Used fish processing

Trusted Seller
HERMASA TUNIPACK 300
- used
- Manufacturer: HERMASA
Packing of tuna with a speed of 300 packs / minute. -Made of stainless steel AISI-304 and AISI-316. -Control of packing weight from touch control screen installed on the machine without reformatting. -Supports ca...
Murcia, Spain
Trusted Seller
HERMASA TUNIPACK-500
- used
- Manufacturer: HERMASA
High production machine speed of 500 cans / minute. -Made of stainless steel AISI-304 and AISI-316. -Touch screen control for changing operating parameters (speed, weight, packaging, etc ....). -Packing Weight ch...
Murcia, Spain
Trusted Seller
S/S MACONSA LINEAR BRUSH WASHING MACHINE
- used
- Manufacturer: MACONSA
DESIGNED TO BRUSH THE MUSSEL SHELL TO REMOVE ALL TYPES OF MARINE DEBRIS OR FOULING.
Murcia, Spain
Trusted Seller
HERMANOS ALFARO P.H.A HIDRA
- used
- Manufacturer: HERMANOS ALFARO
Height: 0.35 m | Included: 0.50 m | Useful width: 0.00 m | Length: 0.60 m | Weight: 0 Kg | Made of: STAINLESS STEEL | Aisi: 316 | Rpm: 100 | Motor: HYDRAULIC | H.a. hidra peeling machine: Hydraulic motorised mac...
Murcia, Spain
Trusted Seller
LEIJON TUNA SKINNER
- used
- Manufacturer: LEIJON
Height: 2.10 m | Included: TOUCH SCREEN | Useful width: 0.27 m | Length: 7.57 m | Weight: 1800 Kg | Made of: STAINLESS STEEL | Control pannel: INCLUDED
Murcia, Spain
Trusted Seller
FMC 166
- used
- Manufacturer: FMC
Height: 2.20 m | Included: 2.00 m | Useful width: 0.00 m | Length: 3.80 m | Weight: 0 Kg | Production: 100 CONTAINERS/MIN | Volt: 380 V | Power: 4 KW, 5.4 CV | Current format (mm): 99 | Frequency: 50 HZ
Murcia, Spain
Trusted Seller
STRIP CUTTER FOR PEPPER, SPINACH, CEPHALOPODS
- used
Industrial slicers allow different types of food to be cut with impressive precision and speed, which in turn reduces preparation time and increases productivity. Equipment designed for cutting cephalopods (squid...
Murcia, Spain
Trusted Seller
S/S WASHING MACHINE FOR REMOVING SOIL FROM COCKLES
- used
- The production is of entrance. - Inner spindle pitch: 330 MM - It has 4 intermediate pitches + the final output pitch.
Murcia, Spain
Trusted Seller
ANCHOVY SCALDING LINE (WITH 3 POOLS)
- used
Height: 2.00 m | Included: 3 POOLS | Useful width: 0.00 m | Length: 5.50 m | Weight: 0 Kg | Made of: STAINLESS STEEL | Recirculation pump: 3 UNITS
Murcia, Spain
Trusted Seller
GRUPO HRG BT 2203
- used
- Manufacturer: Grupo HRG
In the vacuum conveying system, the treatment tanks are emptied through as many vacuum tanks as there are discharge points. These vacuum tanks are filled with product (e.g. cephalopods) by the vacuum created by t...
Murcia, Spain
Trusted Seller
GRUPO HRG CP 3300
- used
- Manufacturer: Grupo HRG
The slicing machine is a machine designed for slicing the tentacles of cephalopods. The machine is equipped with: - An upper conveyor belt of slats, on which the product to be sliced is transported. - It has a se...
Murcia, Spain
Trusted Seller
GRUPO HRG BP 2000
- used
- Manufacturer: Grupo HRG
The blender for cephalopods, especially octopus, is designed to clean and blend the product by beating the mass of product immersed in a liquid of water and salt or any other additive. The product is introduced i...
Murcia, Spain
Trusted Seller
GRUPO HRG, CEPHALOPODS WASHER
- used
- Manufacturer: Grupo HRG
The washing machine / mixer for cephalopods, especially octopus, is a machine made of stainless steel for washing and mixing octopus. It basically consists of a cylindrical drum made of stainless steel plate, wit...
Murcia, Spain
Trusted Seller
S/S BADER EVISCERATING AND FILLETING MACHINE WITH VACUUM TANK
- used
- Manufacturer: BADER
*MEASUREMENTS OF THE FILLETING MACHINE: LENGTH: 2.40m WIDTH: 0.70m HEIGHT: 1.20m *VACUUM TANK MEASUREMENTS: HEIGHT: 3.20m USEFUL HEIGHT: 1.8 m DIAMETER: 0.85m
Murcia, Spain
Trusted Seller
S/S DAPONTE SARDINELLA HEADING ANG GUTTING MACHINE
- used
- Manufacturer: DAPONTE
Machine designed to carry out the heading and gutting of sardinellas. Equipped with: Tank (integrated in the machine) Mould dimensions: Mould length: 13 cm Head length: 3 cm Width: 2 cm
Murcia, Spain
Marel B35 Fish Processing
- used
- Manufacturer: Marel
- Model: B35
Good condition Marel B35 Fish Processing available between 2003 and 2005 years. Located in Poland and other countries. Click request price for more information.
Poland