Used sensor in Taiwan

Adhesion/Release Tester Confirm to FINAT 4 Standard

• Manufacturer: cometech testing machines

QC-527 test range can do low and high speed peel test and also for 90 ° 、180° multi-angle peel test. Low speed peeling force generally uses 300mm/min to proceed with test, testlow-stick adhesive label tear force....

Drop Weight Impact Tester Confirm to BS EN 1621-1-2012、 BS EN 1621-2-2014 Standard

• Manufacturer: cometech testing machines

This tester is applied on buffer material test with a standard weight of 5kg hammer, drop height is usually 100cm, can produce about 50 joules to hit against test pieces vertically. This tester can read remaining...

QC-501M1F, 502M1F, 503M1F Computerized Tensile (compression) testing machine Confirm to ISO 7500-1, JJG475-88, ASTM E4, DIN5122, JIS B7721/B7733, EN 10002-1, EN 1002-2,BS1610, GB228 Standard

This model is capable for the capacity that above 100KN test. Qualify ASTM、ISO、JIS、GB standard with material and finished product. Use servo motor with high precision reduction mechanism transmission. The structu...

QC-501M2F, 502M2F, 503M2F UNIVERSAL materials testing machine Confirm to ISO 7500-1, ASTM E4 , ASTM D-76, DIN5122 , JIS B7721/B7733 , EN 1002-2, BS1610,GB T228 Standard

This serial model is capable for the capacity that above 100KN test. QualifyASTM、ISO、JIS、GB standard with material and end product. High rigid frame structure and precise servo motor transmission parts supply tha...

QC-50AM2F & 500M2F Computerized Tensile (compression) testing machine Confirm to ISO 7500-1, JJG475-88 , ASTM E4 , DIN5122 , JIS B7721/B7733 , EN 10002-1,EN 1002-2,BS1610,GB228 Standard

This serial model is capable for the capacity that above 500KN is design for tensile test, compression test, bending testand all kind of test. The UTM with high torque servo motor and high rigidity, high strength...

QC-116 Digital Bursting Strength Tester Confirm to ISO-2759, GB/T 6545, JIS-P8112, JIS-L1018, ASTM-D2210, TAPPI-T403 Standard

Digital Bursting Strength Tester is used for testing the bursting resistance for samples such as base paper, corrugating paper, leather, synthetic leather. This tester is a digital type that features automatic co...

121M2F-Box Compression tester Confirm to ISO 12048、ISO 2872、ASTM D4169、TAPPI T804、GB T4857-4、JIS-Z-0403-2、ASTM D642、GBIT 16491、DIN 55440-1 Standard

• Manufacturer: cometech testing machines

QC-121M2F tests the compression capacity of large packaging material such as cartons, foams or styrofoam, etc. The tester simulates a testing condition similar to logistics and storaging industry in which cartons...

121M1F-Box Compression tester Confirm to ISO 12048、ISO 2872、ASTM D4169、TAPPI T804、GB T4857-4、JIS-Z-0403-2、ASTM D642、GBIT 16491、DIN 55440-1 Standard

• Manufacturer: cometech testing machines

QC-121M1F tests the compression capacity of large packaging material such as cartons, foams or styrofoam, etc. The tester simulates a testing condition similar to logistics and storaging industry in which cartons...

Vicat Heat Deflection Tester Confirm to ASTM D648 ISO 75-1 Standard

• Manufacturer: cometech testing machines

The specimen is given a fixed 10N force (or 50N) at the center with a standard Ø1 mm pin, and the temperature should increase by 50 (or 120) degrees Celsius per hour. When the penetration depth of specimen reache...

Motor Twist Counter for yarn, Manual twist counter for yarn Confirm to ISO 2061 ASTM D1422 BS-903 FZ-T10001 JIS L1095 Standard

• Manufacturer: cometech testing machines

This test machine uses the characteristics of different length of yarn after twisting. Use the pointer or sensor to detect changes in the yarn to figure the twist value of the measured object. This is a very impo...