Used Tanks & Kettles in Bremen, Germany

19499 liter tank, Aisi 316

remarks: 3 loose bearing shells made of Fe (galvanized); 1 manhole appr. 300 x 395 mm in the front floor; reinforcement ring made of mild steel around the outside of the cylinder

15500 liter tank, Aisi 304

remarks: bearing shells cut-off below; 1 manhole diameter 430 mm in the front bottom; former connections welded closed

5000 liter standing pressure tank, Aisi316

• Manufacturer: Becker Tanks

max. allowable working temperature: 50 °C Volume: 5.000 liter | Max. excess pressure: 5,0 bar | Stand type: legs height adjustable | Quantity legs: 4 Piece | Diameter inside: 1.793 mm | Cylindrical height: 1.500 ...

8000 liter tank, Aisi 304

remarks: pipelines inside the tanks; in the case of one tank the outlet is cut off; the other tank was re-welded in several places on the central cylinder weld

5400 liter tank, Aisi 304

remarks: Manhole approx. 295 x 395 mm; the outlet extension of 1 tank is cut off (loosely enclosed); another tank with 1 dent in the transition from the cylinder to the upper bottom (see photos)

1000 liter tank, Aisi 304

remarks: metallic discolourations inside; 1 tank with baffles inside

2000 liter tank, Aisi 304

notice: some residues of previous content, bump at the insulation jacket remarks: slight differences in design (connectors); diameter manhole 490 mm; former connectors were welded closed by the former operator; t...

1400 liter tank, Aisi 304

notice: some residues of previous content, scratches inside remarks: Manhole appr. 300 x 440 mm; Level indicator incomplete; Butterfly valve screwed to the outlet (for 1 tank DN 50, for the other tank DN 40); 1 l...

1000 Liter tank, Aisi 316

• Manufacturer: Waldner

remarks: Tanks are slightly out of round due to their design; tanks with small (sometimes slightly larger) dents; some of the tank feet are pressed into the lower bottom; tank lids are made of plastic (2 containe...

500 liter tank, Aisi 304

remarks: Slight differences in the design of the tanks; tanks slightly out of round and with smaller dents; tanks do not have a bottom outlet; Feet partly slightly bent; One of the lids has 1 round sheet metal cu...

500 liter tank, Aisi 304

remarks: Tank slightly out of round; Parts of the butterfly valve are lower than the lower bottom (take this into account when setting up the tank); outlet slightly curved upwards; Tank with dents in the transiti...

300 liter tank, Aisi 304

remarks: Tanks slightly out of round (caps do not fit completely on the tanks; 1 x cap knob is missing); Outlet with screwed-on tap (internal diameter of pipe approx. 12 mm); Tank 1: 1 connection is pressed into ...

6000 liter tank, Aisi 304

• Manufacturer: Ritter (HBB Hildesheimer Behälterbau)

remarks: Manhole diameter 420 mm; 1 tank slightly lower in total height; Butterfly valves of the outlets defective; Various pipes on the tanks (mostly cut off)

9500 liter tank, Aisi 304

remarks: 5 loose plug-in feet made of Fe; manhole approx. 320 x 420 mm; stronger adhesions inside the tanks; 1 tank with dents in the upper bottom; the hand lever of the butterfly valve is missing on 1 tank

1000 liter tank, Aisi 304

remarks: Manhole diameter approx. 440 mm (manhole cover is loose); tank with small dents