Used Tanks & Kettles in Germany

5500 Liter 8 bar pressure tank, Aisi 304

remarks: 1 manhole approx. 320 x 420 mm in the front bottom (one tank is missing a manhole cover); tanks were attached as chamber tanks to other tanks - they would have to be supported accordingly on site for ins...

4000 liter flat bottom storage tank, Aisi 304

• Manufacturer: Schwarz

remarks: Tanks slightly out of round; outlet is lower than tank bottom (note this during installation); sheet metal cutouts in the lid; nameplate only present on 2 tanks; 1 tank with ball valve (see photos)

32.000 liter electrically heated tank, Aisi 316

remarks: Electric heating cables around parts of the tank; Diameter manhole cylinder 600 mm; Insulation with larger cutouts in insulation and insulation jacket; tank is currently provided with a transport lock; 1...

100000 liter heat-/coolable pressure tank, Aisi 304

• Manufacturer: Apparatebau Nordhausen

max. allowable working overpressure (dj): 2.0 bar Temperature control cylinder (dj): half-coil remarks: The double jacket (615 liter) is divided into a total of 4 chambers

Unused 1000 liter heat-/coolable tank, AISI316

max. allowable working overpressure (dj): 2.5 bar Temperature control cylinder (dj): half-coil

800 Liter storage tank with sight glass, Aisi 304

remarks: Diameter of hand hole approx. 350 mm; slight signs of corrosion inside

1000 liter tank, Aisi 304 with jet stream mixer

• Manufacturer: Ystral

remarks: Total height estimated (deviations possible); Agitator supports may need to be relined for installation; Diameter outlet end approx. 35 mm EX-proof: motor is ex-proof (compliance with the new ATEX direct...

15000 liter tank, AISI304 with welded insulation jacket

notice: some residues of previous content, pipe end cut flush

650 liter electropolished rectangular pharma tank, Aisi 316

remarks: internal (moveable) fixtures; the outlet was probably fitted with a fitting, but this is no longer available (see photos)

4000 liter insulated pressure tank, Aisi 304

remarks: Manhole approx. 335 x 445 mm; Tank with dents inside and outside (see photos); former heating jacket no longer functional; Inner tank was successfully tested for leaks at 3 bar

29250 liter horizontal storage tank, Aisi 316

• Manufacturer: Hinke

max. allowable working temperature: 100 °C remarks: Manhole diameter: approx. 600 mmm; saddles made of Aisi 304

15000 Liter insulated pressure tank, Aisi 304

remarks: Steel heating pipes 2" in the skirt below the bottom of the tank

300 liter heat-/coolable tank, Aisi 304

remarks: total height without screwed clipboard approx. 1000 mm; a pneumatic valve with a DN 32 DIN 11851 outlet is screwed to the outlet material temperatur control system: AISI 304 (V2A) 1.4301

26500 liter standing storage tank, Aisi304

Volume: 26.500 liter | Stand type: flat bottom with slope | Diameter inside: 2.590 mm | Cylindrical height: 4.900 mm | Total height: 5.300 mm | Manhole: in the cylinder | Technical equipment: crane eyes | Outlet...

15000 liter standing storage tank, Aisi304

• Manufacturer: Goavec

Volume: 15.000 liter | Lower bottom: cone shaped bottom | Stand type: legs height adjustable | Quantity legs: 3 Piece | Ground clearance: 1000 mm | Diameter outside: 3.100 mm | Cylindrical height: 2.000 mm | Tot...