4.9 to 72 - (seconds per part) 12.2 to 0.84 Fixed cam ratio with cross slid...

1998 TORNOS DECO 20/A cnc lathe

• Manufacturer: Tornos
• Model: Deco 20A

10-axis single-spindle automatic sliding headstock lathe. No. 3-4 simultaneous contact tools. Axis travels: Max bar capacity: Spindle collet: F25 nr. 76-64, F20 nr. 76-201 option. Clamping force: 1200 daN. Coolan...