Used Tanks & Kettles in Bremen, Germany

100 liter heat-/coolable tank, Aisi 316

Temperature control cylinder (dj): half-coil agitator features: agitator shaft made of mild steel; 1 dent in the fan guard of the motor

1250 liter insulated Cip-tank, Aisi 304

remarks: Slight differences in the design of the two tanks; dents in the insulation jacket of the lower bottom; 1 tank also has 1 dent in the insulation jacket in the cylinder area (this tank also lacks the spray...

300 liter mobile tank, Aisi 304

remarks: 1 strong dent in the upper cylinder area and 1 kink in the outlet pipe (see photos)

2000 liter heat-/coolable tank, Aisi 316

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Tank lid, Aisi 304; Tank with dents inside, tank lid bulging outwards (probably due to overpressure in the ...

1027 liter horizontal pressure tank, Aisi 304

remarks: Tanks lie loosely in frames, made of Aisi 304, which are screwed together in pairs; 1 hand hole each approx. 215 x 240 mm in the front bottom (plastic hand hole cover); 1 pipe inside; 2 tanks outlet inne...

1000 liter horizontal pressure tank, Aisi304

• Manufacturer: Duotank

remarks: Plastic manhole cover; tanks are stackable (see photos)

2500 liter oval storage tank, Aisi 304

• Manufacturer: H. BAUER Maschinen- und Apparatebau

remarks: 1 manhole in the front bottom; Tank 1 with stacking device (can be used to stack tank 2 (without stacking device); tanks were professionally cleaned and overhauled in 2024; brand new residual drain valve...

8870 liter horizontal winery storage tank, Aisi 304

remarks: 1 oval manhole (340 x 440) in the front floor; tank photos show a group of nearly identical tanks, including this tank (not exactly these containers)

3020 Liter pressure tank, Aisi 304

remarks: Slight differences in the design of the two tanks (e.g. 1 tank slightly lower in overall height); 1 manhole approx. 320 x 420 mm in the cylinder; 1 screwed-on outlet fitting with disc valve enlarges the ...

16000 liter heatable storage tank, Aisi304

remarks: Full pipe coil inside the tank (lower cylinder area) available

750 liter heat-/coolable tank, Aisi 316

• Manufacturer: Manfred Roth

max. allowable working temperature: 100 °C max. allowable working overpressure (dj): 1.5 bar max. allowable working temperature (dj): 95 °C temperature control bottom (dj): double jacket remarks: Inner tank in "f...

120 liter pressure tank, Aisi 304

remarks: 1 hand hole approx. 80 x 95 mm in the upper bottom; tank without outlet in the lower bottom; tank with smaller dents

27200 liter storage tank, Aisi 316

• Manufacturer: INOX - MAURER AG

notice: some residues of previous content, manhole cover plated remarks: Stand frame, Aisi 304; wall thickness of the lowest cylinder segment approx. 6 mm; 2 of these tanks are from the manufacturer Metkon, but a...

12500 Liter heat-/coolable tank, Aisi 304

• Manufacturer: Rieger

Temperature control cylinder (dj): thermoplate remarks: Heating / cooling jacket (Thermoplate) by approx. 1,220 mm of the cylinder height; Manhole approx. 325 x 425 mm; 1 handhole diameter 200 mm in the upper bot...

1800 liter double chamber tank, AISI304

remarks: Double chamber tank 1800 liters (1 x 1300 liters, 1 x 500 liters); one manhole diameter approx. 415 mm per chamber; 1 outlet per chamber (1 x inner pipe diameter approx. 35 mm, 1 x inner pipe diameter ap...