Used Thermal Dynamics Plasma Cutters

Thermal Dynamics Plasma Cutter - Pakmaster 100xlp

• Manufacturer: Thermal Dynamics

Made In The Usa Name: Plasma Cutter | Arrival date: 07-08-2025 | Dimensions l x w x h (inches): 17 x 30 x 21 | Electrical: 3/50/60/230/460 | Weight (lb.): 160 | Available quantity: 1

Thermal Dynamics Professional Plasma Cutter - Cutmaster 102

• Manufacturer: Thermal Dynamics

Made In Usa Name: Plasma Cutter | Arrival date: 09-22-2025 | Dimensions l x w x h (inches): 40 x 25 x 15 | Weight (lb.): 70 | Available quantity: 1 | Make year: 2010

Thermal Dynamics Professional Plasma Cutter - Cutmaster 102

• Manufacturer: Thermal Dynamics

Made In Mexico Name: Plasma Cutter | Arrival date: 09-22-2025 | Dimensions l x w x h (inches): 40 x 25 x 15 | Weight (lb.): 70 | Available quantity: 1 | Make year: 2013

Thermal Dynamics Plasma Cutting System - Cutmaster 38

• Manufacturer: Thermal Dynamics

Name: Plasma Cutting System | Arrival date: 08-25-2025 | Dimensions l x w x h (inches): 26 x 15 x 18 | Electrical: 1/50/60/120/208/230/330 | Weight (lb.): 50 | Available quantity: 1 | Make year: 2005

Thermal Dynamics CM6032 (5) PM6042 Stak Pak II Plasma Cutter System Assembly

• Manufacturer: Thermal Dynamics

Powered up But no torch to test No Whip or Torch 5 Stack System If this item ships as Flat Rate Freight please see details in Shipping tab

Thermal Dynamics 100XT Ultra Cut High Precision Plasma Cutting System 35' Leads

• Manufacturer: Thermal Dynamics

Used, in Good Working Condition. Cables look like the cut head is 35' from this unit. Coolant hoses with black box is 14' from main unit. Comm wires are 20' long We do not have the means to fully test. If this it...

Thermal Dynamic Plasma Cutter

Thermal Dynamic Plasma Cutter Professional Model Sold As Is / Where Is

Thermal Dynamics DYNAPAK 4Xi 40 AMP Plasma Cutting System 220/230VDC 250VAC

• Manufacturer: Thermal Dynamics

“POWERED ON ; DID NOT TEST THE WELDING PART OF IT ,BUT SHOULD WORK. COMES WITH SOME TIPS. SEE PICTURES.” Thermal Dynamics DYNAPAK 4Xi 40 AMP Plasma Cutting System 220/230VDC 250VAC Thermal Dynamics DYNAPAK 4Xi 40...

Thermal Dynamics PakMaster 50 XL Plus Torch

• Manufacturer: Thermal Dynamics

Inspection January 19th - Bid Deadline January 20th - Removal January 21st

THERMAL DYNAMICS CUTMASTER A40 PLASMA CUTTER 0571934

• Manufacturer: Thermal Dynamics

“MAY HAVE SOME SHELF-WEAR .” THERMAL DYNAMICS PLASMA CUTTER MODEL NO. CUTMASTER A40 SERIAL NO. 0571934 INPUT VOLTAGE - 208-230V RATED OUTPUT - 40A,20-60A CUTTING CAPACITY - 1/4" PIERCING CAPACITY - 1/2" DUTY CYCL...

THERMAL DYNAMICS PLASMA CUTTER CUTMASTER 151 1-1/4" CUT CAPACITY 25-100 AMPS

• Manufacturer: Thermal Dynamics

“SHELF WARE” THERMAL DYNAMICS PLASMA CUTTER CUTMASTER 151 1-1/4" CUT CAPACITY 25-100 AMPS 208-230/ 600 VOLT 1- 3 PHASE AIR TYPE GAS 70 PSI 7.5 CFM MOTOR GUARD AIR FILTER M-26 35" X 13" X 16" OAL READ BEFORE BIDDI...

THERMAL DYNAMICS Cut master 101 Plasma Cutter 125 (psi) Max. Gas Pressure, 70 (psi) 400 ((scfh))

• Manufacturer: Thermal Dynamics

THERMAL DYNAMICS Cut master 101 Plasma Cutter 125 (psi) Max. Gas Pressure, 70 (psi) 400 ((scfh)) 20 amps. / 88 V to 80 amps. / 112 V, 460 V 34 amps. s/n. 04971487 (Loc. Bldg 38- Maintenance Shop-welding room)