Used Drilling Rigs

1995 CME 550X DRILL RIG #10923T

Manufactured 1995, Cummins 3.8L diesel engine, two lifting winches, water tank and pump, recently rebuilt (rear) drill transmission and overload clutch, 75’ hollow stem auger flights and 70’ drill rod, miscellane...

1996 CME 75 AUGER DRILL RIG #10416Ta

Manufactured 1996, Cummins 6 cylinder diesel deck engine, auto SPT, Moyno water pump, 2 winches (wireline), 150 gal water tank, mounted on 2005 International 7800 4 x 4 truck with diesel engine, manual transmissi...

1998 CME 550X DRILL RIG #1283Tb

Manufactured 1998, Drill completely rebuilt 2025 with everything new on the drill side brand new, 1 wireline winch, 1 main winch, 1 worker winch, auto hammer, Cummins diesel engine, 3L8 Moyno pump, CME breakout t...

2008 SCHRAMM T685WS-C #DRILL RIG 10786T

• Manufacturer: Schramm

Manufactured 2008, Reverse circulation, sliding angle drilling rig, Dual stage 1150/500 Sullair compressor with clutch (900/500 and 1,150/350), 93,000# pullback, tophead has 106,000 in-lbs torque, Cummins QSK19-C...

2004 INGERSOLL-RAND DM45LPXL900

• Manufacturer: Ingersoll Rand
• Model: DM-45
• Hours: 29,234 hour

2004 INGERSOLL-RAND DM45LP-XL900 LOW PRESSURE DRILL SERIAL NUMBER 7864 CAB WITH A/C, CUMMINS ENGINE 4 STEEL CAROUSEL DUST COLLECTOR ANGLE DRILLING AS OF NOV 1, 2022 WE HAVE REPLACED THE 2 SPOROCKS, 4 BOTTOM ROLLE...

GEFCO 22 MINI TOP HEAD DRILL RIG #8633T

• Manufacturer: Gefco

Manufactured 2000, 200 cfm air compressor, 3 x 4 Tibban mud pump, mounted on International truck with DT466 engine, top head needs rebuilding, main pump is leaking, transfer case is removed from rig, switch drive...

155 DRILL RIG #9723T

Manufactured 2007, 4x3 Mission Magnum mud pump, no air, uses 15’ drill pipe, slide out tophead that makes capable of setting 20’ casing with 4’ clearance from the ground, mounted on Ford 650 single axle truck wit...

SANDVIK D75KS ROTARY DRILL RIG #299T

• Manufacturer: Sandvik

Year 2011, Cat 3412 diesel engine, 100 psi Sullair LLC compressor, mounted on track, fleet maintained and in good condition, inspection report available on request Price $195,000 SANDVIK D25KW CRAWLER DRILL RIG

1998 INGERSOLL-RAND DM45E

• Manufacturer: Ingersoll Rand
• Model: DM-45E
• Horsepower: 600 horsepower

1998 INGERSOLL-RAND DM45E CRAWLER BLAST HOLE DRILL S/N 7282 A/C CAB CUMMINS 6 CYL 900 CFM 150 PSI AIR COMPRESSOR. 30FT MAST PART NUMBER 57501207, DUST COLLECTOR CAROUSEL AUTO ROD CHANGERS 3 HYDRAULIC STABILIZER H...

2009 ATLAS COPCO DML-LP

• Manufacturer: Atlas-Copco
• Model: DML-LP
• Drilling depth: 8.35152 meter

2009 Atlas Copco DML-LP XL1900 Crawler Mounted Blasthole Drill Enclosed Cab, Air Conditioner, CATERPILLAR C27 ENG,C27-830,XL1900,T2 8 Cylinder Diesel Engine Atlas Copco Part Number 2657915449. Rod Changer, Dust C...

1973 PORTADRILL 10TK DRILL RIG #2279Ta

• Manufacturer: Portadrill

Manufactured 1973, retrofitted to 60,000#, 20’ Kelly, 35’ derrick, 19D rotary table retractable (sets up to 20” casing), no air (compressor removed but PTO is there), no mud pump, Detroit diesel deck engine, moun...

2004 GEFCO/FAILING AUGER DRILL RIG #3160T

• Manufacturer: Gefco

) Manufactured 2004, (3) winches, mud pump (needs to be gone through), mounted on 2004 Ford F550 Super Duty Power Stroke diesel 6.0 engine, approx. 131,000 miles, rig and truck recently serviced with new oil and ...

1977 SPEEDSTAR SS15-III DRILL RIG #9337T

Manufactured 1977, LeRoi 256-S2 450/250 air compressor, 4 x 4 x 13 centrifugal pump (he uses for drilling), mounted on 1977 GMC 9500 truck with 290 Cummins engine, PTO, rod box, leveling jacks, no carousel, 300’ ...

1997 INGERSOLL-RAND DML1200

• Manufacturer: Ingersoll Rand
• Model: DM-L 1200
• Hours: 1,355 hour

1997 Ingersoll-Rand DML-LP 1200 S/N 7302 Cummins, A/C cab, 35 ft mast, 30 ft drill stem, dust collector, carousel, auto rod changer, 1200 cfm x 110 psi air comp, hyd stabilizers, fire suppression, fast fuel Just ...

1997 INGERSOLL-RAND DMLXL1200

• Manufacturer: Ingersoll Rand
• Model: DM-L XL1200
• Hours: 984 hour

1997 INGERSOLL-RAND DMLXL1200 S/N 7239 CUMMINS ENGINE N14 IN-LINE 6 CYLINDER DIESEL WE HAVE BEEN DOING A LOT OF REPAIR ON THIS DRILL CHANGING POSSIBLY 20 HOSES IT SOUND PEFECT. WE HAVE SPEND APPROX 70,000 ON IT I...

Ingersoll Rand DM-45 Drilling Rig

• Manufacturer: Ingersoll Rand
• Model: DM-45

Good condition Ingersoll Rand DM-45 Drilling Rigs available between 1993 and 1998 years. Located in USA and other countries. Click request price for more information.