Used stator

Ross ME100 Emulsifier
- Manufacturer: Ross
Used Ross emulsifier, model ME100, stainless steel construction, 2.5" diameter rotor stator design, driven by 1.5 hp, 230/460 volt motor, on stand. Ross ME100 Emulsifier
Cleveland, OH
Trusted Seller
Granulator/Disintegrator Pulverizer 14.9 kW (20 HP) Stainless Steel Austenitic - IPP# 99495
- Manufacturer: Condux
Traversable cutting mill Number of traversable cutting strips at perimeter 12. Length of traversable strips 400mm. Number of stator strips 4. Length of stator strips 600mm. Sieve area 5600 sq cm. Driven by 15 KW ...
Princeton Junction, NJ
Trusted Seller
25HP Hosokawa Alpine RO Rotoplex Granulator Mill 28/60
- Manufacturer: Alpine
Rotor Knife Rows: Qty. of three, 23.5" wide cross-scissor-cut Stator Knife Rows: Qty. of two 16" X 24" extended height inlet hopper with safety perforated plate. Sizing Screen: 400 sq. inch, Ø1.5mm perforations N...
$19,500 USD
Millwood, WV
Trusted Seller
Granulator/Disintegrator Pulverizer 15 kW (20.1 HP) Stainless Steel Austenitic - IPP# 99496
- Manufacturer: Condux
traversable cutting mill Cutting strips 300mm dia Working width 800mm. Number of cutting strips at perimeter 8 Length of strips 400mm Number of stator strips 2 Length of stator strip 800mm. Sieve area 3800 sq cm....
Princeton Junction, NJ
Trusted Seller
HOSOKAWA ALPINE ROTOPLEX A 80/160 RO
- Manufacturer: Alpine
HOSOKAWA ALPINE Blade mill Type ROTOPLEX A 80/160 RO 8 decks rotor with 5 blades 6 deck stator with 5 blades
Hainesport, NJ
Trusted Seller
DGM DGH500/600
- Manufacturer: DGM
- Model: DGH500
Unused DGM Environmental Technologies model DGH 500/600 granulator. Has approximately 636mm x 615mm feed opening. Unit has (5x2) knives fitted to rotor which measures approximately 500mm diameter x 600mm wide. In...
Hainesport, NJ
Trusted Seller
Granulator/Disintegrator Pulverizer 110 kW (147.5 HP) Carbon Steel - IPP# 705577
- Manufacturer: Pallman
Type PS8-12/6 granulation system 800mm diameter x 1200mm long rotor with 6 removable blades, 6 removable stator knives. Rotor speed 315RPM. With (2) access doors 1280 mm x 650 mm Rotor speed 340 rpm. Feed 1300 mm...
Princeton Junction, NJ
Trusted Seller
2002 TRIA 45-35/CN-SL
- Manufacturer: Tria
Used TRIA model 45-35/CN-SL horizontal cutting granulator. Rotor width 450mm, rotor diameter 350mm, open rotor, number of rotor knives: 3, number of stator knives: 2, cross cut. With hopper, hinged top, motor Sie...
Hainesport, NJ
Trusted Seller
DGM DGH600/800
- Manufacturer: DGM
- Model: DGH600
Unused DGM Environmental Technologies model DGH 600/800 granulator. Has approximately 800mm x 700mm opening with feed hopper that has side opening of 970mm x 770mm. Unit has (5x2) knives fitted to rotor which mea...
Hainesport, NJ
Avian PASG2000 Shredder and G80/120 Granulator System
- Manufacturer: AvianAvian
53442001 Used Avian PASG2000 Shredder and G80/120 Granulator System. SHREDDER SPECS: 2000 mm Rotor Diameter; 6000x1600x1600mm feed hopper; (480) 30mm blades; (1) Shaft; (2) 90kw 415V/50Hz/3P Motors; PLC controls;...
Belvidere, IL
Trusted Seller
2013 Müller AG SM 252 - Granulator
- Manufacturer: Muller
General SKU 445W1538 Location Barneveld Make Müller AG Type SM 252 No. 25213002 Year of construction 2013 Main Features Motor 3 KW Inlet diameter 100 mm Width 250 mm Specified Features - Granulator Material stain...
Barneveld, Netherlands
Trusted Seller
Alpine B25/14 RO #11795
- Manufacturer: Alpine
Rotor width: Cross section approx.250 x 140 Use: Plastic | Rotor diameter: 250 mm | Rotor knives: 3 | Stator knives: 4 row | Motor drive: 5,5 kW
Zuzenhausen, Germany
Trusted Seller
Alpine B 25/14 RO #11796
- Manufacturer: Alpine
Rotor width: Cross section approx.250 x 140 Use: Plastic | Rotor diameter: 250 mm | Rotor knives: 3 | Stator knives: 4 row | Motor drive: 5,5 kW
Zuzenhausen, Germany
Trusted Seller
ZERMA GS 500/800 #12883
- Manufacturer: Zerma
Cross section approx. 500 x 800 mm Use: Plastic | Rotor width: 800 mm | Rotor knives: 5 | Stator knives: 4 row | Motor drive: 45 kW
Zuzenhausen, Germany
Trusted Seller
ZERMA GS 812-7-3
- Manufacturer: Zerma
Antrieb nach Wunsch Cross section approx. 940 x 1154 mm
Zuzenhausen, Germany