Used Tanks & Kettles in Bremen, Germany

63 liter insulated pressure tank, Aisi 304

max. allowable working temperature: 135 °C remarks: 2 support brackets, stainless steel; smaller dents and smaller sheet metal cuts in the insulation jacket

3300 liter heat-/coolable storage tank, Aisi 316

max. allowable working overpressure (dj): 2.5 bar max. allowable working temperature (dj): 60 °C Temperature control cylinder (dj): half-coil

22000 liter insulated heat-/coolable tank, AISI304

max. allowable working overpressure (dj): 1.0 bar Temperature control cylinder (dj): thermoplate temperature control bottom (dj): thermoplate remarks: dent in lower insulation jacket, no warranty on heat-/cooling...

870 Liter heatable/coolable pressure tank, Aisi 304

max. allowable working overpressure (dj): 2.0 bar Temperature control cylinder (dj): thermoplate temperature control bottom (dj): thermoplate

100000 liter heat-/coolable pressure tank, Aisi 304

• Manufacturer: Apparatebau Nordhausen

max. allowable working overpressure (dj): 2.0 bar Temperature control cylinder (dj): half-coil remarks: The double jacket (615 liter) is divided into a total of 4 chambers

Unused 1000 liter heat-/coolable tank, AISI316

max. allowable working overpressure (dj): 2.5 bar Temperature control cylinder (dj): half-coil

800 Liter storage tank with sight glass, Aisi 304

remarks: Diameter of hand hole approx. 350 mm; slight signs of corrosion inside

1000 liter tank, Aisi 304 with jet stream mixer

• Manufacturer: Ystral

remarks: Total height estimated (deviations possible); Agitator supports may need to be relined for installation; Diameter outlet end approx. 35 mm EX-proof: motor is ex-proof (compliance with the new ATEX direct...

15000 liter tank, AISI304 with welded insulation jacket

notice: some residues of previous content, pipe end cut flush

650 liter electropolished rectangular pharma tank, Aisi 316

remarks: internal (moveable) fixtures; the outlet was probably fitted with a fitting, but this is no longer available (see photos)

3340 liter insulated pressure tank, Aisi 304

max. allowable working temperature: 150 °C Volume: 3.340 liter | Vacuum: 1,0 bar | Max. excess pressure: 3,0 bar | Stand type: legs height adjustable | Quantity legs: 3 Piece | Insulation: available | Insulating ...

800 Liter insulated pressure tank, Aisi 316

max. allowable working temperature: 130 °C Technical documentation: drawing,German Technical Supervisory Association TÜV documents remarks: Attention: outlet fitting extends beyond foot ends (former foot extensio...

100 liter mobile pressure tank, Aisi 304

Volume: 100 liter | Max. excess pressure: 0.4 bar | Bottom: torispherical bottom | Stand type: moveable on wheels | Diameter outside: 356 mm | Cylindrical height: 1.000 mm | Total height: 1.700 mm | Total width:...

710 liter insulated pressure tank, Aisi 316

max. allowable working temperature: 130 °C Technical documentation: drawing,German Technical Supervisory Association TÜV documents remarks: Attention: outlet fitting extends beyond foot ends (former foot extensio...

1100 liter insulated pressure tank, Aisi 316

• Manufacturer: Diessel

max. allowable working temperature: 130 °C remarks: Small dents in the insulation jacket; outlet fitting incomplete; one of the feet is pressed into the inner bottom (see photos)