Used Tanks & Kettles in Bremen, Germany

2200 liter stainless steel 316 vessel

remarks: 1 welded stainless steel bar above the tank opening; 1 tank with DN 100 DIN 11851 outlet (disc tap without hand lever)

2600 Liter pressure vessel, Aisi 316

notice: some residues of previous content, pipe end cut flush remarks: Test pressure according to type plate: 3 bar; 1 tank with 1 dent in the transition between cylinder and upper bottom; in addition, one of the...

53000 liter heatable/coolable horizontal vessel made of stainless steel 304

• Manufacturer: Hinke

Temperature control cylinder (dj): squared half-coil remarks: 3 reinforcement rings Fe with 2 feet each (Attention: tank diameter lower than tank feet; note when setting up); 1 manhole in the front floor material...

500 liter stainless steel 316 vessel

• Manufacturer: Apparate- und Behältertechnik Harrislee

remarks: Several pipes inside the tank; loose flanges made of Fe (galvanized)

800 liter heat-/coolable pharma vessel, Aisi 316

Temperature control cylinder (dj): double jacket remarks: Name plate not available anymore: according to last user the tank and jacket was vakuum and pressure rated; frame made of Aisi 304; electrical level indic...

8000 liter mixing vessel, Aisi 304, with blade stirrer

• Manufacturer: Behälter KG

max. allowable working temperature: 100 °C Technical documentation: drawing,German Technical Supervisory Association TÜV documents remarks: 1 tank with a dent in the cylindrical part as well as in the fan guard o...

1000 liter stainless steel 304 vessel

remarks: Manhole diameter 420 mm; 2 longitudinal sight glasses in the cylinder; outlet fitting (disk tap) incomplete

1000 liter stainless steel 316 vessel

• Manufacturer: Holvrieka

remarks: 2 longitudinal sight glasses in the cylinder; outlet fitting (disk tap) incomplete

60000 liter isolated agitatortank, Aisi 304 with Blade stirrer

Volume: 60.000 liter | Bottom: cone shaped bottom | Stand type: skirt support | Insulation: available | Diameter inside: 3.700 mm | Diameter outside: 3.880 mm | Total height: 9.200 mm | Manhole: in the cylinder ...

200 liter open rectangular tub, Aisi 304

remarks: Basic dimensions inside approx. 1,000 x 1,000 mm; Interior height approx. 190 mm (slight gradient towards the outlet); small dents in the bottom (see photos)

580 L stainless steel transport box AISI304 (1,2 x 0,8 x 1,0 m)

remarks: lid can be opened; inner height: approx. 750 mm; opening that cannot be completely closed and 4 open slots on the inside (goes into the lower part of the frame; see photos)

90 liter jacketed processing vessel with anchor stirrer, Aisi 316

• Manufacturer: Behälter KG

Temperature control cylinder (dj): half-coil remarks: support brackets made of mild steel; flanges partly made of mild steel; handhole cover cladded, former connection in the cylinder was welded closed by the for...

60 liter mobile stainless steel 316 vessel

• Manufacturer: Bolz

remarks: Mobile frame made of stainless steel 304; diameter of hand hole approx. 145 mm; vessel without bottom outlet

8100 Liter ungebrauchter heiz-/kühlbarer Lagertank aus V4A

max. allowable working temperature: 80 °C max. allowable working overpressure (dj): 3.0 bar max. allowable working temperature (dj): 110 °C Temperature control cylinder (dj): thermoplate temperature control botto...

25000 Liter heat-/coolable mixingtank, Ais304 with blade stirrer

• Manufacturer: Ullmann

max. allowable working overpressure (dj): 3.0 bar Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket