Used Timesavers in Ohio, USA

Timesavers 36" Belt Sander - 137-1hdmw

• Manufacturer: Timesavers
• Model: 137-1HDMW

W/hydraulic Unit, 1 Hp, 1750 Rpm, (3640#) 85x78x93, (825#) 72x55x30, *contains 2 Pieces

TIMESAVERS 137-1HDMW #0134525

• Manufacturer: Timesavers
• Model: 137-1HDMW

Belt width: 37" | Part width: 36-1/2" | Standard belt size: 37" x 60" | Part thickness: 8" | Conveyor feed rate: 15 TO 45 FPM

TIMESAVERS 137-1HDM #1162221

• Manufacturer: Timesavers
• Model: 137-1HDM

2 used belts and 4 new belts included. 71"x45"x68-1/4" footprint. 2600 lbs.

TIMESAVERS 337M-1 #0903824

• Manufacturer: Timesavers

TIMESAVERS 137-1MW #1052122

• Manufacturer: Timesavers

20 HP 3/60/220-440 volt abrasive drive belt motor Electrical Controls

37" TIMESAVERS Belt Sander Z20028

• Manufacturer: Timesavers
• Model: 137-1HPM

AGE: 2001 MODEL NUMBER: 137-1HPM TEMPORARY SPECIFICATIONS: Belt Size: 37" x 75" Contact Wheel Diameter: 6" Part Height: 0 to 5" Conveyor Speed: 15 to 45 FPM NOTE: Per Factory new price as of May ...

37" TIMESAVER WOODWORKING BELT SANDER 15038C

• Manufacturer: Timesavers
• Model: 337-3HD

MODEL #: 337-3HD SERIAL #: 20310 37" MAXIMUM WIDTH 3 GRINDING HEADS HEAD 1 CONTACT DRUM 30 HP HEAD 2 PLATEN 20 HP HEAD 3 PLATEN 20 HP 10 HP BELT FEED MOTOR ELECTRIC EYE TRACKING VARIABLE SPEED SOLID RUBBER FEED...

Timesavers 36" X 94" Belt Sander - Lynx 37mwt-dbb-60

• Manufacturer: Timesavers
• Model: LYNX 37MWT-DBB-60

W/hydraulic Unit, Rollers, Parts, Timesavers Control, Made In Taiwan, (5420#) 128x79x91, (1260#) 50x34x29, (1145#) 102x62x33, *contains 3 Pcs

36" TIMESAVER DUAL HEAD BELT SANDER 12050B

• Manufacturer: Timesavers
• Model: 336 M-2

MODEL: 336 M-2 SERIAL #: 6089 DUAL HEAD 36" BELT WIDTH 36" x 75" BELT SIZE 20-60 FPM FEED SPEED HOLD DOWN SHOES PNEUMATIC TRACKING MOTOR: (2) 25 HP, 230/460/60/3 2 HP FEED BELT YEAR: 1973 2 HP FEED BELT

2013 37" TIMESAVERS "LYNX 37MWT-DBB-60" THREE-HEAD WET-DRY WIDE ABRASIVE-BELT FLAT PART DEBURRING FINISHING SANDER - DRUM HEAD FOLLOWED BY (2) BRUSH HEADS - 20 HP MOTOR

• Manufacturer: Timesavers

37" TIMESAVERS "LYNX 37MWT-DBB-60" THREE-HEAD WET-DRY ABRASIVE BELT FLAT PART DEBURRING/FINISHING SANDER New 2013, Serial No 32403, Model 37MWT-DBB-60, Mfgr No 131878MD, Series "Lynx" EQUIPPED WITH: Drum Head Fol...

1500MM x 4MM TIMESAVERS SHEET TO SHEET POLISHING LINE

• Manufacturer: Timesavers

1500MM x 4MM TIMESAVERS SHEET TO SHEET POLISHING LINE MANUFACTURER - TIMESAVERS YEAR - 2003 SHEET WIDTH - 1500MM SHEET LENGTH - 800-4000MM SHEET THICKNESS - 0.6MM - 4.0MM LOAD & UNLOAD TRAVEL SPEED - 45M/MIN ...