Used Extruders

Gloucester 25225R2 Single Screw Extruder – 2.5" Dia., 32:1 L/D, 60 HP Motor
- Manufacturer: GloucesterGloucester
10755152 Used Gloucester Single Screw Extruder, Model 25225R2. 2.5' Diameter Screw, 32:1 L/D. Has an electrically heated, air cooled, and non-vented barrel at approximately a 65? center line height. Barrel is se...
Belvidere, IL
Trusted Seller
Wayne 1.25"
- Manufacturer: Wayne
Used 1.25” Wayne Single-Screw Extruder Driven by a 7.5 hp DC motor with SCR control,230 volt
Hainesport, NJ
Welex 3.5" 30:1 L/D Extruder – 150 HP, Vented Barrel, Melt Pump & Screen Changer
- Manufacturer: Welex
10755146 Used Welex 3.5" 30:1 L/D Extruder. Electrically heated water cooled (closed loop) and vented barrel at an approximate 69" center line height. Center line height can be reduced approximately 8" by removin...
Belvidere, IL
3.5″ NRM PM70 -24:1 N/VENTED AIR COOLED EXTRUDER
- Manufacturer: NRM
Rockville Centre, NY
Italtech Sandore Pasta Mixer Extruder – Model MX180DH | 200 kg/hr | 195mm Die | 8.5 kW | Built 2008
- Manufacturer: SandoreSandore
53530001 Used Italtech Sandore Pasta Mixer Extruder, Model MX180DH. 200 Kg/hour extrusion production; 30 kg extruder basin dough capacity; 50/kg mixer/kneader basin dough capacity; 195mm die dimension; Vacon X-Se...
Belvidere, IL
Trusted Seller
PRODEX 4.5"
- Manufacturer: PRODEX
Used 4.5" pelletizing line consisting of the following: - 4.5" Prodex 34/1 L/D vented extruder including strand die, Lufkin "Change Gear" gearbox with 15.03/1 reduction, and an hydraulic screen changer with pump....
Hainesport, NJ
Trusted Seller
DAVIS STANDARD 4.5"
- Manufacturer: Davis-Standard
Used 4.5" Davis Standard 30/1 L/D Extruder, Electrically Heated Air Cooled Barrel. Includes gearbox with 17.36/1 gear ratio rated at 321 hp. Serial #M3316, SO #05432. New 10/1991. Includes Kryenborg Type K-SWE-12...
Hainesport, NJ
Cincinnati Extruders (TC 86mm) CM 80 – CM 111(Several of each)
- Manufacturer: Cincinnati
Rockville Centre, NY
Trusted Seller
Motan 100
- Manufacturer: Motan
Used 300 lb. Motan model 100 desiccant dryer. No hopper included. Serial #9003860. 6 kW total heater load, 80-100 psi air, 2.3 HP. 240 volt AC input.
Hainesport, NJ
Trusted Seller
1997 PIOVAN T6000ix
- Manufacturer: Piovan
Used 6000 lb Piovan stainless steel drying hopper. New 1997. Hopper model T6000ix. Hoppers are approximately 60" o.d. X 14' tall.
Hainesport, NJ
Trusted Seller
CINCINATTI MILACRON 34" Wide
- Manufacturer: Cincinnati
Used 34" wide Cincinatti Milacron 2-roll sheet take-off with 34" face X 18" diameter rolls. Rolls are mounted in a vertical stack arrangement. Chromed and cored rolls with rotary unions, silent chain driven with ...
Hainesport, NJ
Trusted Seller
THORESON MCCOSH TD360
- Manufacturer: Thoreson McCosh
Used Thoreson McCosh Model TD360 desiccant dryer including approximately 1000 lb. hopper. Rated at approximately 360 lbs. per hour. Includes 10 hp 460 volt motor, Serial #971128.
Hainesport, NJ
Trusted Seller
THORESON MCCOSH TD-24
- Manufacturer: Thoreson McCosh
Used Thoreson McCosh Model TD-24 dehumidifying hopper dryer. Serial #206-152-10. Caster mounted dryer includes 50 lb. capacity insulated hopper mounted on stand. 24 CFM. 480 volt, 3 phase, 60 cycle operation at 9...
Hainesport, NJ
Trusted Seller
NOVATEC CDM-750
- Manufacturer: Novatec
- Model: CDM-750
Used Novatec Desiccant Dryer. Model CDM-750, serial number #12-095, new 1994. Has touch screen micro processor control model MCD-1002. Includes (2) approximatey 1000 lb hoppers with receivers and process heaters....
Hainesport, NJ
Trusted Seller
CONAIR 18010902
- Manufacturer: Conair
Used Conair hot air Dryer. Model 18010902, serial #137284. No hopper included.
Hainesport, NJ