Used Engine Lathes in Vermont, USA

1965/84 Binns & Berry Sliding Gap Bed Lathe

• Manufacturer: Binns & Berry

Manual Engine Lathe -Equipped With- 4-Way Tool Post Operators Stand Steady Rest Rear Mounted Tracer & Template Bar Manual X-Y Axis Tool Block for Compound Boring Bar H...

Leblond 26 REGAL

• Manufacturer: Leblond
• Spindle bore: 55.63 mm

Manual Engine Lathe -EQUIPPED WITH- (1) 15" 6-Jaw Chuck (1) 24" 4-Jaw Chuck (1) 12.5" Face Plate Aloris Tool Post Accurite 200T 2 Axis DRO Tool Offsets Feature (1) Steady REst Extra Available Tool Holders All Ava...

1961 Monarch 18 X 30

• Manufacturer: Monarch
• Spindle bore: 38.1 mm

Engine Lathe Swing over ways: 18.5" | Swing over cross slide: 11" | Distance between centers: 30" | Spindle hole: 1.5" | Spindle speeds: 24 - 1,028 RPM | Threading range: 2 - 120 TPI

Axelson 25 x 144

Engine Lathe SOLD-----------------SOLD-----------------------SOLD

1950 VDF Wolenberg 42X216

• Manufacturer: VDF - Boehringer

Engine Lathe -EQUIPPED WITH- Inch/Metric Threading Cuts Threads in Metric, English, American & Acme Taper Attachment Conversion Gears Books & Manuals(In English)

2005 Birmingham DLC-16120

• Manufacturer: Birmingham

Manual Engine Lathe Swing over bed: 16" | Swing over cross slide: 9" | Swing over gap: 27 1/2" | Length of gap: 10" | Distance between centers: 120" | Spindle bore: 4 1/8" | Spindle nose type: D1-8 | Spindle tape...

Wickes Bros 85X264

Manual Engine Lathe Swing over ways: 85" | Swing over cross slide/carriage: 60" | Distance between centers: 264" | Spindle speeds: 1 - 140 rpm | Main motor: 60 DC hp | Chuck diameter: 72"

1951 Axelson 32-120

Manual Engine Lathe -EQUIPPED WITH- Raised Head & Tailstock 30" Chuck

Niles 72X300

• Manufacturer: Niles

Manual Engine Lathe -EQUIPPED WITH- Long Boring Attachment & Boring Head Guide on Saddle

1997 Clausing Metosa C32120

• Manufacturer: Clausing/Colchester
• Model: C32120
• Spindle bore: 101.6 mm

Manual Engine Lathe -EQUIPPED WITH- Metric & Inch Threading 24" 4-Jaw Chuck Steady Rest Tailstock

American Pacemaker 32X108

• Spindle bore: 76.2 mm

Manual Engine Lathe -EQUIPPED WITH- 20" 4-Jaw Chuck 22" Steady Rest Taper Attachment

1987 Summit 26X180

• Manufacturer: Summit

Manual Engine Lathe -EQUIPPED WITH- Inch/Metric Threading Taper Attachment 20" 4-Jaw Chuck (1) Steady Rest

Cincinnati 48X240

• Manufacturer: Cincinnati

Manual Engine Lathe -EQUIPPED WITH- Taper Attachment Threading 24” & 21” Steady Rests 20” & 6” Live Centers Misc. Tooling

1990 Tos SN 71 C

• Manufacturer: TOS
• Spindle bore: 78.74 mm

Manual Engine Lathe -EQUIPPED WITH- Removable gap 3 jaw chuck 4 jaw chuck Tool post Steady rest Follow rest Coolant

Standard-Modern 1660

• Spindle bore: 50.8 mm

Manual Engine Lathe -EQUIPPED WITH- 8 Position Tool Turret Taper Attachement Inch & Metric Threading Tailstock 12" 3-Jaw Chuck Cross Feeds Hardened And Ground Ways