Used Electrical Test Instruments in Dublin, Ireland

Schloder SESD200

Details The Schloder SESD200 ESD Simulator delivers precision electrostatic discharge testing with output voltages up to 16.5kV in air and 9kV in contact mode. It offers single pulse or repeated operation, a pre-...

Rohde & Schwarz ESW8

• Manufacturer: Rohde & Schwarz
• Model: ESW8

Details The Rohde and Schwarz ESW8 is an advanced EMI test receiver supporting frequencies from 2 Hz to 8 GHz, delivering exceptional RF characteristics and fast measurement speed. It complies with CISPR16-1-1, A...

Hipotronics 880PL

Details Hipotronics 880PL 80kV HiPot Test Set The Hipotronics 880PL 80kV HiPot Test Set is an smart solution to DC field testing of cables, terminations, motors, generators and other electrical apparatus. Out...

Schaffner CDN110

• Manufacturer: Teseq - Schaffner

Details The Schaffner CDN110 is a single-phase surge coupling/decoupling network designed for use with the NSG651 High Energy Pulse Generator. It enables coupling of pulses up to 6.6 kV (1.2/50 µs waveform) or su...

Schaffner NSG2025-8

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG2025-8 is a high-end 3-phase fast transient/burst generator capable of generating signals up to 8kV with a maximum burst frequency of 500kHz. It integrates a 30A coupling network and supp...

Schaffner NSG2025-4

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG2025-4 is a high-end three-phase Fast Transient/Burst Generator, delivering up to 4.4kV pulse amplitude with a maximum burst frequency of 1MHz. It integrates a 30A coupling network and su...

Teseq (Schaffner) NSG 5600

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG 5600 is a precision EMC tester that generates synchronized, multi-channel automotive-specific waveforms including voltage dropouts, sinusoidal bursts, dips, ISO/SAE pulses, and mag...

Associated Research 3570D

• Manufacturer: Associated Research

Details The Associated Research 3570D is a 5 kV/12 mA AC and a 6 kV/5 mA DC Hipot/IR Tester with a built-in continuity test for checking basic continuity. The 3570D test Frequency is selectable from 50 to 60 Hz. ...

Schaffner NSG3025

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG3025 Burst Generator offers a pulse amplitude range from 200V to 4.8kV ±10% (open circuit), with burst frequency adjustable between 0.1kHz and 1MHz ±2%. It supports 1 to 255 spikes per pa...

Rohde & Schwarz ESPI3

• Manufacturer: Rohde & Schwarz
• Model: ESPI

Details The Rohde & Schwarz ESPI3 is a 9kHz to 3GHz precompliance test receiver designed for EMI diagnostics across CISPR, EN, ETS, FCC, ANSI C63.4, VCCI, and VDE standards. It features five selectable detectors ...

EMCO 3810/2

• Manufacturer: Emco

Details The Emco 3810/2 Line Impedance Stabilization Network (LISN) is a dual-channel low pass filter engineered to isolate test equipment from external power sources while directing RF signals to a 50-ohm port. ...

Teseq NSG4070C-35

• Manufacturer: Teseq - Schaffner

Details The Teseq NSG4070C-35 Test System For Conducted And Radiated Immunity is a versatile immunity test system designed for precise conducted and radiated immunity testing across various frequency ranges. It s...

EMCO 3115

• Manufacturer: Emco

Details The Emco 3115 Antenna is a linearly polarised broadband double ridged guide antenna covering 1 GHz to 18 GHz. It offers excellent gain, stable VSWR, and supports up to 300 W continuous power with 500 W pe...

Teseq (Schaffner) NSG 3060

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG-3060 is a modular, expandable immunity test system capable of generating surge voltages up to 6.6 kV for overtesting. It integrates IEC and ANSI coupling methods and features a 7″ ...

Teseq NSG3040

• Manufacturer: Teseq - Schaffner
• Model: NSG 3040

Details The Teseq NSG3040 Immunity Test Multifunction Generator is a modular, expandable EMC system designed for high-precision immunity testing. Capable of surge voltages up to 4.4 kV, EFT/Burst up to 4.8 kV, an...