Test, Lab, Medical equipment » Test Generators » Florida

Building Filters

283

Used 00 in Florida, USA

  • Trusted Seller
    Fluke PM 5139/00n

    Fluke PM 5139/00n

    • Manufacturer: Fluke
    • Model: PM5139
    • Frequency range: 0.02 GHz

    20 MHz Programmable Function Generator Frequency range max.: 20.0MHz | Waveform outputs: Sine, Pulse, Triangle, Sawtooth | Modulation: AM, FM, PSK, Burst, Sweep

    New Smyrna Beach, FL
  • Trusted Seller
    Anritsu MG724E1

    Anritsu MG724E1

    • Manufacturer: Anritsu
    • Model: MG724E1
    • Frequency range: 13 GHz

    High signal purity High frequency stability Wide output level range Low price Small and lightweight Signal Generator 6.3 to 7.8 GHz Custom-made

    New Smyrna Beach, FL
  • Trusted Seller
    Anritsu MG724G1

    Anritsu MG724G1

    • Manufacturer: Anritsu
    • Model: MG724
    • Frequency range: 13 GHz

    High signal purity High frequency stability Wide output level range Low price Small and lightweight Signal Generator 12 to 13 GHz Custom-made

    New Smyrna Beach, FL
  • Trusted Seller
    GW Instek GRG-450B

    GW Instek GRG-450B

    • Manufacturer: GW Instek
    • Model: GRG-450B
    • Frequency range: 0.15 GHz

    Frequency Range from 100kHz ~ 150MHz (up ~ 450MHz on Harmonics) Int/Ext AM Modulation, 0 ~ 100% Frequency Monitor Output for EXT Frequency Counter Accuracy +5% Level 100mVrms approx up to 35MHz Level control -H...

    New Smyrna Beach, FL
  • Trusted Seller
    Keysight / Agilent / HP

    Keysight / Agilent / HP 8350B

    • Manufacturer: Agilent - Keysight
    • Model: 8350B
    • Frequency range: 40 GHz

    Broadband frequency coverage High output power Low harmonics Five frequency markers Agilent-IB control of all Agilent 8350B mainframe functions, and all Agilent 83500 series plug-in functions Sweep Oscillator Mai...

    New Smyrna Beach, FL
  • Trusted Seller
    Tektronix SG5030

    Tektronix SG5030

    • Manufacturer: Tektronix
    • Model: SG5030
    • Frequency range: 0.55 GHz

    0.1 Hz to 550 MHz frequency range 4.5 mV to 5.5 V amplitude range Amplitude flatness from +-1.5 to 4% of 50 KHz reference Synthesized frequency accuracy 20 stored front-panel settings capability with non-volatile...

    New Smyrna Beach, FL
  • Trusted Seller
    Anritsu MG3700A

    Anritsu MG3700A

    • Manufacturer: Anritsu
    • Model: MG3700A
    • Frequency range: 6 GHz

    Frequency Range 250 kHz to 6 GHz Wide vector modulation bandwidth 150 MHz High level accuracy High speed waveform transmission by 100BASE-TX Ethernet 40 GB hard disk is built in Large capacity baseband memory Sup...

    New Smyrna Beach, FL
  • Trusted Seller
    Advantest D3286

    Advantest D3286

    • Manufacturer: Advantest
    • Model: D3286

    SDH/SONET Frame Synchronization Suitable for SystemEvaluation Burst Data Measurement Effective for Round-Trip Testing Error Location Function to Locate Error Bits Error Rate Measurement Function with Area Specifi...

    New Smyrna Beach, FL
  • Trusted Seller
    Krohn-Hite 3800

    Krohn-Hite 3800

    • Manufacturer: Krohn-Hite
    • Model: 3800

    1 Hz to 100 kHz frequency range Selectable bandwidths from 0.001 Hz to 1 kHz Locks on and tracks an input signal buried 10 dB below the noise level Slope attenuation of 12 db per octave of bandwidth Four pole But...

    New Smyrna Beach, FL
  • Trusted Seller
    Protek B813

    Protek B813

    • Manufacturer: Protek
    • Frequency range: 0.15 GHz

    100kHz to 150MHz Frequency range. Output to 450MHz is possible using the 3rd harmonic Two position attenuator plus fine control for setting output voltage levels Internal and external modulation Highly stable fre...

    New Smyrna Beach, FL
  • Trusted Seller
    Protek B1990

    Protek B1990

    • Manufacturer: Protek

    1Hz to 10MHz Frequency Range Variable Pulse width and Delay Manual and External triggering Output amplitude to 5V p-p (into 50W) May be crystal controlled 10MHz Pulse Generator

    New Smyrna Beach, FL
  • Trusted Seller
    Rohde & Schwarz AMU200A

    Rohde & Schwarz AMU200A

    • Manufacturer: Rohde & Schwarz
    • Model: AMU200A
    • Frequency range: 0.04 GHz

    Scalable platform Up to two complete baseband paths Configuration as a fading simulator, I/Q source, or all-in-one instrument with fading and signal generation Baseband generators with universal coder for realtim...

    New Smyrna Beach, FL
  • Trusted Seller
    LeCroy PXA125

    LeCroy PXA125

    • Manufacturer: Lecroy
    • Model: PXA125

    125 MS/s clock 14-bit vertical resolution 2 Meg memory depth 1ppm clock stability 10-digits sample clock frequency PXI Form Factor single slot Multiple instrument synchronization Ultra fast waveform downloads usi...

    New Smyrna Beach, FL
  • Trusted Seller
    Krohn-Hite 3200

    Krohn-Hite 3200

    • Manufacturer: Krohn-Hite
    • Model: 3200

    Single channel; freq range: 20Hz to 2MHz; freq accuracy: 5%; HP/LP; output: 3V/10mA RMS Variable Filter

    New Smyrna Beach, FL
  • Trusted Seller
    Wavetek 852

    Wavetek 852

    • Manufacturer: Wavetek
    • Model: 852

    Two identical filter channels High pass and low pass functions 3-digit resolution for cutoff frequency selection 0.1 Hz to 111 kHz frequency 48 dB/octave attenuation slope 0 dB or 20 dB gain Butterworth or Flat D...

    New Smyrna Beach, FL
12345

Overview

Test generators are specialized machines used to simulate electrical loads for testing and verifying the functionality of electrical systems and equipment. They are essential in industries like manufacturing, research, and development, ensuring that devices meet performance standards and safety regulations before deployment.

FAQ

What should I look for when buying a used test generator?

Check the generator's age, usage history, and overall condition. Ensure it has been regularly maintained and verify that it meets the specific testing requirements for your applications.

How can I ensure safe shipping for a test generator?

Use a reliable shipping company with experience in handling sensitive electrical equipment. Make sure the generator is properly packaged and secured to prevent any damage during transit.

What maintenance is required for a test generator?

Regular maintenance includes inspecting electrical connections, checking for component wear and tear, and performing calibration checks. Refer to the manufacturer's manual for specific maintenance guidelines and intervals.