Processing » Thermoforming » Baden-Württemberg

Search By Manufacturer

Search By Type

Building Filters

37

Used processing in Baden-Württemberg, Germany

  • Trusted Seller
    Niebling HPF SAMK400 High Pressure

    Niebling HPF SAMK400 High Pressure Forming Machine & NST 100 Intelligent Servo Punch (2022)

      Niebling HPF SAMK400 High Pressure Forming Machine & NST 100 Intelligent Servo Punch (2022) Niebling HPF SAMK400 High Pressure Forming Machine (2022) with EEM module automatic film loading from magazine stack FAM...

      Radolfzell, Germany
    • Trusted Seller
      2022 Power Supply Emerson 4.00DCXs20HOR

      2022 Power Supply Emerson 4.00DCXs20HOR

      • Manufacturer: Emerson

      Item Description/Artikelbeschreibung: Lot consists of: (1) Power Supply Position besteht aus: (1) Netzteil Further Information/Weitere Informationen The Auctioneer shall not be responsible for the correct descrip...

      Baden-Württemberg, Germany
    • ILLIG automatic panel feeder |

      ILLIG automatic panel feeder | UA 101 L / + BE 101 L with VHZ

      • Manufacturer: Illig
      • Model: UA

      Pyrometer in top heater for temperature measurement on the film Retrofitting roll processing

      Stuttgart, Germany
    • ILLIG universal forming machine |

      ILLIG universal forming machine | UA 250 4G BE 250 PR FHZ

      • Manufacturer: Illig
      • Model: UA250

      Max. material size 2500 x 1500 mm Siemens S7 control system Fully automatic setup function Top heating with 7 pilot lamps via screen S7 joystick (motorized travel) Bottom heating with 7 pilot lamps via screen S7 ...

      Stuttgart, Germany
    • 1992 ILLIG universal forming machine

      1992 ILLIG universal forming machine | UA 150 4g BE 150 PR VHZ

      • Manufacturer: Illig
      • Model: UA

      Schleicher P03 screen control Automatic setup function Top heating via 5-zone control Bottom heating via 3-zone control Upper die system with remote control Heating fan reinforced (D06) Automatic pre-blowing and ...

      Stuttgart, Germany
    • ILLIG accessory machine | S-Bli

      ILLIG accessory machine | S-Bli 50

      • Manufacturer: Illig

      Blister length: min. 110 mm - max. 500 mm | Cardboard wide: min. 50 mm - max. 280 mm | Blister depth: 80 mm | Umbugrand: 13 mm

      Stuttgart, Germany
    • ILLIG skin and blister machine

      ILLIG skin and blister machine | SB 53

      • Manufacturer: Illig
      • Model: SB

      Shaping surface: 500 mm x 350 mm x 100 mm

      Stuttgart, Germany
    • ILLIG heat sealing press |

      ILLIG heat sealing press | HSP 35 b-4

      • Manufacturer: Illig

      Sealing surface: Max. 350 mm x 250 mm | Blister depth: Max. 70 mm - 100 mm depending on product type | Sealing power: 12.800 N | Heating capacity of the seal heater: 1,75 kW

      Stuttgart, Germany
    • ILLIG Roll Punch | ZSM

      ILLIG Roll Punch | ZSM 150

      • Manufacturer: Illig
      • Model: ZSM

      Passage width: 1500 mm | Passage height: 120 mm

      Stuttgart, Germany
    • ILLIG Roll Punch | ZSM

      ILLIG Roll Punch | ZSM 45

      • Manufacturer: Illig
      • Model: ZSM

      Passage width: 450 mm | Passage height: 100 mm | Table surface: 700 mm

      Stuttgart, Germany
    • ILLIG automatic plate dispenser |

      ILLIG automatic plate dispenser | UA 250 G

      • Manufacturer: Illig
      • Model: UA250

      Plate size: 1500 x 2500 mm | Shaping surface: 1450 x 2450 mm | Draw depth: 600 mm

      Stuttgart, Germany
    • ILLIG automatic panel feeder |

      ILLIG automatic panel feeder | UA 150 ED

      • Manufacturer: Illig
      • Model: UA

      Plate size: 1000 x 1500 mm | Shaping surface: 960 x 1460 mm | Draw depth: 600 mm

      Stuttgart, Germany
    • ILLIG automatic roller conveyor |

      ILLIG automatic roller conveyor | RDKP 54

      • Manufacturer: Illig
      • Model: RDKP54

      Forming area max. 380 x 500 mm Film width max. 540 mm Drawing depth max. 120 mm positive, 120 mm negative

      Stuttgart, Germany
    • ILLIG retrofit | Automatic feeding

      ILLIG retrofit | Automatic feeding plate/roll

      • Manufacturer: Illig

      For automatic plate dispenser

      Stuttgart, Germany
    • ILLIG Roll Punch | ZSM

      ILLIG Roll Punch | ZSM 65

      • Manufacturer: Illig
      • Model: ZSM

      Passage width: 650 mm | Passage height: 100 mm | Dimensions (l / w / h): 1690 mm x 1070 mm x 1425 mm | Table surface: 800 mm

      Stuttgart, Germany
    123

    Overview

    Thermoform packaging involves heating a plastic sheet until it becomes pliable and then forming it into a specific shape using a mold. This type of packaging is commonly used for consumer goods, electronics, food, and medical products due to its flexibility, durability, and cost-effectiveness. It can be customized to fit the unique dimensions of the product, ensuring protection and aesthetic appeal.

    FAQ

    What materials are commonly used in thermoform packaging?

    Common materials include PET, PVC, HIPS, and PP. Each material has different properties suited for various applications, such as food safety or durability.

    How can I ensure the quality of thermoform packaging?

    Check for consistent thickness, clarity, and uniformity in the packaging. Ensure that the molds are precisely made to avoid defects.

    What are the shipping considerations for thermoform packaging?

    Ensure that the packaging is securely packed to avoid deformation during transit. Use appropriate protective materials and consider the volume and weight for shipping costs.

    What maintenance is required for thermoform packaging machinery?

    Regularly inspect the heating elements, molds, and forming stations. Clean the machinery to prevent contamination and ensure it operates at optimal efficiency.