Used Processing in Hiroshima, Japan

Turbo blower

• used

• Manufacturer: Mitsui blower

SUS without motor 200m3 / min Where to use: Chemical plant Food plant Feed and fertilizer plant Environmental recycling plant Crushed stone plant Water treatment plant

Hitachi VB-110-E2

• used

• Manufacturer: Hitachi

Air volume: 11.5m3 / min (60HZ) Static pressure: 29.4kPa SUS operation confirmed operation with operation panel

2000 Mitsui Seiki Z756WSH type

• used

• Manufacturer: Mitsui Seiki

Screw compressor Power: 75KW Voltage: 3300V 60HZ With reactor board Operating time: 31320H Pressure: 0.69Mpa

Air tank

• used

Manufacturer: Seller: Hitachi, Ltd. (Tokiko) With safety valve and air gauge

350m2 gas cooler

• used

Multitubular heat exchanger

• used

Where to use: Chemical factory Food factory | Heat transfer area: 2m2 SUS

1993 Izumi Food Machinery NB13SR-001-7-W type

• used

• Manufacturer: Izumi

Product side flow rate: 800L / Hr 100 ℃ → 50 ℃ Bore size: 25A Cooling water side: 6000L / Hr 38 ℃ ← 32 ℃ Bore: 40A Material: SUS317L (plate) Packing: NBR Please see the PDF below for specifications.

1993 Izumi Food Machinery NB13SR-001-7-W type

• used

• Manufacturer: Izumi

Product side flow rate: 800L / Hr 100 ℃ → 50 ℃ Bore size: 25A Cooling water side: 6000L / Hr 38 ℃ ← 32 ℃ Bore: 40A Material: SUS317L (plate) Packing: NBR Please see the PDF below for specifications.

1990 Plate heat exchanger

• used

• Manufacturer: Hisaka Seisakusho

Where to use: Chemical factory Food factory Environmental recycling factory Water treatment plant | Heat transfer area: 75m2 SUS pressure leak tested, as-is

1989 Hisaka Model UX-016-J-36

• used

• Manufacturer: Hisaka

Heat transfer area: 3m2 Design pressure: 5kgf / c㎡

SM30D type made by Kanto Blender

• used

• Manufacturer: Made by Kanto Blender

Full volume: 30L SUS container electric lifting type touch panel type Operation confirmed Blade: Whipper only

Hokos NP-20D special model

• used

• Manufacturer: Made by hocos

Pulse jet type Filtration area: investigating | Electric motor: 0.75KW 200V 50HZ | Material: Made in SUS

2006 GL receiver

• used

• Manufacturer: Made of Ikebukuro enamel

Total volume: 2000L Design pressure: 0.3MPaG Design temperature: About 50 ℃ No repair history.

Hot air dryer (current dryer)

• used

• Manufacturer: Made by Tsutsuyoshi

With blower, feeder and operation panel With electric circuit diagram Application (Drying of powder, granule, etc.) Confirmed that the main operation panel is energized.

Liquid agitator

• used

Material: Made of SUS Total volume: 500L With stirring device For liquids Detailed investigation