Used max. in Canada

MAX-TEK 2

• Manufacturer: MAX-TEK
• Threading length: 76.2 mm

Equipped With * Vibratory Bowl Thread diameter: .050" - .200" (Ring shank) | Max. thread length: 3" | Speed: 1500 ppm | Motor: 15hp | Electrics: 480volts/3ph/60cyl | Dimensions: 4'W x 5.5' L approx. | Weight: 300...

FDY-60A THREE DIE CYLINDRICAL THREAD ROLLING MACHINE

Equipped With Catalog Specifications: Maximum Thread Length (In-feed): 48mm Maximum Thread Length (Thru-feed): Unlimted

2013 TESKER 230

• Manufacturer: TESKER

Equipped With Max. Threading Diameter Up To 2-1/2" * Spindle Speeds VARIABLE * Complete with Hydraulic Pump and Tank

HARTFORD 40-140

• Manufacturer: Hartford
• Model: 40-140

Equipped With Low Hours, 1380 * AIM P270 power dereeler * Feed rolls/tooling for .108 .125 .157 .188 .250 .313 * Ring tools for .250 and .313 * Stand alone ring butt welder Max Wire Tensile at Max Wire Dia: 550N/...

REED A23

• Manufacturer: Reed
• Model: A23

Equipped With Min. - Max. Threading Diameter (In-feed): 1/4" - 3-3/4" Min. - Max. Thread Diameter (Thru-feed): 1/4" - 1" Maximum Thread Length (In-feed): 2-3/8" Maximum Thread Length (Thru-feed): 11"

2002 KINEFAC MC-4

• Manufacturer: KINEFAC

Equipped With Max. Threading Diameter (In-feed): 1-1/2" Max. Thread Diameter (Thru-feed): 3/4" Min. Diameter Infeed or Thrufeed: 1/32"

REED B111

• Manufacturer: Reed
• Model: B111
• Threading length: 47.63 mm

Equipped With Max. Threading Diameter (In-feed): Up to 2" Maximum Thread Length (In-feed): 1-7/8"

2021 GOVAMA HK25

• Manufacturer: GOVAMA

Equipped With Min. Threading Diameter (In-feed): 3 0.118) Max. Threading Diameter (In-feed): 48mm (1.889”) Maximum Thread Length (In-feed): 170mm (6.692") * Heavy duty 3”dia spindles * 7” Rexroth PLC control scre...

1980 KINEFAC MC-5F

• Manufacturer: KINEFAC

Equipped With Maximum thread diameter: 2 inches | Maximum thread diameter, thrufeed: 1.5" | Maximum rolling force: 6 tons | Max die width: 2.250 inches | Die length: 4 inches | Spindle diameter: 2 inches | Spindl...

WAFIOS UNT20 (3/4")

• Manufacturer: Wafios

Equipped With Features: * Tapping, Boring & Counter-boring of Special Nuts * Specially Suited to Thread Blind Borings & Extremely Long Parts * PLC Control & Process Tap Monitoring * Full Electronically Control of...

National 3/4″ x 7″

• Manufacturer: National
• Model: 3-4

Equipped With Features: PKO Trim Maximum cutoff diameter: 1 inches | Maximum wire diameter: .750 inches | Maximum cutoff length: 10 inches | Minimum cutoff length: 1.5 inches | Maximum kickout length: 7 inches | ...

WAFIOS Model MAS-14F (14mm)

• Manufacturer: Wafios

Equipped With Features: * Tapping Precision Thread of Hex, Square, Flange, Round, 12 Point, Wheel & Special Nuts * Pitch Cam Feed Control * PLC Control & Process Tap Monitoring * Variable Speed DriveØ Very Low T....

HARTFORD 10-400

• Manufacturer: Hartford
• Model: 10-400
• Threading length: 76.2 mm

Equipped With FEATURES: #285-2 conveyor included 36" bowl and stand included Oil pan included Coolant pump and tank included Ace 200 monitor LorBern Starting System

HARTFORD 10-400

• Manufacturer: Hartford
• Model: 10-400
• Threading length: 76.2 mm

Equipped With * Setup for vib bowl Feed ** Requires Vib feeder bowl

WAFIOS UNT12 (1/2")

• Manufacturer: Wafios

Equipped With Specifications: Features: * Tapping, Boring & Counter-boring of Special Nuts * Specially Suited to Thread Blind Borings & Extremely Long Parts * PLC Control & Process Tap Monitoring * Full Electroni...