CUT TO LENGTH LINES
used
TEKMAK produces heavy-duty and high-precision Cut-to-Length Lineas and Slitting Lines. CUT-TO-LENGHT Lines Single and Double Levelers Single and Double Stackers Fly and Rotary Shrears Quick Cassette Change Auto C...
Barrie, Canada
1989 AUTOMATIC FEED 76" TRAPEZOID CUT TO LENGTH LINE - UPDATED IN 2020
used
MATERIAL - 0.020" - 0.100" YIELD STRENGTH - 25,000 PSI - 40,000 PSI WIDTH RANGE - 24" - 76" TRIM WIDTH - 74" ID RANGE - 19" - 25" OD RANGE - 36" - 84" LINE SPEED - 300 FPM SHEAR SPM - 18 - 70 SHEAR ANGLE CUTS - 3...
Barrie, Canada- Trusted Seller
Cut-to-Length Line. “Cincinnati-Forte”
used
- Manufacturer: Cincinnati
Cut-to-Length Line. "Cincinnati-Forte. Weight Cap. 42,000 lb. Coil dimensions: Internal Dia.min.-max 15½" - 24″ External Dia. max. 72 " Tolerances Verbatim! Voice of Former Operator of this Cut to Length Line, 3 ...
- Trusted Seller
1981 Ajax Instacut
used
- Manufacturer: Ajax
BAR/ROD SHEAR * VARIABLE SPEED PINCH FEED ROLLS * ADC RACK FEED & BUNDLE DESCRAMBLER (WILL ACCEPT TWO BUNDLES AT ONCE) * FLYWHEEL BRAKE (PNEUMATIC) * LINCOLN CENTRALIZED LUBRICATION * CUT PART EXIT CONVEYOR
Vaughan, Canada - Trusted Seller
1991 MODERN 3LD
used
- Manufacturer: Modern
- Model: 3LD
PIPE-TUBE-BAR CUTOFF MACHINE Capacity: 1/4" TO 3-1/8" O.D. | Maximum wall thickness: 1-1/2" | Maximum solid bar: 3" | Spindle speeds: (16) 130 TO 2012 | Number of slides: 2 | Length of cut run out: 8 | Magazine s...
Vaughan, Canada - Trusted Seller
National
used
- Manufacturer: National
3/4" x 7" * PKO * Trim Capacity: 3/4"X7" | Max wire diameter: 3/4" | Max cuttof diameter: 1" (@85,000 PSI) | Cutoff length range: 1.5" - 10" | Kickout length range: 1.5" - 7" | Max. output: 50ppm | Weight, approx...
Vaughan, Canada 
SMI BSR Tube End Closer
new
- Manufacturer: SMI
BSR The pipe cutter machine uses an orbital blade to cut pipes in coils, without taking away any material, and performing the cut without chips and burr-free. The machine has a powerful pair of tearing clamps, wh...
Toronto, Canada
2023 Schnell Reta Super 16
used
- Manufacturer: Schnell
Cut to length rebar fabrication machine, S/N 0757XXY207 (2023) w/ (2) pay off tables w/ electrical panel w/ 40’ accumulation table and safety enclosure and storage racks (4)
- Trusted SellerAuction
Saskatchewan, CanadaVisit Auction Website 
JK-Kone automatic cut-to-length and slitting multi-coil decoiling system In Quebec, Canada
new
Slitting, cutting and straightening. Adjustable speed max 30 m/min. Digital display for slitting blade positioning.
Canada
Barrie, Canada
“USED” FORSTNER MODEL MST-AL 1250 CUT TO LENGTH SLITTING LINE
used
- DECOILER - SLITTER MST: slitting shafts Ø100mm (4″), 5 pairs of manually adjustable steel knives, manual knife overlapping and manual knife gap adjustment - CONTROL SPS-S1 POTI: easy operation with ergonomic ...
Coquitlam, Canada
Tip: Enter manufacturer, model or keyword
