Test, Lab, Medical equipment » Test Generators

Search By Manufacturer

Search By Country

Building Filters

1731

Used controller

  • Agilent/Keysight Y1800A

    Agilent/Keysight Y1800A

    • Manufacturer: Agilent - Keysight

    The RF transceiver kit consists of a transmitter unit and a receiver unit in super heterodyne architecture. The transceiver units are made up of various RF building-block modules such as filter, low noise amplifi...

    Farmingdale, NJ
  • Agilent/Keysight 3785A

    Agilent/Keysight 3785A

    • Manufacturer: Agilent - Keysight
    • Model: 3785A

    The Keysight / Agilent / HP 3785A Jitter Generator and Receiver is a dedicated jitter measurement system for testing and evaluating the performance of CEPT or Bell digital transmission terminal and link equipment...

    Farmingdale, NJ
  • Agilent/Keysight E2507B

    Agilent/Keysight E2507B

    • Manufacturer: Agilent - Keysight
    • Model: E2507B

    The Agilent E2507B multi-format communications signal simulator creates multiple, simultaneous signals with complete control of all the parameters of each signal. This capability allows you to create the multi-ch...

    Farmingdale, NJ
  • Trusted Seller
    Krohn-Hite 1200A

    Krohn-Hite 1200A

    • Manufacturer: Krohn-Hite
    • Frequency range: 0.0 GHz

    Waveforms: Sine, Square, Triangle Linear Sweep: Range, 1500:1, up or down; duration adjustable 1000s to 1ms. Main Output: 20Vp-p, open circuit; simultaneous LO (–20dB) output. Variable DC Offset: ±10V. External V...

    New Smyrna Beach, FL
  • Tektronix CG5001-01

    Tektronix CG5001-01

    • Manufacturer: Tektronix
    • Model: CG5001-01

    The CG5001 Programmable Calibration Generator features a wide range of functions, all programmable by controller via the GPIB. A "Learn" mode allows any manually set function or range to be acquired by a controll...

    $2,624 USD
    Farmingdale, NJ
  • Tektronix FG502

    Tektronix FG502

    • Manufacturer: Tektronix
    • Model: FG502

    The FG 502 Function Generator provides low-distortion sine, square, and triangle waveforms, and positive or negative ramps and pulses. Output frequency is continuously variable from 0.1 Hz to 11 MHz. The high-fre...

    Farmingdale, NJ
  • Trusted Seller
    PAR 5208

    PAR 5208

    • Manufacturer: Par

    5 Hz to 200 kHz Dual Phase Lock-In Amplifier The 5208 Lock-in Amplifier provides the ability to recover amplitude and phase information from noisy and low level signals between 5 Hz (0.5 Hz optional) to 200 kHz. ...

    Cary, NC
  • Trusted Seller
    LeCroy PXA125

    LeCroy PXA125

    • Manufacturer: Lecroy
    • Model: PXA125

    125 MS/s clock 14-bit vertical resolution 2 Meg memory depth 1ppm clock stability 10-digits sample clock frequency PXI Form Factor single slot Multiple instrument synchronization Ultra fast waveform downloads usi...

    New Smyrna Beach, FL
  • Trusted Seller
    Wiltron 6647A

    Wiltron 6647A

    • Manufacturer: Wiltron
    • Model: 6647A

    10 MHz to 18.6 GHz Programmable Sweep Generator The Wiltron 6647A Sweep Generator is a high performance, programmable sweep generator. All front panel controls are accessible via GP-IB (optional). Excellent signa...

    Cary, NC
  • Tektronix AWG7122B

    Tektronix AWG7122B

    • Manufacturer: Tektronix
    • Model: AWG7122B

    The AWG7122B is a 3.5 GHz arbitrary waveform generator from Tektronix. Features: 12 GS/s (24 GS/s) and 6 GS/s Models 9.6 GHz Effective RF Frequency Output 1 or 2 Arbitrary Waveform Outputs Accurate Timing with on...

    $28,298 USD

    Get financing

    Est. $533/mo

    Farmingdale, NJ
  • Trusted Seller
    WAVETEK PROGRAMMABLE SIGNAL SOURCE MODEL

    WAVETEK PROGRAMMABLE SIGNAL SOURCE MODEL 172B

    • Manufacturer: Wavetek
    • Model: 172B

    “NOT TESTED” WAVETEK PROGRAMMABLE SIGNAL SOURCE MODEL 172B 001 DISPLAY AND CONTROL FRONT PANEL 4LB 18X4X6 CR-28444-SC3 Y-5-(1)-E

    $200 USD
    Coffeyville, KS
  • Trusted Seller
    Agilent 3499C

    Agilent 3499C

    • Manufacturer: Agilent - Keysight
    • Model: 3499
    • Frequency range: 0.02 GHz

    Agilent Switch Control System Chassis

    Magnolia, TX
  • Xcom IQC5040A.002

    Xcom IQC5040A.002

    • Manufacturer: Xcom

    Signal recorder with up to 40 MHz record bandwidth. Two each LVDS inputs (I & Q) with a maximum data rate per connector of 100 MB/sec. Includes an IQC5000B-MEM interface module, removable AC power supply, X-COM C...

    $995 USD
    Farmingdale, NJ
  • Agilent/Keysight 5359A

    Agilent/Keysight 5359A

    • Manufacturer: Agilent - Keysight
    • Model: 5359A

    The Agilent 5359A time synthesizer produces two extremely precise low-jitter time delays. These delays, Td and Tw, are individually selectable from the keyboard. Step values of 50 ps or greater set these delays a...

    $2,997 USD
    Farmingdale, NJ
  • Tektronix PG3A-64M^

    Tektronix PG3A-64M^

    • Manufacturer: Tektronix
    • Model: PG3A

    Starting with Serial number P01233, units are field-upgradable to a larger memory size. For units with Serial Number P01233 and greater, they can be upgraded with option PG3A-64M to ~64MVectors of memory. The pat...

    $2,867 USD
    Farmingdale, NJ
1920212223

Overview

Test generators are specialized machines used to simulate electrical loads for testing and verifying the functionality of electrical systems and equipment. They are essential in industries like manufacturing, research, and development, ensuring that devices meet performance standards and safety regulations before deployment.

FAQ

What should I look for when buying a used test generator?

Check the generator's age, usage history, and overall condition. Ensure it has been regularly maintained and verify that it meets the specific testing requirements for your applications.

How can I ensure safe shipping for a test generator?

Use a reliable shipping company with experience in handling sensitive electrical equipment. Make sure the generator is properly packaged and secured to prevent any damage during transit.

What maintenance is required for a test generator?

Regular maintenance includes inspecting electrical connections, checking for component wear and tear, and performing calibration checks. Refer to the manufacturer's manual for specific maintenance guidelines and intervals.