Test, Lab, Medical equipment » Test Generators » Massachusetts

Building Filters

23

Used pulse function generator in Massachusetts, USA

  • Tektronix PFG5105

    Tektronix PFG5105

    • Manufacturer: Tektronix
    • Model: PFG5105

    This Generator performes using a Tektronix PFG5105 programmable pulse/function generator with a Trek 20/20 amplifier (20KV). To protect the amplifier from current overload, an 18M resistor was added in series to ...

    Webster, MA
  • Tektronix DTGM20

    Tektronix DTGM20

    • Manufacturer: Tektronix
    • Model: DTGM20

    This is an Output Module that can be used with the DTG5000 mainframe. These modules can be used in any combination and in any slot. They are functional differences between slot A though slot D and slot E though s...

    Webster, MA
  • Tektronix RG501

    Tektronix RG501

    • Manufacturer: Tektronix
    • Model: RG501

    Ramp Generator Module The Tektronix RG501 is a Ramp Generator Module. This module is used in the TM500-Series Power Units. It is suited to sweep the VCF or VCO inputs of most function generators. The RG501 has ...

    Webster, MA
  • Agilent 81150A

    Agilent 81150A

    • Manufacturer: Agilent - Keysight
    • Model: 81150A

    The Agilent/Keysight Technologies 81150A Pulse Function Arbitrary Noise Generator, 1 µHz to 120 MHz/1 µHz to 240 MHz, Refurbished sets the standard for the next generation of lab: for fast, accurate insight into ...

    $13,995 USD

    Get financing

    Est. $275/mo

    Woburn, MA
  • Agilent 8116A-001

    Agilent 8116A-001

    • Manufacturer: Agilent - Keysight
    • Model: 8116A

    The fully programmable Agilent / HP 8116A features pulse as well as function generator capabilities in one small unit. A broad 1 mHz to 50 MHz band for all waveforms and a wide choice of operating and modulating ...

    $995 USD
    Woburn, MA
  • Tektronix FG504

    Tektronix FG504

    • Manufacturer: Tektronix
    • Model: FG504

    This Generator provides low distortion sine, square, triangle, ramp, and pulse wave forms over the frequencies from 0.001Hz to 40MHz in ten decades. This unit may be swept between the START and STOP FREQ. dial se...

    Webster, MA
  • Tektronix FG501

    Tektronix FG501

    • Manufacturer: Tektronix
    • Model: FG501

    The Tektronix FG501 is a Function Generator. The RG501 is intended to be used in any of the TM-Series power supplies, like the TM503. The frequency is adjusted by a decade switch for ranges and dial for X1 to X1...

    Webster, MA
  • Tektronix AFG3251

    Tektronix AFG3251

    • Manufacturer: Tektronix
    • Model: AFG3251

    25 MHz, 100 MHz or 240 MHz Sine Waveforms 14 bits, 250 MS/s, 1 GS/s, or 2 GS/s Arbitrary Waveforms 5.6" Display for Full Confidence in Settings and Waveform Shape Multi-language and Intuitive Operation Saves Set-...

    Webster, MA
  • Tektronix FG5010

    Tektronix FG5010

    • Manufacturer: Tektronix
    • Model: FG5010

    The Tektronix FG5010 is a Function Generator that is designed to operate in a TM 5000-Series Power Module. This unit covers the frequency range from 0.002Hz to 20MHz and offers an output to 20 Vp-p from 50-ohms. ...

    Webster, MA
  • Tektronix FG502

    Tektronix FG502

    • Manufacturer: Tektronix
    • Model: FG502

    Low distortion sine Square, triangle, positive and negative pulse and ramp waveforms Frequency range from 0.1 Hz to 11 MHz A voltage controlled frequency (VCF) controls the output frequency from an external source

    Webster, MA
  • Fluke 39A

    Fluke 39A

    • Manufacturer: Fluke
    • Model: 39A

    Arbitrary, Pulse, DC Offset Frequency range: 100.0uHz to 16.0MHz | Freq. resolution: 0 | Waveform outputs: Sine, Square, Triangle, Ramp, | Modulation: AM, Sweep, Burst, Trigger | Number of channels: 1 | Resolutio...

    Webster, MA
  • Tektronix AFG3022

    Tektronix AFG3022

    • Manufacturer: Tektronix
    • Model: AFG3022

    The Tektronix AFG3022 is a Factory Arbitrary Function Generator with 2 Channels and has a bandwidth of 25 MHz. The AFG3000 Arbitrary/Function Generator Series, has a large color display and an intuitive user inte...

    Webster, MA
  • Tektronix AFG3101

    Tektronix AFG3101

    • Manufacturer: Tektronix
    • Model: AFG3101

    25 MHz, 100 MHz or 240 MHz Sine Waveforms 14 bits, 250 MS/s, 1 GS/s, or 2 GS/s Arbitrary Waveforms 5.6" Display for Full Confidence in Settings and Waveform Shape Multi-language and Intuitive Operation Saves Set-...

    Webster, MA
  • Agilent 8111A-001

    Agilent 8111A-001

    • Manufacturer: Agilent - Keysight
    • Model: 8111A

    HP 8111A combines pulse generator and function generator capabilities in a single, compact unit. Triggered operation for all waveforms, and the ability to define rectangular waveforms in terms of pulse width or d...

    $1,195 USD
    Woburn, MA
  • Agilent 8111A

    Agilent 8111A

    • Manufacturer: Agilent - Keysight
    • Model: 8111A

    HP 8111A combines pulse generator and function generator capabilities in a single, compact unit. Triggered operation for all waveforms, and the ability to define rectangular waveforms in terms of pulse width or d...

    $525 USD
    Woburn, MA
12

Overview

Test generators are specialized machines used to simulate electrical loads for testing and verifying the functionality of electrical systems and equipment. They are essential in industries like manufacturing, research, and development, ensuring that devices meet performance standards and safety regulations before deployment.

FAQ

What should I look for when buying a used test generator?

Check the generator's age, usage history, and overall condition. Ensure it has been regularly maintained and verify that it meets the specific testing requirements for your applications.

How can I ensure safe shipping for a test generator?

Use a reliable shipping company with experience in handling sensitive electrical equipment. Make sure the generator is properly packaged and secured to prevent any damage during transit.

What maintenance is required for a test generator?

Regular maintenance includes inspecting electrical connections, checking for component wear and tear, and performing calibration checks. Refer to the manufacturer's manual for specific maintenance guidelines and intervals.