Used Three Knife Trimmers in France

1990 MULLER MARTINI THREE KNIFE TRIMMER

• Manufacturer: Müller Martini

2 WAY ROTARY TRIMMING SYSTEM Infeed into; Unit 1 with 2 x trimming knives Right angle unit into; Unit 2 with 2 x trimming knives with a shingle gap of 40mm This corresponds to a max. capacity of 90,000c/h Trim re...

1988 Wohlenberg 38 FA Trimmer

• Manufacturer: Wohlenberg
• Model: 38FA

Max. trimmed size : 380 x 300 mm, Min. trimmed size : 80 x 50 mm, Max. untrimmed size : 410 x 315 mm, Height of pile : max. 100 mm, Height of pile : min. 10 mm, Capacity : max. 20 cycles/min.

1985 WOHLENBERG 38FA

• Manufacturer: Wohlenberg
• Model: 38FA

1995 Wohlenberg 38FS40

• Manufacturer: Wohlenberg
• Model: 38

Size untrimmed max 410 x 315 mm Size trimmed max 380 x 300 mm Size trimmed min 80 x 50 mm Feeding height max 100 mm False opening max 130 mm Table height 900 mm

1995 WOHLENBERG 38 FS 40

• Manufacturer: Wohlenberg
• Model: 38

Automatic trimmer＜＞Infeed belt from the right side＜＞Central lubrication＜＞Prestacker＜＞Quick setting table1 set of standard tools＜＞Belt delivery＜＞Formats :＜＞Maximum untrimmed format: 410 x 315 mm＜＞Maximum format tr...

2018 HORIZON HT 30

• Manufacturer: Horizon
• Model: HT-30

- OPERATION: STACK AND CUT UP TO 10 COPIES AT THE SAME TIME AND FULL AUTOMATIC＜＞- CUTTING PROCESS: KNIFE WORKS IN TWO DIRECTIONS -＞ CUTS WITHOUT DAMAGES＜＞- CONVEYOR: STACK TRAY OF THE CUT BOOKS＜＞- SAVEABLE JOBS: ...

2001 KOLBUS HD 150

• Manufacturer: Kolbus
• Model: HD

Kolbus HD 150.B＜＞Copilot system with monitor＜＞Infeed from the right＜＞Knife changing device＜＞Set of Knives

1997 KOLBUS HD 140.P

• Manufacturer: Kolbus
• Model: HD

automatic infeed with integrated pre stacker＜＞• gripper loading＜＞• cut counter＜＞• automatical speed regulation＜＞• offcut blower＜＞• Equipment for sheet-fed＜＞• 1 set of clamping plates and holders＜＞• 1 set cutting ...

1996 WOHLENBERG Trim-Tec 56i

• Manufacturer: Wohlenberg
• Model: Trim-Tec

Quickset＜＞Auto-Positionierung (AP)＜＞Book infeed＜＞Integrated control panel＜＞Delivery conveyor (1,6m)＜＞Stepless adjustment of delivery conveyor speed

2004 HORIZON HT 70

• Manufacturer: Horizon
• Model: HT-70
• Power requirement: 3 kW

Overhauled Max. untrimmed: 330x330 mm | Min. untrimmed: 148x105mm | Max. trimmed: 300x300 mm | Min. trimmed: 100x142 mm | Trimming accuracy: Within 0.5 mm (0.02") | Mech. speed: 1000 cycles/h. (A4T) | Power consu...

2008 HEIDELBERG ET 1000

• Manufacturer: Heidelberg
• Model: ET 1000

Standard equipment Formats untrimmed: Book block width: 105 mm–345 mm / Book block height: 110 mm–480 mm Formats trimmed: Book block width: 90 mm–330 mm / Book block height: 100 mm–470 mm Compressed air supply:: ...

2013 HORIZON HT 30

• Manufacturer: Horizon
• Model: HT-30

counter 4.761.683＜＞Standard equipment＜＞Overhauled Max. untrimmed: 320x235 | Min. untrimmed: 200x134 | Max. trimmed: 305x230 | Min.trimmed: 200x134 | Stock thickness: 1 to 50 mm | Mech. speed: 520 books/hr | Power...

2008 HORIZON HT 30

• Manufacturer: Horizon
• Model: HT-30

-Touch screen＜＞-Feed table＜＞-Stacker delivery＜＞Cleaned, checked and repainted

2010 CHALLENGE CMT 130

• Manufacturer: Challenge
• Model: CMT 130

Standard equipment Max. trimmed: 140x100 mm | Min.trimmed: 0.125" / 3.2 mm | Stock thickness: 2" / 50.8 mm | Mech. speed: up to400 Books Per Hour (single book) / 1000 Books Per Hour (multi-book) | Hs code: 844399...

1991 KOLBUS HD 150

• Manufacturer: Kolbus
• Model: HD

Mod. HD 150A＜＞Infeed Belt, ＜＞Integrated Pre-Stacker, ＜＞Integrated Control Panel, ＜＞Security Guards, ＜＞Delivery Belt,