Used Heat Exchangers

Block Heat Exchanger 187.5 m² (2,018 ft²) - IPP# 246426

• used

• Manufacturer: Kapp

Additional Info:

Stainless Steel Austenitic Air Fin Heat Exchanger - IPP# 222358

• used

• Manufacturer: Balke Durr

fin fan overhead cooler design pressure 3.2 bar @ 135 degrees C working pressure 1 bar @ 60 degrees C fins are 54mm diameter (2) appox 46.5 m3/second type LPVT 4 ventilator fans mounted underneath 2500mm diameter

Calorplast PVDF Corrosive Media Tube Plate Heat Exchanger 45gpm 116PSIG 55°F

• new

• Manufacturer: Calorplast

“NEW OLD STOCK.” Calorplast PVDF Corrosive Media Tube Plate Heat Exchanger 45gpm 116PSIG 55°F Calorplast PVDF Corrosive Media Tube Plate Heat Exchanger 45gpm 116PSIG 55°F Shipping Shipping cost: Calculated Freigh...

Shell and Tube Heat Exchanger 511 m² (5,500 ft²) Carbon Steel - IPP# 246930

• used

• Manufacturer: Houston Heat Exchanger

Methanol Vaporizer

Unused Southern Heat Exchanger Corp. approximately 2,395 square foot Shell and Tube Heat Exchanger

• used

• Manufacturer: Southern Heat Exchanger Corp.

Unused Southern Heat Exchanger Corp. approximately 2,395 square foot Shell and Tube Heat Exchanger. 39” diameter X 9’ 5” face to face length. Carbon steel shell rated 602 PSI @ 15 to 500 degrees F. (1296) 3/4” Al...

Tantalum Titanium Industrial Shell and Tube Heat Exchanger - IPP# 205997

• used

• Manufacturer: Titanium Industrial

budle for steam heat in and condensate return designed for mounting horizontal inside a tank. Tank side contact parts (OD of tubes and tubesheet) are covered in Tantalum Steam side designed for 250PSI @ 400 degre...

Unused Southern Heat Exchanger Inc. approximately 5,331 square foot Shell and Tube Heat Exchanger

• used

• Manufacturer: Southern Heat Exchanger Corp.

Unused Southern Heat Exchanger Inc. approximately 5,331 square foot Shell and Tube Heat Exchanger. 54.25” diameter X 12’ face to face length. Carbon steel shell rated 301 PSI @ -20 to 500 degrees F. (2359) 3/4” a...

ITT 5-030-05-024-002 Tube & Shell Heat Exchanger – Industrial Grade

• new

• Manufacturer: ITT

“New” ITT 5-030-05-024-002 Tube & Shell Heat Exchanger – Industrial Grade ITT 5-030-05-024-002 Tube & Shell Heat Exchanger – Industrial Grade THIS ITEM IS USED. CLEAN AND WELL KEPT. SEE ALL PHOTOS FOR FULL COND...

PERRY PRODUCTS COMPANY 18-508 FTSMX

• used

• Manufacturer: PERRY PRODUCTS COMPANY

used 500 Sq.Ft. Shell and Tube Heat Exchanger. 316L Stainless Steel TUBES: (216) 3/4" x 12' (8) Pass rated 75 PSI @ 20/320 Deg.F. SHELL is 18" Dia. x 14' OAL, rated 75 PSI @ 20/320 Deg.F. Tube inlet/outlet 3". Sh...

UK Exchanger UKE-1A

• used

• Manufacturer: UK Exchanger

UK Exchanger UKE-1A 43 Plate & Frame Heat Exchanger 87PSI 212°F UK Exchanger UKE-1A 43 Plate & Frame Heat Exchanger 87PSI 212°F Shipping Shipping cost: Calculated Freight - Outside Carrier Delivery time: Typicall...

APV HXC

• used

• Manufacturer: APV - Gaulin

18 Sq.Ft. APV Plate Exchanger. 2" inlet/outlet Ft2: 18.0 ft | Tube psig: 100 | Tube mat: SS | Horiz/vert: V | Shell psig: 100 | Shell pass: 1 | Tube pass: 1

APV SR6-GLM-T

• used

• Manufacturer: APV - Gaulin

Used approx. 275 Sq.Ft. APV Crepaco, Titanium, Plate Exchanger, Model # SR6-GLM-T. Rated for 100 psi @ 200 F. (37) 20" x 56" Titanium Plates with EPDM Gaskets. 5' 11.75" High x 20" Wide x 4' 2.5" Deep. Serial #76...

Hastelloy C22 Calorifier Shell and Tube Heat Exchanger - IPP# 247267

• used

Stainless Steel 316L Shell and Tube Heat Exchanger - IPP# 246071

• used

• Manufacturer: Ward Tank Co

Note: the NB Papers report this unit to be vertical, however it is set to be in the horizontal position. (AS)