Used controller in USA

Extruder Double Door Control Cabinet Mercery Contactors, Watlow Temperature

🔥Extruder Double Door Control Cabinet Mercery Contactors, Watlow Temperature No Motor Contactor or Drive Cabinet is for controlling the heating zones. Contact for freight quote. INV# P-2403

R and D CNC Machining 14-Lane Jam Depositor

• Manufacturer: R and D CNC Machining

R and D CNC Machining 14-Lane Jam Depositor - 48 in. wide depositing area- 2.5 in. wide lanes spread 7/8 in. apart- SS construction- Eaton hydraulic cylinder cut off- Chain driven positive displacement- SS intern...

R and D CNC Machining 11-Lane Jam Depositor

R and D CNC Machining 11-Lane Jam Depositor - 36 in. wide depositing area- 2 5/8 in. wide lanes spread 3/4 in. apart- SS construction- Eaton hydraulic cylinder cut off- Chain driven positive displacement- SS inte...

DAVIS STANDARD EXTRUDER MDL. MV35IN35SR

• Manufacturer: Davis-Standard
• Model: MV35IN35SR

107364 One (1) Used Davis Standard Extruder Model MV35IN35SR L/D BARREL HAVING A SEVEN (7) ZONE ELECTRICALLY HEATED, WATER COOLED (CLOSED LOOP), AND SIDE VENTED BARREL AT A 52" CENTERLINE HEIGHT. GEARBOX HAS A 5....

2016 American Kuhne AK 125 24.1 A/C EXT

• Manufacturer: Kuhne

Length‑to‑Diameter (L/D) Ratio: 24:1 Equipped With • Air‑Cooled Barrel with High Capacity Blow‑On Cooling • Heated Clamp / Breaker Plate • Feed Section with Water Jacket and Needle Valve • Melt Pressure and Tempe...

WAYNE 1.25"

• Manufacturer: Wayne

Used 1.25” Wayne Single-Screw Extruder Driven by a 7.5 hp DC motor with SCR control,230 volt

Davis-Standard Tandem Film Extrusion Coating Line

• Manufacturer: Davis-Standard

Davis-Standard Tandem Film Extrusion Coating Line Specsheet: Film Thickness: 1 mil - 15 mil Web Width: 30" - 80" Unwind Core Sizes: 3" / 6" / 10" Max. Unwind Roll Diameter: 45" Rewind Core Size: 6" Max. Rewi...

Gloucester 120/150

• Manufacturer: Gloucester

Conair (6) material tru blend loader blender feed hopper 4.5" Extrek hydraulic screen changer with hydraulic power pack, 14" diameter x 48" long cooling mandrel, Gloucester dual pull roll stand, 52" wide pull rol...

DAVIS STANDARD 150INDS-20

• Manufacturer: Davis-Standard

Used 1.5” Davis Standard Vented Single-Screw Extruder Model: 150IN DS-20 Driven by a nontagged motor and a Reliance model GV3000 AC drive Gearbox: 6.53:1 ratio, rated for 50 hp, 1.25 service factor, 152 rpm screw...

BATTENFELD GLOUCESTER 54

• Manufacturer: Battenfeld

Used 54" Wide Battenfeld Gloucester Co-Extrusion Sheet Extrusion Line, previously used for approximately 1200 lbs. per hour polypropylene sheet. 6" Batttenfeld Gloucester 30/1 L/D extruder driven by 500 hp AC mot...

Italtech Stainless Steel MXC 300 Continuous Pasta Mixer Extruder Machine

• Manufacturer: Italtech Food Technology

ITEM #: 20427 Used Italtech Stainless Steel MXC 300 Continuous Pasta Mixer Extruder Machine Serial Number: 2199Flour screw feeder/doser with hopper.Continuous high-speed turbo mixer, 66LBS capacity.Continuous low...