Machine Tools » Threading & Tapping » Canada

Search By Manufacturer

Search By Province

Building Filters

56

Used force in Canada

  • Trusted Seller
    MACHINE PRODUCTS BM

    MACHINE PRODUCTS BM

    • Manufacturer: MACHINE PRODUCTS

    Equipped With These machines are for the manufacture of long screws & bolts, fully automatic from wire coil to finished product. A single machine, consisting of harmonized components, can perform the following op...

    Vaughan, Canada
  • Trusted Seller
    SENY D-80B

    SENY D-80B

    • Manufacturer: SENY
    • Threading length: 196,850 mm

    Equipped With Maximum thread diameter: 3.125 inches | Electrics: 220V | Infeed thread length: 7.750 inches | Thrufeed diameter: 1.5 inches | Maximum rolling force: 30 tons | Spindle diameter: 2 inches | Main moto...

    Vaughan, Canada
  • Trusted Seller
    2024 GOVAMA HK-18

    2024 GOVAMA HK-18

    • Manufacturer: GOVAMA

    Equipped With • High speed gearbox • High efficiency 10hp variable speed motor • Semi Hydraulic (re. Hydraulic system is used for positioning of moveable body (not applying rolling force). • Thread dies are using...

    Vaughan, Canada
  • Trusted Seller
    BRANDT 3R Series Model 3R-150

    BRANDT 3R Series Model 3R-150 (150Ton) Three Die Cylindrical Thread Rolling Machine

    • Manufacturer: Brandt

    Equipped With > The 3R series of hydraulic rolling machines are equipped with three rolling spindles, & with three moving heads. > All machines equipped with AC Drives. > Automation, PLC/CNC options are available...

    Vaughan, Canada
  • Trusted Seller
    GOVAMA Model 3R-150 (150Ton)

    GOVAMA Model 3R-150 (150Ton)

    • Manufacturer: GOVAMA

    Equipped With Specifications: Features: > The 3R series of hydraulic rolling machines are equipped with three rolling spindles, & with three moving heads. > All machines equipped with AC Drives. > Automation, PLC...

    Vaughan, Canada
  • Trusted Seller
    1995 ORT RP-100/U

    1995 ORT RP-100/U

    • Manufacturer: ORT

    Maximum thread diameter: 160 millimeters | Minimum thread diameter: 4 millimeters | Maximum rolling force: 100 tons | Max die width: 300 millimeters | Spindle diameter: 100 millimeters | Machine head inclindatio...

    Vaughan, Canada
  • Trusted Seller
    REED A22

    REED A22

    • Manufacturer: Reed
    • Model: A22

    Equipped With Specifications for Diameter & Thread lengths are Infeed only

    Vaughan, Canada
  • Trusted Seller
    GOVAMA Model K-15 (15Ton)

    GOVAMA Model K-15 (15Ton)

    • Manufacturer: GOVAMA

    Equipped With Specifications: Features: > The K series of hydraulic rolling machines are equipped with two rolling spindles, with one moving head in linear guides which have auto lubrication system. > K series ha...

    Vaughan, Canada
  • Trusted Seller
    GOVAMA Model K-50 (50Ton)

    GOVAMA Model K-50 (50Ton)

    • Manufacturer: GOVAMA

    Equipped With Specifications: Features: > The K series of hydraulic rolling machines are equipped with two rolling spindles, with one moving head in linear guides which have auto lubrication system. > K series ha...

    Vaughan, Canada
  • Trusted Seller
    BRANDT K SERIES Model K-15

    BRANDT K SERIES Model K-15 (15Ton) 2Die Cylindrical Thread Rolling Machine

    • Manufacturer: Brandt

    Equipped With > The K series of hydraulic rolling machines are equipped with two rolling spindles, with one moving head in linear guides which have auto lubrication system. > K series have an open-top area which ...

    Vaughan, Canada
  • Trusted Seller
    BRANDT K SERIES Model K-50

    BRANDT K SERIES Model K-50 (50Ton) 2Die Cylindrical Thread Rolling Machine

    • Manufacturer: Brandt

    Equipped With > The K series of hydraulic rolling machines are equipped with two rolling spindles, with one moving head in linear guides which have auto lubrication system. > K series have an open-top area which ...

    Vaughan, Canada
  • Trusted Seller
    2000 ORT RP-10

    2000 ORT RP-10

    • Manufacturer: ORT

    Equipped With * Inclinable spindles ** A Few sets of dies

    Vaughan, Canada
  • Trusted Seller
    1980 KINEFAC MC-5F

    1980 KINEFAC MC-5F

    • Manufacturer: KINEFAC

    Equipped With Maximum thread diameter: 2 inches | Maximum thread diameter, thrufeed: 1.5" | Maximum rolling force: 6 tons | Max die width: 2.250 inches | Die length: 4 inches | Spindle diameter: 2 inches | Spindl...

    Vaughan, Canada
  • Trusted Seller
    BRANDT K SERIES Model K-40

    BRANDT K SERIES Model K-40 (40Ton) 2Die Cylindrical Thread Rolling Machine

    • Manufacturer: Brandt

    Equipped With > The K series of hydraulic rolling machines are equipped with two rolling spindles, with one moving head in linear guides which have auto lubrication system. > K series have an open-top area which ...

    Vaughan, Canada
  • Trusted Seller
    BRANDT ROT Series Model ROT-1

    BRANDT ROT Series Model ROT-1 Two Die Two Station 25tons PLC Controlled Cylindrical Thread Rolling Machine

    • Manufacturer: Brandt

    Equipped With > The ROT-1 machine has been designed & produced to meet ball stud producers with high volume demand > There are total of 2 stations for different rolling forms. At station 1 the burnishing process ...

    Vaughan, Canada
1234

Overview

Threading and tapping machines are used in manufacturing to create threads inside holes (tapping) or on the exterior of components (threading). These machines are essential for producing threaded parts that fit together with screws, bolts, or other fasteners, ensuring precision and consistency in mechanical assemblies.

FAQ

What factors should I consider when buying a used threading or tapping machine?

Consider the machine's age, condition, and maintenance history. Check for any signs of wear or damage and ensure it meets the specific threading and tapping requirements of your projects.

How can I safely ship a threading or tapping machine?

Use a reliable transport service that specializes in heavy machinery. Ensure the machine is securely fastened and properly protected to avoid damage during transit.

What maintenance is required for threading and tapping machines?

Regular maintenance includes lubricating moving parts, checking for wear and tear on essential components, and ensuring the machine's calibration remains accurate. Refer to the manufacturer's manual for a detailed maintenance schedule.