- Trusted Seller

Tin Knocker 1655 Notcher
- Manufacturer: Tin Knocker
Product Description A heavy versatile tool capable of not only notching to capacity but also shearing and piercing operations in lighter gauge. Made of heavy cast iron and fabricated construction, this table top ...
Charlotte Hall, MD - Trusted Seller

Tin Knocker TK 1016 #6445
- Manufacturer: Tin Knocker
- Model: TK1016
Tin Knocker 10′ x 16 Gauge Straight Brake, TK 1016 Inventory # 6445 Rugged Spring Steel Nose Bar for Long Lasting, Durable Service Rebuildable with Bronze Bushings. No Steel on Steel or Wallowed Out Pivot Holes G...
- Trusted Seller

Tin Knocker 1655 Notcher
- Manufacturer: Tin Knocker
A heavy versatile tool capable of not only notching to capacity but also shearing and piercing operations in lighter gauge. Made of heavy cast iron and fabricated construction, this table top machine comes with f...
Charlotte Hall, MD - Trusted Seller

Tin Knocker TK 1016 Duct Notcher #7981
- Manufacturer: Tin Knocker
- Model: TK1016
Tin Knocker 10′ x 16 Gauge Duct Notcher, TK 1016 Inventory # 7981 Notches up to 6 times faster than hand notching. This 5 headed gang notcher is a fast and easy way to notch sheet metal ducting, in preparation to...
- Trusted Seller

Tin Knocker TK 1016 Duct Notcher #7981
- Manufacturer: Tin Knocker
- Model: TK1016
Tin Knocker 10′ x 16 Gauge Duct Notcher, TK 1016 Inventory # 7981 Notches up to 6 times faster than hand notching. This 5 headed gang notcher is a fast and easy way to notch sheet metal ducting, in preparation to...
- Trusted Seller

TIN KNOCKER TK 1655
- Manufacturer: Tin Knocker
- Model: TK1655
TIN KNOCKER TK1655 Manual Corner Notcher has a mild steel capacity of 16 gauge.Heavy versatile tool notches but also does shearing and piercing operations in lighter gauge.Heavy cast iron and fabricated construct...
$1,270 USDPort Orange, FL - Trusted Seller

TIN KNOCKER TK1016
- Manufacturer: Tin Knocker
- Model: TK1016
TIN KNOCKER TK 1016 Hydraulic Duct Notcher has a mild steel capacity of 16 gauge. This 5 headed gang notcher is a fast and easy way to notch sheet metal ducting, in preparation to receive bar, S Cleats and Drive ...
- Trusted Seller

TIN KNOCKER TK1016 LEAF
- Manufacturer: Tin Knocker
- Model: TK1016
TIN KNOCKER TK 1016 Manual Leaf Brake has a bending length of 10 feet and capacity of 16 gauge. These are industrial quality brakes, the kind you use over a lifetime. Our straight brakes set the standard for qual...
- Trusted Seller

TIN KNOCKER TK EDGE NOTCER
- Manufacturer: Tin Knocker
TIN KNOCKER Edge Notcher has a mild steel capacity of 20 gauge. The motor is 1/3 HP, 110 volt, Single Phase, 60Hz AC.Round surface edges for collars and end caps.INCLUDES BOTH SETS OF TOOLING, 1 machine to 2 notc...
$2,740 USDPort Orange, FL - Trusted Seller

TIN KNOCKER TK DRIVE CLEAT NOTCHER
- Manufacturer: Tin Knocker
TIN KNOCKER Drive Cleat Notcher has a mild steel capacity of 22 gauge.This tool notches drive cleats giving drives a rounded end for an easier installation. Notch drive cleats before or after they are formed. Eas...
$550 USDPort Orange, FL - Trusted Seller

TIN KNOCKER TK HYDRAULIC CORNER NOTCHER
- Manufacturer: Tin Knocker
TIN KNOCKER 6" x 6" x 16 gauge Hydraulic Corner Notcher has a Maximum notch in one cut of 6 x 6 inches and Capacity in mild steel of 14 gauge.Hydraulic System. 2 – Gauges (45 degree mitre on one end).Hardened ste...
$3,950 USDPort Orange, FL - Trusted Seller
TIN KNOCKER TK1016
- Manufacturer: Tin Knocker
- Model: TK1016
16 Ga. x 10', Tin Knocker, TK1016 Leaf Brake. This industrial hand brake features a 16-gauge capacity, 10' 1" bend length, and includes a spring steel nose bar, bronze-bushed pivot points, and a heavy plate fabri...
Pomona, CA - Trusted Seller

Tin Knocker TK-1016
- Manufacturer: Tin Knocker
- Model: TK1016
16 Ga. x 10' tin knocker TK-1016, New #SMTK1016 Capacity: 16 Ga. x 10' | Maximum bending length: 121" | Beam lift: 2-1/4" | Bending angle: 0-135 Degrees | Beam adjustment: 1" | Minimum reverse bend: 1/2" | Dept...
- Trusted Seller

Tin Knocker TK 1016 DUCT NOTCHER
- Manufacturer: Tin Knocker
- Model: TK1016
16 Ga. x 10' tin knocker TK 1016 DUCT NOTCHER, New #SMTK1016DN
- Trusted Seller

20 Ga. tin knocker New #SMTKEdge
- Manufacturer: Tin Knocker
20 Ga. tin knocker New #SMTKEdge Capacity: 20 Ga. | Depth of notch: 0 - 3/4" | Width of notch: 3/16" | Spacing: 3/4" - 1 7/16" | Speed: Variable - Minimum 18 FPM | Horsepower: 1/3 HP | Voltage: 110V | Dimension...
$2,350 USDLos Angeles, CA 
Tin Knocker TK1016 Notching Machine
- Manufacturer: Tin Knocker
- Model: TK1016
Good condition Tin Knocker TK1016 Notching Machines manufactured in 2019. Located in USA and other countries. Click request price for more information.
USA

