- Trusted Seller
1991 ROVETTA S2 400-1600-1200 matricola 2537/1 PR33
- Manufacturer: Rovetta
- Model: S2-400
Typology: TWO-POST MECHANICAL ECCENTRIC PRESS | Nominal power at 12,5 mm from p.m.i.: 400 t | Lower mould tray dimension: 1600 x 1200 mm | Deck size for sledgehammer moulds: 1600 x 1200 mm | Maximum shoulder cle...
Nichelino, Italy - Trusted Seller
TRANSFER HEADER COLD FORMING SACMA SP150 Operational
- Manufacturer: Sacma
SACMA SP150 Good condition Operational - fully functional - actually working Progressive cold forming machine - 4 DIE Year: 1981 - rebuilt in year 2016 Available for any test Supplied with: - controll proce...
Calolziocorte, Italy 
MANZONI 1000 TON - HOT FORGING PRESS 1000 TON
- Manufacturer: Manzoni
- Model: SR1000
MANZONI 1000 TON - HOT FORGING PRESS 1000 TON
Arezzo, Italy- Trusted Seller
THREADIN MACHINE E.W. MENN GW32 REFURBISHED acc. CE Standards
- Manufacturer: EWMenn
- Model: GW32
Flat die threading machine E.W. MENN GW32 Completely overhauled acc. CE Standards New Guides, new vibrator, new vibrating evacuation. New electrical system with Inverter and PLC M4x50/30 mm. 750 ppm To view...
Calolziocorte, Italy 
ZDAS 630 OPEN DIE FORGING PRESS
- Manufacturer: Zdas
Open die forging press Man: ZDAS Model : CKW 630 Force : 630 Ton Daylight: 1,800 mm Stroke min: 100- 120 Kw : 650
Italy- Trusted Seller
CARLO SALVI SPV - operationa, fully functional - Revised in 2024
- Manufacturer: Carlo Salvi
CARLO SALVI PSV operational, fully functional Revised in 2024. Technical information: diam. min. and max. wire: 0,8 - 1,3 mm. max. cutoff length: 37 mm. max. shank length: 25 mm. max production per min.: 60...
Calolziocorte, Italy - Trusted Seller
COLF FORMING MACHINE FIDE EF-180 REFURBISHED acc. to CE Standards - d.14x200 mm. - 1D 2B
- Manufacturer: Fide
COLD FORMING MACHINE FIDE EF-180 Refurbished acc. To CE Standards for long screws until 200 mm. 1 DIE 2 BLOW Range production: d.14x200 mm. Speed: 75 pcs. per minute Completely refurbished by HBR acc. to CE...
Calolziocorte, Italy - Trusted Seller
DOUBLE-STROKE HEADER CARLO SALVI PSV refurbished acc. to CE Standards
- Manufacturer: Carlo Salvi
DOUBLE-STROKE HEADER CARLO SALVI PSV 1 Die 2 Blow Refurbished by H.B.R. srl acc. to CE Standards DOUBLE-STROKE HEADER CARLO SALVI PSV Number of die: 1 Number of punches: 2 Min. and max. wire diam.: 0,8 ÷ 3 ...
Calolziocorte, Italy - Trusted Seller
DOUBLE STROKE HEADER SACMA SP.01 refurbished acc. to CE Standards
- Manufacturer: Sacma
DOUBLE STROKE HEADER SACMA SP.01 Refurbished acc. to CE Standards. Available c/o HBR srl Test before shipment the machinery. Number of dies: 1 Number of punches: 2 Cutoff diameter (min./max.): 2 ÷ 4 mm. Ma...
Calolziocorte, Italy 
Open die forging press HYDROPRESS 600 Ton
- Manufacturer: Open die forging press HYDROPRESS 600 Ton
MAN : HYDROPRESS Force down : 600 Tons Force up : 41 Ton. Bars : 200 Stroke : 700 mm Die light : 1,500 mm dimension of tool holder : 1,200 mm x 1,500 mm Speed : mm/sec : 250 Working speed : mm/s 25 - 54 ...
Italy
OPEN DIE FORGING HY PRESS “SCHLOEMANN” 2000 t
- Manufacturer: SCHLOEMANN
OPEN DIE FORGING HY PRESS “SCHLOEMANN” 2000 t
Italy- Trusted Seller
MECHANICAL EXCENTRIC PRESS WITH TWO MOUNTING posts Construction : Model : ROVETTA S2 400-1600-1200 cod.516.400.02 product code: 20521
- Manufacturer: Rovetta
- Model: S2-400
Hurry! This product has already been viewed 7,145 times! Don't miss out! Selected machine Like-new condition TWO-POST MECHANICAL ECCENTRIC PRESS Serial number: 2537/1 PR33 Year: 1991 Lateral passage in shoulders:...
Mogliano Veneto, Italy - Trusted Seller
FICEP PVS 160
- Manufacturer: Ficep
- Model: PVS160
SCREW PRESS FOR FICEP MOLDING Screw diameter 160 mm Rated strength Ton 270 Max admissible continuous force Ton 400 Maximum gross energy Nm 12500 Strokes per minute 50 Height between table top and slide surface al...
Desio, Italy 
Open Die Forging 1600 Ton ZDAS line
- Manufacturer: Zdas
Force: MN 16 | Return force: MN 2,6 | (eccentric production): 200 mm | Max vertical stroke of the traverse: 1.250 mm | Die-light: 2.800 mm | Distance between the columns: 3.500 mm | Stroke: 2.000 mm | Dimension ...
Casale Sul Sile, Italy
open die forging press 5000 Ton INNSE with 40 Ton manipulator
- Manufacturer: Innse
Open Die Hydraulic Forging press Man : INNSE Force: 5,000 tons Distance beetwen columns: 3,600 m m complete with moving table and manipulator 40 Ton capacity
Italy
Rovetta S2-400 Forging Press
- Manufacturer: Rovetta
- Model: S2-400
Good condition Rovetta S2-400 Forging Presses available between 1974 and 1992 years. Located in United Kingdom and other countries. Click request price for more information.
United Kingdom
Tip: Enter manufacturer, model or keyword