Test, Lab, Medical equipment » Test Generators

Search By Manufacturer

Search By Country

Building Filters

2321

Used function generator

  • Trusted Seller
    GW Instek GFG-8217A

    GW Instek GFG-8217A

    • Manufacturer: GW Instek
    • Model: GFG-8217A

    Signal/Function Generator,3MHz -20dBx2 Frequency range max.: 3.0MHz | Waveform outputs: Sine, Triangle, Square, CMOS, TTL, VCF | Modulation: Sweep

    New Smyrna Beach, FL
  • Trusted Seller
    Tektronix AFG3011

    Tektronix AFG3011

    • Manufacturer: Tektronix
    • Model: AFG3011

    10 MHz, 25 MHz, 100 MHz, or 240 MHz Sine Waveforms 14 bits, 250 MS/s, 1 GS/s, or 2 GS/s Arbitrary Waveforms Amplitude up to 20 Vp-p into 50 Ω loads 5.6" Display for Full Confidence in Settings and Waveform Shape ...

    New Smyrna Beach, FL
  • Trusted Seller
    Tektronix FG503

    Tektronix FG503

    • Manufacturer: Tektronix
    • Model: FG503

    1 Hz to 3 MHz Three waveforms Up to 20 Vp-p output Up to +-7.5 V offset VCF Function Generator

    New Smyrna Beach, FL
  • Trusted Seller
    Keysight / Agilent / HP

    Keysight / Agilent / HP 3311A

    • Manufacturer: Agilent - Keysight
    • Model: 3311A

    Seven ranges from 0.1 MHz to 1 MHz. Features sine, square, triangle, positive pulse, with an output of 10 Vp-p. Function Generator

    New Smyrna Beach, FL
  • Trusted Seller
    Kenwood FG-281

    Kenwood FG-281

    • Manufacturer: Kenwood

    Generates　Sine‚ Triangle‚ Square‚ Pulse‚ Ramp wave and DC. 50ppm High Frequency Accuracy with Direct Digital Synthesizer Amplitude and Frequency display with Vacuum Fluorescent Display. Ten-key setting for amplit...

    New Smyrna Beach, FL
  • Tektronix YBT1

    Tektronix YBT1

    • Manufacturer: Tektronix

    The NetTek YBT1 T1 Circuit Tester is part of the NetTek BTS Field Tool family: a high-performance, portable, field-ready tester, optimized for rapid troubleshooting and base station performance verification. The ...

    Farmingdale, NJ
  • Trusted Seller
    Keysight / Agilent / HP

    Keysight / Agilent / HP 8116A

    • Manufacturer: Agilent - Keysight
    • Model: 8116A

    Sine, triangle, haverfunctions and DC 1mHz - 50MHz, 32Vpp for all waveforms Variable(10ns min) pulse width, 6ns transitions Modulation Self-prompting operating concept Error recognition and self test Function Gen...

    New Smyrna Beach, FL
  • Trusted Seller
    Wavetek 185

    Wavetek 185

    • Manufacturer: Wavetek
    • Model: 185

    Frequency range of 0.0001Hz to 5MHz (10 ranges). Sine, triangle, square, positive pulse, negative pulse Operating modes: Continuous, triggered, gated, sweep Dial accuracy: ±2% Function Generator

    New Smyrna Beach, FL
  • Trusted Seller
    Protek B801

    Protek B801

    • Manufacturer: Protek

    Seven frequency ranges with 100:1 control on each range Less than 2% sinewave distortion Variable symmetry DC offset and Voltage Controlled Frequency input TTL sync output Sweep Function Generator

    New Smyrna Beach, FL
  • Trusted Seller
    Tektronix CFG253

    Tektronix CFG253

    • Manufacturer: Tektronix
    • Model: CFG253

    0.03 Hz to 3 MHz Square, Triangle and Sine Waves; TTL Output 20 dB Attenuator Internal or External Frequency Sweep Variable Duty Cycle Variable Symmetry (20 to 80%) Function generator

    New Smyrna Beach, FL
  • Trusted Seller
    Hameg Instruments HM8131- 2

    Hameg Instruments HM8131- 2

    • Manufacturer: Hameg

    Frequency Range: 100µHz to 15 MHz 6 Standard Signal Forms and Arbitrary Mode n Memory Card for Signal Registration Linear & Logarithmic Sweep Mode RS-232 Interface included as Standard Function Generator

    New Smyrna Beach, FL
  • Trusted Seller
    Keysight / Agilent / HP

    Keysight / Agilent / HP 3314A

    • Manufacturer: Agilent - Keysight
    • Model: 3314A

    Range: 0.001 Hz to 20 MHz Frequency Accuracy 0.05 % Minimum Output Voltage 0 V Maximum Output Voltage 10 V Output Impedance 50 Ohm Modulation AM,FM Sweep Modes Linear,Log,Manual Trigger Modes Burst,Gate Function ...

    New Smyrna Beach, FL
  • Trusted Seller
    GW Instek GFG-8020H

    GW Instek GFG-8020H

    • Manufacturer: GW Instek
    • Model: GFG-8020H

    Frequency Range0.2Hz ~ 2MHz Coarse and Fine tuning Sine, Triangle, Square, TTL pulse and CMOS Output Built-in 4 Digit Counter (INT only) Large 0.5" LED Display Variable DC offset control Output Overload protectio...

    New Smyrna Beach, FL
  • Trusted Seller
    Tektronix AFG3102

    Tektronix AFG3102

    • Manufacturer: Tektronix
    • Model: AFG3102

    5.6" Display for Full Confidence in Settings and Waveform Shape Multi-language and Intuitive Operation Saves Set-up Time Pulse Waveform with Variable Edge Times USB Connector on Front Panel for Waveform Storage o...

    New Smyrna Beach, FL
  • Trusted Seller
    Tektronix AFG3252

    Tektronix AFG3252

    • Manufacturer: Tektronix
    • Model: AFG3252

    5.6" Display for Full Confidence in Settings and Waveform Shape Multi-language and Intuitive Operation Saves Set-up Time Pulse Waveform with Variable Edge Times USB Connector on Front Panel for Waveform Storage o...

    New Smyrna Beach, FL
1819202122

Overview

Test generators are specialized machines used to simulate electrical loads for testing and verifying the functionality of electrical systems and equipment. They are essential in industries like manufacturing, research, and development, ensuring that devices meet performance standards and safety regulations before deployment.

FAQ

What should I look for when buying a used test generator?

Check the generator's age, usage history, and overall condition. Ensure it has been regularly maintained and verify that it meets the specific testing requirements for your applications.

How can I ensure safe shipping for a test generator?

Use a reliable shipping company with experience in handling sensitive electrical equipment. Make sure the generator is properly packaged and secured to prevent any damage during transit.

What maintenance is required for a test generator?

Regular maintenance includes inspecting electrical connections, checking for component wear and tear, and performing calibration checks. Refer to the manufacturer's manual for specific maintenance guidelines and intervals.