Used Drilling Rigs

2024 SOOSAN JD1400E-II

• Manufacturer: Soosan

2023 Year – JD1400EII Rock CommanderHandles a 14’ft lead rod and changes 12’ft thereafter. Carries 86’ft of drill steel onboard. New Features: Operator Comfort – Enlarged operators cabin with movable drill contro...

INGERSOLL-RAND ECM350

• Manufacturer: Ingersoll Rand
• Model: ECM-350
• Drilling depth: 4.356 meter
• Mast Height: 5.753 meter

2.5 – 3.5 Inch Class VL140 Drifter Comes with 3 Air Compressors This is a Complete Drill Package with 3 Ingersoll-Rand Portable Air Compressors

2007 ATLAS COPCO ECM720

• Manufacturer: Atlas-Copco
• Model: ECM 720
• Horsepower: 384.8733394981728 horsepower
• Drilling depth: 29.5 meter

Montabert HC200A Drifter – ‘0’ hours on fresh service CAT Engine Set up for 60mm drill steel Onboard Air of 480 CFM @ 150 PSI 5500 total frame hours 2012 percussion hours w/ ‘0’ hours on new service. PRICED TO SE...

1998 GARDNER-DENVER 300

• Manufacturer: Gardner Denver

3.5” – 4.5” Inch Class CAT 3126 Diesel Engine Self-Contained Hydraulic Drill HPR1H Hydraulic Drifter New Injection Pump 2017 Handles a 20’ft starter steel Set up for T45 Low frame Hours Extendable Boom Dust Colle...

1999 CME 45C AUGER DRILL RIG #3298Tc

Manufactured 1999, 3 cyl 57 hp Duetz air cooled diesel engine, 2 winches, cathead, 140 # CME auto hammer, Moyno 3L6 pump, slide base, 300 gal water tank, front winch, toolbox mounted on 1995 Markooka MST 1100, 24...

1991 MOBILE B-57 AUGER DRILL RIG #8195T

Manufactured 1991, gas deck engine, 250 gal water tank, cathead, in/out and side to side slide base, no pump, no autohammer, mounted on 1995 Ford F700 single axle truck (not 4 x 4) with gas engine Price: $39,500

CYCLONE 36R DRILL RIG AND GROUT PUMP #9878R

Mounted on 1985 International Paystar 5000 all wheel drive, 672 Detroit diesel deck engine, 6 cylinder air compressor, 3 x 2 Mission Magnum pump, includes bits, stabilizers, hole opener, trailer mounted grout pum...

2003 SANDVIK D55SP

• Manufacturer: Sandvik

DTH Class 3508 Cat Engine Single Pass Unit Currently using a 8” DTH Hammer with a 9” Bit Equipped w/ ( 2 ) 6 ½” x 25 ft. Drill Pipe w/ 8” DTH Hammer Dust Collector Mast 73’ Long, U/C 85% – Excellent condition. Un...

2014 ATLAS COPCO FLEXIROC T45-10

• Manufacturer: Atlas-Copco
• Model: FLEXIROC T45
• Horsepower: 225 horsepower

2014 Year – Atlas Copco FlexiRoc T45-10 Powered by a Caterpillar C9.3 Diesel Engine472 CFM @ 174 PSI onboard Air Compressor COP3060 Drifter 13,219 Total Hours 4,922 Percussion Hours Set up for T51 (51mm) Drill St...

2021 Furukawa HCR1450-EDII

• Manufacturer: Furukawa
• Model: HCR1450EDII
• Horsepower: 260.15828523569866 horsepower
• Machine weight: 16,460 kilogram

Unit has 2,231 total hours & 1,068 percussion hours. Set up for T51 drill steel. HD828S drifter Excellent condition.

1996 INGERSOLL-RAND CM695D

• Manufacturer: Ingersoll Rand
• Model: CM-695D
• Horsepower: 309.77610252291953 horsepower

DTH Class Four (4) Machines for the PRICE OF ONE! Being Sold as a Complete Pkg. Only QTY. 4 – CM695D $85,000 Buys the Package CAT 3306 Diesel Engines HIGH Pressure IR Air Compressors for DTH Drilling (Qty. 1) – F...

1992 CME 75HT AUGER DRILL RIG #10533Tb

Manufactured 1992, mounted on 2018 Peterbuilt 337 truck with automatic transmission, 3 winch lines, wiggle tail, 25’ mast, Moyno 3L8 pump, breakout wrench, Cummins 6B (rebuilt 2021) Price: $225,000 CME 75HT

2014 CME 550X BUGGY DRILL RIG #863T

Manufactured 2014, approx 4720 hours, Cummins diesel engine, manual transmission, (3) winches (3200 lb, 7000 lb, 3200 lb), Moyno 3L8 pump, 140 lb auto drop hammer, rod clamp, breakout wrench, auger racks, rod sto...

2022 DIEDRICH D50 AUGER DRILL RIG #3388T

• Manufacturer: Diedrich

Manufactured 2022 (delivered 2023), John Deere 4-cyl engine, (3) winches plus wireline wince, 3L6 Moyno pump, SPT hammer, breakout, 120 gal water tank, mounted on rubber track carrier, remote control, fold down w...

2007 ATLAS COPCO ECM720

• Manufacturer: Atlas-Copco
• Model: ECM 720
• Horsepower: 384.8733394981728 horsepower
• Drilling depth: 29.5 meter

4.5” – 5.5” Inch Class CAT C11 Diesel Engine HC200A Drifter set up for GT60 Rods Caterpillar C11 Diesel Engine Montabert HC200A drifter. Recent new hydraulic Pump Aprox. 11800 total frame hours Unit is set up for...

Ingersoll Rand DM-45 Drilling Rig

• Manufacturer: Ingersoll Rand
• Model: DM-45

Good condition Ingersoll Rand DM-45 Drilling Rigs available between 1993 and 1998 years. Located in USA and other countries. Click request price for more information.