Used Sanders in Netherlands

2007 Boere Lacquer Sander Wide belt sander

• Manufacturer: Boere

Variable throughput; 25kW; Equipped with AL-KO mobile JET 250 extraction systems (LxWxH 2400x1000x2400); Aspiratori MHR672T7R vacuum extractor from 2014 (LxWxH; 1000x600x1300); additional sanding belt; original "...

2006 VANGROENWEGHE MBO-300-2KS/2KS TOP AND BOTTOM SANDER [SX-013048]

• Manufacturer: MBO

VANGROENWEGHE MBO-300 2KS/2KS Mastersander ... Top & Bottom Sander Machine is open on front side, allowing for sanding of frames. The fine sanding platens can be adjusted slightly slanted, particularly useful whe...

1980 STEINEMANN OSUS NOVA 190 FS VENEER SANDER (50 IN - 90 IN, 2-HEAD) [SX-012724]

• Manufacturer: Steinemann

STEINEMANN Type OSUS 190 FS Wide Belt Sander with the following features: -- (1) set of top & bottom opposed heads; motorized thickness opening 5/64" min. to 6" max. -- Each Head fitted with 201 kW (269 HP) Motor...

Fein Grit GX 75 Belt Sander

• Manufacturer: Fein

Fein Grit GX 75 Belt Sander

2002 Jet EHVS-80CS Belt Sander

Sanding belt can be tilted 90 degrees, without extraction

2014 Metallkraft MBSM 100-130 Belt Sander

• Manufacturer: Metallkraft
• Model: MBSM100-130

Includes 12 unused sanding belts

2006 FARMER KSM 1

• Manufacturer: Boere

BOERE KSM 1 Edge sanding machine Type;: KSM-1 | Length of work table: 900mm | Width of work table: 400mm | Table heigt: Height adjustable | Dimensions: 1.700 * 750 * 1.250 mm | Sanding aggregate tilting: 0-60° | ...

2006 BOERE KSM 1 Edge sanding machine

• Manufacturer: Boere

BOERE KSM 1 Edge sanding machine Type;: KSM-1 | Length of work table: 900mm | Width of work table: 400mm | Table heigt: Height adjustable | Dimensions: 1,700 * 750 * 1,250 mm | Sanding aggregate tilting: 0-60° | ...

1992 Samco Unilev 15

• Manufacturer: Samco
• Model: UNILEV 15

Samco Unilev edge sanding & veneer sanding Length of work tables: 1440mm | Width of work tables: 710mm | Work tables tilting: 0-30° | Belt dimensions: 2170 * 150 mm | Engine: 3 KW | Oscillating belt pneum.: 0 - 2...

2009 FlexTrim

• Manufacturer: FlexTrim

Engine: 0,75kW | Rpm: 150-600 rpm – variable RPM control | Dust extraction: ø125 | Dimensions brush: ø350 * 200 | Working height: Working height adjustment | Swivelling: Horizontal – vertical

Samon underslot tape

• Manufacturer: Samon

Ag_code: Slot sanders

2025 Dewulf MH240-1 Hopper

• Manufacturer: Dewulf

Presentation belt and 8 steel rollers Ag_code: Slot sanders | Content: 13-15m3 | Elements: 8.00

2004 breston dump 22500 X

• Manufacturer: Miedema

level regulation Ag_code: Slot sanders | Condition engine: Good | Condition transmission: Good | Appearance: Mediocre | Condition wear parts: Good | Working width: 2.40 | Content: 14