Used Threading & Tapping in Canada

National 3/4″ x 7″

• Manufacturer: National
• Model: 3-4

Equipped With Features: PKO Trim Maximum cutoff diameter: 1 inches | Maximum wire diameter: .750 inches | Maximum cutoff length: 10 inches | Minimum cutoff length: 1.5 inches | Maximum kickout length: 7 inches | ...

PRUTTON 125B-HV

• Manufacturer: Prutton
• Model: 125B-HV
• Threading length: 76.2 mm

Equipped With * Twin Ferris Wheel Feeder Drums Max. diameter: 1/4" | Max. thread length: 3" | Underhead blank length: 3" | Speed: 600-800 ppm (up to 1800ppm w/air jet feed) | Hopper capacity: 120 lbs

1975 National 6L4

• Manufacturer: National
• Model: 6L4
• Threading length: 44,450.0 mm

Maximum cutoff diameter: .375 inches | Number of dies: 4 | Maximum cutoff length: 4.5 inches | Maximum kickout length: 3.125 inches | Minimum kickout length: .750 inches | Minimum cutoff length: .875 inches | Ma...

3/4″ National 4DIE BOLTMAKER

• Manufacturer: National
• Model: 3-4
• Threading length: 78 mm

Equipped With Max cutoff diameter: 22 mm (.866") | Min/max kickout: 30 - 160 mm (1.181" - 6" | Min/max cutoff length: 38 - 200 mm (1.496" - 7.874") | Max thread length: 78 mm (3") | Max output: 90 PPM | Heading l...

National 10L4

• Manufacturer: National
• Model: 10L4

Equipped With * IFO Transfer Location: Number of dies: 4 | Number of stations: 5 | Maximum wire diameter: 5/8" | Maximum length underhead: 4-3/8" | Min. length underhead: 1-1/8" | Max. cutoff length: 5-3/4" | Min...

6 in. Oster Pipe and Bolt Threader, Model 716

6 inch "Oster" pipe and bolt threader, Model 716 Model (Cat. No.) 716 Headstock mounted push button control Heavy duty three phase motor, It's now in our heated warehouse, and can be shipped on two days notice. I...

Oster 784 Pipe and Bolt Threader up to 4″

"Normal wear from use." Oster Threader 4'' Model 784 RE121 Only $4,899 USD! Excluding shipping. Sold as is, but warranted in good condition. We're quite friendly and It's much faster than back and forth messages ...

Oster 716 Pipe and Bolt Threader 6″ model LE31

"Normal wear from use." Oster 716 LE31 Pipe and Bolt Threader 6″ capacity. Only $6,899.00 USD! Excluding shipping. Sold as is, but warranted in good condition. We're quite friendly and It's much faster than back ...

National JWS-165-L, 4x5 Triplex Mud Pump Package

• Manufacturer: National
• Model: 5L4

Used National JWS-165L, 4x5 Triplex Mud Pump Package, 4" Metal Plungers x 5" Stroke, Steel Fluid End, Factory Gear Reducer, Lubricator, Skid Mounted & Housed with 6V-92T Detroit Diesel Engine with turbo, Spicer M...

Volumec Drillotronic DTS161250 Drilling and Tapping CNC

Specifications 3 Phase

Masteel HDT-24 Double Column Machines

• Manufacturer: Masteel

Masteel HDT-24 Double Column Machines HIGH SPEED MILLING, DRILLING, & TAPPING MACHINE

Masteel HDT-21 Double Column Machines

• Manufacturer: Masteel

Masteel HDT-21 Double Column Machines HIGH SPEED MILLING, DRILLING, & TAPPING MACHINE

Masteel HDT-18 Double Column Machines

• Manufacturer: Masteel

Masteel HDT-18 Double Column Machines HIGH SPEED MILLING, DRILLING, & TAPPING MACHINE

WHEELER-REX 6390

• Manufacturer: WHEELER-REX
• Phase type: Single-phase

Voltage: 120 volts | Phase: Single-phase | Amps: 9 amps | Made in: JAPAN | Maximum pipe range: 1/4" - 2"