Used Processing in Ontario, Canada

Scott Equipment co. hammer mill SH18-12

• Manufacturer: Scott

-Model: SH18-12 -Baldor motor: 5HP, 1725 RPM, 208-230/460 Volts -Shipping dimensions: fits on a skid, sits 21" tall -Inlet is 27" x 20"

Lightnin Mixer

• Manufacturer: Lightnin

Agitator/ tank mixers Volt: 575, Phase: 3, HP: 1/2, AMPS: .9, RPM: 1725, Frame: 56C, manu Lightnin

Lightnin Mixer

• Manufacturer: Lightnin

Flange mount Volt: 115, RPM: 1725, AMPS: 6.6, Phase: 1, HZ:60, Serial #: 480523

Garland KT6-EA Electric Steam Kettle

• Manufacturer: Garland

-Kettle Serial number: WT0716-91J-03 -Model: KT6-EA -Cleveland Range LTD: Model: STD-28 -Serial number: WT1592-92G14 -Garland: Model: KT6-EA -Serial number: WT0716-91J03 -Has drawer

Brawn mixer LD33

• Manufacturer: Brawn

-Model # : LD33 -Serial # : 120021 Baldor motor: -Volts: 115/208-230 -Hp: .33 -Rpm: 1725 -Shaft size: 5/8

Open top plastic tank

-Nipple on bottom is 1/2" -Open top -Nipple on side is .5" -31" diameter -43.5 height -125 imp gall

Lightnin Mixer

• Manufacturer: Lightnin

-Shipping dimensions: 74" L x 63" W x 36" H -HP: 50/22 -575 V -RPM: 1770/1170 -60 hz

Pressure Reducing Valve

• Manufacturer: Norguan Excelon

-Shipping dimensions: 3" L x 3 1/2" W x 10" H -Input/output: 1/2" -Inlet: 250 PSIG, 17 Bar max -Outlet: 150 PSIG, 10.3 Bar max

Filter Regulator

• Manufacturer: Festo

-Shipping dimensions: 2 1/2" L x 3 1/2" W x 11" H -Input/output: 7/8" -p1 max: 16 bar, 230 psi/ 1,6 MPa -p2 max: 12 bar, 175 psi/1,2 MPa

Steel tank

-Tank dimensions: 145" tall x 62" -Cone bottom with a 3" drain -Top with lid -On steel legs

Littleford Mixer

• Manufacturer: Littleford

-Shipping dimensions of unit: 76” width x 111” length x 79” height -Base: 38” width x 82” length x 57” height -Model FKM-600-D -Jacketed with 75 PSI -Seimens motor: 15 HP, 230/ 460 V, 1760 RPM -Baldor motor: 10 H...

Lightnin Mixer

• Manufacturer: Lightnin

Model: lightnin, Model: XJ0117, Phase:3, RPM: 1725/1425, Top Mount V-230/460

thermal Transfer air Cooler for air compressor 2 of 2 partner is B1129

-Brand new in box -Maximum air pressure of 250 PSI and temperature of 350 F -Model number is AA65-1 Series -In wood crate

Thermal Transfer air Cooler for air compressor

• Manufacturer: Thermal transfer products ltd.

-Brand new in box -Maximum air pressure of 250 PSI and temperature of 350 F -Model number is AA65-1 Series -In wood crate

Large plastic tank

-Previously used for tall oil -2166 IMP -Circumference: about 19ft 6" -Diameter: about 6ft 2.5" -Height: about 13ft 2.5"