Used Threading & Tapping

Trusted Seller
2003 KINEFAC MC-25
- Manufacturer: KINEFAC
Equipped With * 6E Fanuc Controls * CP&P ** Machine setup to feed ball studs for threading Max. Threading Diameter (In-feed): 2-3/4" (70mm) Max. Thread Diameter (Thru-feed): 2-1/2" (65mm) Min. Diameter Infeed or ...
North America
Trusted Seller
2003 KINEFAC MC-25
- Manufacturer: KINEFAC
Equipped With * 6E Fanuc Controls * CP&P ** Machine setup to feed ball studs for threading Max. Threading Diameter (In-feed): 2-3/4" (70mm) Max. Thread Diameter (Thru-feed): 2-1/2" (65mm) Min. Diameter Infeed or ...
North America
Trusted Seller
REED A22
- Manufacturer: Reed
- Model: A22
Equipped With 3 Sets of Thread Roll Die Hangers/Holders Misc. Die
North America
Trusted Seller
KINEFAC MC-5F
- Manufacturer: KINEFAC
Equipped With Infeed/Thrufeed Max. Threading Diameter (In-feed): 2" Max. Thread Diameter (Thru-feed): 1-1/2" Max. Infeed Work length (w/axial match): 2-1/2"
North America
Trusted Seller
2005 YIEH CHEN YC-30
- Manufacturer: YIEH CHEN
Equipped With * Cam Operated Rolling Slide * Adjustable Skew * Cycle Timer * Adjustable Work Rest SPECIFICATIONS: Outside diameter 5/16"-1-9/16" WORKPIECE RANGE Thread pitch 40-8 TPI Max. length 6" Rolling speed ...
North America
Trusted Seller
1996 YIEH CHEN YC-20D
- Manufacturer: YIEH CHEN
Equipped With *Coolant system Max. center distance of die-spindle: 140mm Min. center distance of die-spindle: 100mm
North America
Trusted Seller
BAD DUBEN PRX15E
- Manufacturer: BAD DUBEN
Equipped With * Swivel Spindles Max. rolling pressure: 15 T (150kN) | Workpiece diameter: 6 - 40mm | Rolling slide stroke: 120mm | Max. tool diameter: 195mm | Spindle dia: 68.95mm | Max. swivel ange: 10deg | Roll...
North America
Trusted Seller
SENY D-80B
- Manufacturer: SENY
Equipped With Max. threading diameter: 1/4" - 3-1/8" | Maximum working pressure: 30tons | Infeed thread length: 7-3/4" | Thrufeed diameter: 1-1/2" | Electrics: 220V (15hp) | Weight, approx.: 7,000 lbs
North America
Trusted Seller
PRUTTON 125B-HV
- Manufacturer: Prutton
- Model: 125B-HV
Equipped With * Twin ferris wheel feeder drums Max. diameter: 1/4" | Max. thread length: 3" | Max. blank length: 3" | Underhead blank length: 4" | Speed: 600-800ppm (up to 1800 ppm w/air jet feed) | Weight, appro...
North America
Trusted Seller
2015 PEE-WEE P15U CNC
- Manufacturer: PEE WEE
Equipped With * Automatic central lubrication * Complete hydraulic system * PC control from Siemens with PEE-WEE CNC software * Control panel display Siemens * AC servo drive for E-pitch * Pressure & positioning ...
North America
Trusted Seller
BEARKAT KI-30
- Manufacturer: BEARKAT
Equipped With * Vibratory feeder bowl **Same die size as Sakamura SSR30 machine
North America
Trusted Seller
1998 YIEH CHEN YC-3
- Manufacturer: YIEH CHEN
Equipped With * Push Button Start/Stop * Cam Operated Rolling Slide * Adjustable Skew * Coolant Pump and Tank * Manual Lubrication * Work Support Workpiece Range: Roll Dies: Max. Center Distance of Die-Spindle: 1...
North America
Trusted Seller
KINEFAC MC-5F
- Manufacturer: KINEFAC
Equipped With Maximum In-Feed Diameter, w/3-3/4": Dies 1-1/2" Maximum In-Feed Work Length With Axial Match: 2-1/4" Maximum Applicable Radial Die Load: 12,900 (6tons)
North America
Trusted Seller
LANDIS 24PW "Lan-Hy-Rol"
- Manufacturer: Landis
Equipped With * Extended spindles Diameter range: 0-3" | Finest pitch -un or an: 48 TPI | Coarsest pitch -un or an: 2 TPI | Coarsest pitch acme: 4 TPI | Coarsest pitch worm thread: 7 Diameteral pitch/equivalent |...
North America
Trusted Seller
1981 REED B210
- Manufacturer: Reed
Equipped With * InFeed Only * 7-10 Sets of Dies * 1/2 dozen Work Blades * Hydraulic Tank
North America
Vigel UMRS 150 Threading & Tapping
- Manufacturer: Vigel
- Model: UMRS 150
Good condition Vigel UMRS 150 Threading & Tappings available between 1989 and 1999 years. Located in Italy and other countries. Click request price for more information.
Italy